3,232 research outputs found

    The biomechanical characteristics of high-performance endurance running

    Get PDF
    The biomechanical profile of high-level endurance runners may represent a useful model that could be used for developing training programmes designed to improve running style. This study, therefore, sought to compare the biomechanical characteristics of high-performance and recreational runners. Kinematic and kinetic measurements were taken during overground running from a cohort of 14 high-performance (8 male) and 14 recreational (8 male) runners, at four speeds ranging from 3.3 to 5.6 m s−1. Two-way ANOVA analysis was then used to explore group and speed effects and principal component analysis used to explore the interdependence of the tested variables. The data showed the high-performance runners to have a gait style characterised by an increased vertical velocity of the centre of mass and a flight time that was 11% longer than the recreational group. The high-performance group were also observed to adopt a forefoot strike pattern, to contact the ground with their foot closer to their body and to have a larger ankle moment. Importantly, although observed group differences were mostly independent of speed, the tested variables showed a high degree of interdependence suggesting an underlying unitary phenomenon. This is the first study to compare high-performance and recreational runners across a full range of kinematic and kinetic variables. The results suggest that high-performance runners maintain stride length with a prolonged aerial phase, rather than by landing with a more extended knee. These findings motivate future intervention studies that should investigate whether recreational runners could benefit from instruction to decrease shank inclination at foot contact

    A marker set for measuring the kinematics of the lumbar spine and thoracic spine during running : a technical note

    Get PDF
    A protocol for tracking the motion of the lumbar spine, which uses seven skin mounted markers, has been adopted in previous studies investigating running. However, this configuration of can be difficult to track with passive motion capture systems. This study therefore investigated whether a four-marker configuration could accurately reproduce the pose of the lumbar spine obtained using the seven-marker configuration. The study also investigated two methods of tracking the thorax. The first method consisted of markers attached to the sterum and the second used two markers placed bilaterally over the acromioclavicular joints and another on the posterior thoracic spine. Kinematic data was collect for n=15 male subjects and the pose, calculated using the different tracking configurations, compared for both the lumbar spine and thoracic spine. The results demonstrated a good match between two lumbar tracking marker sets. However, there was considerable difference between the two thoracic markers sets which was likely due to movement of the arms influencing the pose of the thorax. We therefore recommend the use of four makers to track the motion of the lumbar spine and a rigid plate, mounted at the top of the sternum, to track motion of the thoracic spine during running

    Reproducibility of kinematic measures of the thoracic spine, lumbar spine and pelvis during fast running

    Get PDF
    This study evaluated the reproducibility of the angular rotations of the thoracic spine, lumbar, spine, pelvis and lower extremity during running. In addition, the study compared kinematic, reproducibility between two methods for calculating kinematic trajectories: a six degrees of freedom, (6DOF) approach and a global optimisation (GO) approach. With the first approach segments were, treated independently, however with GO approach joint constraints were imposed to stop translation, of adjacent segments. A total of 12 athletes were tested on two separate days whilst running over, ground at a speed of 5.6ms-1. The results demonstrated good between-day reproducibility for most, kinematic parameters in the frontal and transverse planes with typical angular errors of 1.4-3°., Acceptable repeatability was also found in the sagittal plane. However, in this plane, although, kinematic waveform shape was preserved between testing session, there were sometimes shifts in, curve offset which lead to slightly higher angular errors, typically ranging from 1.9-3.5°. In general, the, results demonstrated similar levels of reproducibility for both computational approaches (6DOF and, GO) and therefore suggest that GO may not lead to improved kinematic reproducibility during running

    Spatiotemporal features of early neuronogenesis differ in wild-type and albino mouse retina

    Get PDF
    In albino mammals, lack of pigment in the retinal pigment epithelium is associated with retinal defects, including poor visual acuity from a photoreceptor deficit in the central retina and poor depth perception from a decrease in ipsilaterally projecting retinal fibers. Possible contributors to these abnormalities are reported delays in neuronogenesis (Ilia and Jeffery, 1996) and retinal maturation (Webster and Rowe, 1991). To further determine possible perturbations in neuronogenesis and/or differentiation, we used cell-specific markers and refined birth dating methods to examine these events during retinal ganglion cell (RGC) genesis in albino and pigmented mice from embryonic day 11 (E11) to E18. Our data indicate that relative to pigmented mice, more ganglion cells are born in the early stages of neuronogenesis in the albino retina, although the initiation of RGC genesis in the albino is unchanged. The cellular organization of the albino retina is perturbed as early as E12. In addition, cell cycle kinetics and output along the nasotemporal axis differ in retinas of albino and pigmented mice, both absolutely, with the temporal aspect of the retina expanded in albino, and relative to the position of the optic nerve head. Finally, blocking melanin synthesis in pigmented eyecups in culture leads to an increase in RGC differentiation, consistent with a role for melanin formation in regulating RGC neuronogenesis. These results point to spatiotemporal defects in neuronal production in the albino retina, which could perturb expression of genes that specify cell fate, number, and/or projection phenotyp

