260 research outputs found

    Recuperación de minas e instalaciones mineras antiguas

    Get PDF
    Hoy en día, todos los países con un reconocido prestigio minero vuelven la vista atrás, hacia sus instalaciones mineras antiguas, desarrollando una importante labor para su reconversión y recuperación. Esta tendencia se debe en parte al interés progresivo que muestra nuestra sociedad del ocio-bienestar por el turismo, generando una enorme demanda dirigida hacia elementos auténticos, arraigados durante siglos. Como consecuencia de este fenómeno asistimos al despegue del turismo rural y de las rutas que recuperan instalaciones industriales históricas. Dentro de este marco surgió la alternativa de la conservación y gestión del patrimonio minero como opción educativa, cultural y de ocio. Actualmente la reconstrucción de labores e instalaciones que antiguamente albergaban explotaciones mineras, se ha impuesto a la idea de "museo almacén" donde se guardan objetos antiguos. A modo de ejemplo podemos destacar que, solamente en Europa, se ha realizado la conversión de más de 500 minas e instalaciones minero-metalúrgicas antiguas en museos de la minería, museos del territorio, ecomuseos, parques recreativos, etc. Un ejemplo del interés que actualmente se demuestra por este tipo de proyectos; se observa en el plano económico. De tal forma que las inversiones realizadas en estos temas suelen ser apoyadas por instituciones públicas, contando con el apoyo de programas comunitarios de desarrollo (Rechar, Leader, Proder, Interreg, Feder, etc.) , que pueden cubrir una parte importante de dicha inversión. Por ejemplo, en el Museo de la Minería de Castilla y León que se ubicará en torno a la ferrería de San Bias, en Sabero (León), las ayudas gestionadas por la Junta de Castilla-León superan la cifra de los 1.000 millones de pesetas. Actualmente existen antecedentes suficientes para poder asegurar la obtención de ayudas procedentes de los fondos europeos, de índole pública, de ámbito local e incluso a través del mecenazgo y la publicidad

    El cromo en las aguas de consumo público de la provincia de Valencia y su relación con el impacto ambiental

    Get PDF
    The presence of chromium in potable water of the Valencia province has been determined in several samples, taken from the 16 different zones of this area. Only in 20% of the zones tested a positive result was found. Most of the municipiums in which chromium was detected on potable waters, were placed in the coastal areas, having their water supplies located on porosity vulnerable grounds close to industrial zones and liquid and solid residues dumpingplaces.Para estudiar la presencia de cromo en el agua de consumo público de la provincia de Valencia, ha sido realizado un muestreo en las 16 comarcas que la constituyen dando positivo en un 20% de ellas. La mayoría de los municipios en los que se detectó cromo, en sus aguas potables, estaban situados en la zona costera, con abastecimientos sobre terrenos vulnerables por porosidad, con industrias cercanas, y con vertederos de residuos sólidos y líquidos próximos, también sobre vuelos vulnerables a la contaminación

    Gravity modeling of the lithosphere in the Calatrava Volcanic Province (Spain): geodynamic implications

    Get PDF
    The origin of the intraplate volcanism in the Calatrava Volcanic Province (CVP) is controversial. On the basis of its geochemical signature it has been ascribed to an “aborted” rift, implying lithospheric thinning. However, the volcanism occurred during the generalized Cenozoic NW−SE-oriented compressive tectonic regime. On the other hand, on the basis of evidence for its deep-seated origin, it has been linked to the existence of a baby-plume detached from an active megaplume below the Canary-Azores Islands and the western Mediterranean. In order to understand better the aforementioned geodynamic scenarios for the origin of the CVP, we address here the study of the lithosphere in the CVP and its vicinity by means of gravity analysis and 2+1/2D modeling. Gravity modeling results do not support the rifting model adopted for the intraplate volcanism occurred in the CVP because the crust shows a constant thickness. Density models suggest the existence of a sub-crustal, anomalous low-density block that could be underplated magmatic material at the base of the crust, suggesting that only a minor part of it intruded up into the crust and erupted. The localized magmatism of the CVP can be related to the combination of two factors: one active, the gentle folding of the Iberian lithosphere and associated uplifting of the Variscan basement due to the NW-directed transmission of compressive stresses in the upper plate yielded by the subduction/collision in the south Iberian margin. The formation of the lithospheric folding in the Calatrava region results in a decrease of the pressure beneath the swell of the antiform that is likely to bring about basaltic magmatism below the swell; and one passive, the existence of a Variscan right-lateral shear band, which yields a weakened  crust that facilitates the ascent of the magmatic materials. The relatively small volume, but large extension, of the volcanic outcrops could be associated with the preferential ascent of the magmas along the weakened crust of this NW−SE-trending Variscan shear band.El origen del volcanismo intraplaca en la Provincia Volcánica de Calatrava (CVP) es controvertido. En base a su signatura geoquímica se ha atribuido a la formación de un rift “abortado”, implicando un adelgazamiento litosférico. Sin embargo, el volcanismo se desarrolló durante un régimen tectónico compresivo orientado NW-SE que fue generalizado en la región de Calatrava durante el Cenozoico. Por otro lado, en base a las evidencias de su origen profundo, se le ha relacionado con la existencia de una mini-pluma desconectada de una mega-pluma activa debajo de los archipiélagos de Canarias y Azores, y en el Mediterráneo occidental. Con el propósito de contribuir a la discriminación entre los escenarios geodinámicos mencionados para el origen del volcanismo se ha abordado aquí el estudio de la litosfera en la CVP y en las zonas próximas mediante el análisis gravimétrico y la modelación 2+1/2D. Los modelos gravimétricos no apoyan el modelo de rifting adoptado para el volcanismo intraplaca ocurrido en la CVP porque el espesor de la corteza es cuasi-constante. Los modelos siguieren la existencia de un cuerpo anómalo sub-cortical de baja densidad que podría ser material magmático acrecionado y almacenado en la base de la corteza indicando que sólo una parte menor habría intruido en la corteza y producido erupciones. El volcanismo localizado de la CVP se puede relacionar con la combinación de dos factores: a) Un factor activo correspondiente a un amplio plegamiento de la litosfera (corteza) Ibérica y el consiguiente levantamiento asociado del basamento varisco debido a la transmisión hacia el NW de los esfuerzos compresivos en la placa superior de la subducción/colisión miocena en el margen meridional Ibérico. La formación del anticlinal a escala cortical en la región de Calatrava ha producido la disminución de la presión en el intrados del anticlinal y ha originado probablemente el magmatismo basáltico; b) Un factor pasivo correspondiente a la existencia de una banda de cizalla con dirección próxima a NW-SE, heredada de la deformación varisca, que localiza una zona de debilidad cortical favorecedora del ascenso del magmatismo

    Plomo en aguas de consumo público de la provincia de Valencia

    Get PDF
    Questions made in a poll ellaborated in Department of Chemical Physics about the practices of Instrumental Techniques subject have been analyzed by mean of statistical procedures. Cluster analysis, variables dependence inference and n way classification have been the methods principally used. The results found case the elimination of unnecessary questions allowing its optimization. Besides, it helps the correct interpretation of the poll results.Mediante procedimientos estadísticos se ha analizado la hoja de preguntas empleada en una encuesta sobre las prácticas de la .asignatura de Técnicas Instrumentales. Los métodos utilizados han sido fundamentalmente el de análisis cluster, el de inferencia sobre la dependencia de las variables y el de clasificación con arreglo a n criterios. Los resultados encontrados facilitan la eliminación de preguntas innecesarias permitiendo así su optimización, a la vez que ayudan a interpretar más correctamente los resultados de la encuesta