    Discovery, activity and characterisation of an AA10 lytic polysaccharide oxygenase from the shipworm symbiont Teredinibacter turnerae

    Get PDF
    Background: The quest for novel enzymes for cellulosic biomass-degradation has recently been focussed on lytic polysaccharide monooxygenases (LPMOs/PMOs), Cu-containing proteins that catalyse the oxidative degradation of otherwise recalcitrant polysaccharides using O2 or H2O2 as a co-substrate. Results: Although classical saprotrophic fungi and bacteria have been a rich source of lytic polysaccharide monooxy genases (LPMOs), we were interested to see if LPMOs from less evident bio-environments could be discovered and assessed for their cellulolytic activity in a biofuel context. In this regard, the marine shipworm Lyrodus pedicellatus represents an interesting source of new enzymes, since it must digest wood particles ingested during its natural tunnel boring behaviour and plays host to a symbiotic bacterium, Teredinibacter turnerae, the genome of which has revealed a multitude of enzymes dedicated to biomass deconstruction. Here, we show that T. turnerae encodes a cellulose-active AA10 LPMO. The 3D structure, at 1.4 Å resolution, along with its EPR spectrum is distinct from other AA10 polysaccharide monooxygenases insofar as it displays a “histidine-brace” catalytic apparatus with changes to the surrounding coordination sphere of the copper. Furthermore, TtAA10A possesses a second, surface accessible, Cu site 14 Å from the classical catalytic centre. Activity measurements show that the LPMO oxidises cellulose and thereby signifcantly augments the rate of degradation of cellulosic biomass by classical glycoside hydrolases. Conclusion: Shipworms are wood-boring marine molluscs that can live on a diet of lignocellulose. Bacterial sym bionts of shipworms provide many of the enzymes needed for wood digestion. The shipworm symbiont T. turnerae produces one of the few LPMOs yet described from the marine environment, notably adding to the capability of shipworms to digest recalcitrant polysaccharides

    Monitoring ground movement at Volcán de Colima, Mexico, using Sentinel-1 data and SqueeSAR®

    Get PDF
    Volcán de Colima is a highly active stratovolcano in western Mexico which presents a significant hazard to over 300,000 people who live within ca 40 km of the volcano. Due to its persistent activity, the volcano is actively monitored and researched, and understanding the patterns of behaviour is vital to accurate hazard assessment. Sentinel-1 SAR images from ascending and descending orbits allow 1D and 2D ground motions to be retrieved using multi-interferogram techniques. SqueeSAR®’s unique processing allows a better characterisation of subtle ground movements in remote, rural mountainous areas compared to many other multi-interferogram techniques. A dataset of 147 SAR scenes (2017-2019) has been processed to show patterns of lava subsidence (<150 mm of downward vertical deformation over 2 years), as well as volcano deflation and apparent westward lateral movement. These data indicate that viscous andesitic lava flows may remain mobile for years following eruption and emplacement, and that the entire volcanic edifice is subsiding. Despite the apparent quiescence, volcanic edifices can remain highly dynamic after the termination of explosive or effusive activity. We interpret that the western flank of Volcán de Colima may become steeper with time and may be of long-term concern for hazard assessment activities. Thematic collection: This article is part of the Remote sensing for site investigations on Earth and other planets collection available at: https://www.lyellcollection.org/topic/collections/remote-sensing-for-site-investigations-on-earth-and-other-planet

    A novel application of capnography during controlled human exposure to air pollution

    Get PDF
    BACKGROUND: The objective was to determine the repeatability and stability of capnography interfaced with human exposure facility. METHODS: Capnographic wave signals were obtained from five healthy volunteers exposed to particle-free, filtered air during two consecutive 5 min intervals, 10 min apart, within the open and then the sealed and operational human exposure facility (HEF). Using a customized setup comprised of the Oridion Microcap(® )portable capnograph, DA converter and AD card, the signal was acquired and saved as an ASCII file for subsequent processing. The minute ventilation (VE), respiratory rate (RR) and expiratory tidal volume (V(TE)) were recorded before and after capnographic recording and then averaged. Each capnographic tracing was analyzed for acceptable waves. From each recorded interval, 8 to 19 acceptable waves were selected and measured. The following wave parameters were obtained: total length and length of phase II and III, slope of phase II and III, area under the curve and area under phase III. In addition, we recorded signal measures including the mean, standard deviation, mode, minimum, maximum – which equals end-tidal CO(2 )(EtCO(2)), zero-corrected maximum and true RMS. RESULTS: Statistical analysis using a paired t-test for means showed no statistically significant changes of any wave parameters and wave signal measures, corrected for RR and V(TE), comparing the measures when the HEF was open vs. sealed and operational. The coefficients of variation of the zero-corrected and uncorrected EtCO(2), phase II absolute difference, signal mean, standard deviation and RMS were less than 10% despite a sub-atmospheric barometric pressure, and slightly higher temperature and relative humidity within the HEF when operational. CONCLUSION: We showed that a customized setup for the acquisition and processing of the capnographic wave signal, interfaced with HEF was stable and repeatable. Thus, we expect that analysis of capnographic waves in controlled human air pollution exposure studies is a feasible tool for characterization of cardio-pulmonary effects of such exposures

    Labrador retrievers under primary veterinary care in the UK: demography, mortality and disorders

    Get PDF
    Abstract Background Labrador retrievers are reportedly predisposed to many disorders but accurate prevalence information relating to the general population are lacking. This study aimed to describe demography, mortality and commonly recorded diseases in Labrador retrievers under UK veterinary care. Methods The VetCompass™ programme collects electronic patient record data on dogs attending UK primary-care veterinary practices. Demographic analysis covered all33,320 Labrador retrievers in the VetCompass™ database under veterinary care during 2013 while disorder and mortality data were extracted from a random sample of 2074 (6.2%) of these dogs. Results Of the Labrador retrievers with information available, 15,427 (46.4%) were female and 15,252 (53.6%) were male. Females were more likely to be neutered than males (59.7% versus 54.8%, P <  0.001). The overall mean adult bodyweight was 33.0 kg (SD 6.1). Adult males were heavier (35.2 kg, SD 5.9 kg) than adult females (30.4 kg, SD 5.2 kg) (P <  0.001). The median longevity of Labrador retrievers overall was 12.0 years (IQR 9.9–13.8, range 0.0–16.0). The most common recorded colours were black (44.6%), yellow (27.8%) and liver/chocolate (reported from hereon as chocolate) (23.8%). The median longevity of non-chocolate coloured dogs (n = 139, 12.1 years, IQR 10.2–13.9, range 0.0–16.0) was longer than for chocolate coloured animals (n = 34, 10.7 years, IQR 9.0–12.4, range 3.8–15.5) (P = 0.028). Of a random sample of 2074 (6.2%) Labrador retrievers under care in 2013 that had full disorder data extracted, 1277 (61.6%) had at least one disorder recorded. The total number of dogs who died at any date during the study was 176. The most prevalent disorders recorded were otitis externa (n = 215, prevalence 10.4%, 95% CI: 9.1–11.8), overweight/obesity (183, 8.8%, 95% CI: 7.6–10.1) and degenerative joint disease (115, 5.5%, 95% CI: 4.6–6.6). Overweight/obesity was not statistically significantly associated with neutering in females (8.3% of entire versus 12.5% of neutered, P = 0.065) but was associated with neutering in males (4.1% of entire versus 11.4% of neutered, P < 0.001). The prevalence of otitis externa in black dogs was 12.8%, in yellow dogs it was 17.0% but, in chocolate dogs, it rose to 23.4% (P < 0.001). Similarly, the prevalence of pyo-traumatic dermatitis in black dogs was 1.1%, in yellow dogs it was 1.6% but in chocolate dogs it rose to 4.0% (P = 0.011). Conclusions The current study assists prioritisation of health issues within Labrador retrievers. The most common disorders were overweight/obesity, otitis externa and degenerative joint disease. Males were significantly heavier females. These results can alert prospective owners to potential health issues and inform breed-specific wellness checks

    Quantum Computing

    Full text link
    Quantum mechanics---the theory describing the fundamental workings of nature---is famously counterintuitive: it predicts that a particle can be in two places at the same time, and that two remote particles can be inextricably and instantaneously linked. These predictions have been the topic of intense metaphysical debate ever since the theory's inception early last century. However, supreme predictive power combined with direct experimental observation of some of these unusual phenomena leave little doubt as to its fundamental correctness. In fact, without quantum mechanics we could not explain the workings of a laser, nor indeed how a fridge magnet operates. Over the last several decades quantum information science has emerged to seek answers to the question: can we gain some advantage by storing, transmitting and processing information encoded in systems that exhibit these unique quantum properties? Today it is understood that the answer is yes. Many research groups around the world are working towards one of the most ambitious goals humankind has ever embarked upon: a quantum computer that promises to exponentially improve computational power for particular tasks. A number of physical systems, spanning much of modern physics, are being developed for this task---ranging from single particles of light to superconducting circuits---and it is not yet clear which, if any, will ultimately prove successful. Here we describe the latest developments for each of the leading approaches and explain what the major challenges are for the future.Comment: 26 pages, 7 figures, 291 references. Early draft of Nature 464, 45-53 (4 March 2010). Published version is more up-to-date and has several corrections, but is half the length with far fewer reference
    corecore