    Contaminantes emergentes en las aguas del Parque de Doñana

    Get PDF
    El Parque Nacional de Doñana, declarado Patrimonio de la Humanidad por la UNESCO en 1994, es la reserva biológica más importante de España, y la mayor área protegida. Es un ecosistema único en toda Europa, debido a su gran diversidad ecológica. Las dunas, playas y marismas forman parte de este espacio característico que constituye una ruta de migración e hibernación preferente para miles de aves debido a las singulares condiciones que confluyen en este lugar, siendo además un refugio para especies en peligro de extinción como el lince ibérico y el águila imperial. El Parque de Doñana presenta un equilibrio extremadamente vulnerable con necesidades ambientales especiales, en el que la calidad de las aguas superficiales juega un papel muy importante. Diversos estudios han puesto de manifiesto la presencia de metales pesados en los principales aportes hídricos del Parque, sin embargo otros contaminantes no han recibido la atención pertinente. Los denominados contaminantes “emergentes” han suscitado un gran interés en el mundo científico en los últimos años. Entre ellos, los fármacos ocupan un lugar destacado ya que, aunque sus concentraciones en el medio ambiente son relativamente bajas (µg L-1 o ng L-1), en algunos casos son suficientes para provocar efectos adversos en los organismos. No obstante, a pesar de que su presencia en diversas matrices medioambientales (aguas residuales y superficiales y sedimentos) ha sido ampliamente descrita, hasta el momento no existe una legislación en la que se regule la descarga de estas sustancias al medioambiente. En este trabajo, se estudió la presencia de dieciséis fármacos en el agua residual efluente que afecta a los principales aportes hídricos de Doñana y en el agua superficial de esta área, así como el riesgo medioambiental asociado a la presencia de los fármacos. Los fármacos objeto de estudio fueron cinco antiinflamatorios (ácido salicílico, diclofenaco, ibuprofeno, ketoprofeno y naproxeno), dos antibióticos (sulfametoxazol y trimetroprim), un antiepiléptico (carbamacepina), un β-bloqueante (propanolol), un estimulante nervioso (cafeína), cuatro hormonas (17 α-etinilestradiol, 17 β-estradiol, estriol y estrona) y dos reguladores lipídicos (ácido clofíbrico y gemfibrozilo).Agencia Andaluza del Agua de la Consejería de Medio Ambiente de la Junta de AndalucíaMinisterio de Educación y Ciencia (España) Proyecto CGL2007-6228

    Good practices and universal accessibility to urban buses of children prams

    Full text link
    [ES] La presente publicación se realiza a partir de los resultados obtenidos en el proyecto de investigación ¿Determinación de los requisitos de accesibilidad y seguridad en la utilización de carritos de niños en vehículos de transporte público (ASUCAR)¿. Como objetivos particulares se pretendía analizar las condiciones de accesibilidad de los carritos de niños (CdN) en todas sus posibilidades, estudiar y definir las necesidades de utilización de sistemas de retención para los cochecitos y sus ocupantes, analizar la resistencia de los actuales modelos de carritos de niños, así como el desarrollo de un nuevo dispositivo de sistema de retención para los carritos de niños que pudiera utilizarse de la forma más universal en autobuses urbanos de transporte público. Los resultados se han concretado en la definición de un ¿Código de Buenas Prácticas para el Transporte de Carritos de Niños en Vehículos de Transporte Público¿, que podrá servir como base científica para el desarrollo de futuras normativas de seguridad relacionadas con este colectivo.[EN] Present work has been performed with the results achieved in the research project: ¿Determination of the accesibility and safety requirements of the use of prams and pushchairs in public transport (ASUCAR)¿. The specific objectives pretended were: the determination of the accessibility conditions of the children prams, the study and definition of the needs of use of restraint systems for these devices and their occupants, to analyze the strength of the prams structures, as well as, the development of a new restraint system for children prams that could be used in the most universal way in urban buses. The results were implemented in a good practice code that could be the basis for new regulation regarding the transport of children in buses.Alcala Facio, E.; Dols Ruiz, JF.; Martín, A.; Valles, B.; Aparicio Izquierdo, F.; Pons Sendra, V. (2011). Buenas prácticas y accesibilidad universal a los autobuses urbanos de carritos de niños. Securitas Vialis. 3(10):7-27. http://hdl.handle.net/10251/30878S72731

    La Cuevona de Avín (Avín, Asturias, North Spain): A new Late Pleistocene site in the lower valley of the River Güeña

    Get PDF
    The archaeological investigations carried out in the last twenty years in the Lower Valley of the River Güeña (Asturias, central part of northern Spain) have documented different prehistoric sites, particularly with Middle and Upper Palaeolithic occupations. This paper presents the first results of the archaeological excavation carried out in the cave of La Cuevona de Avín. From the systematic study of the biotic and abiotic remains, a total of three occupation phases (Phases 1 to 3) have been determined, dated in the Late Pleistocene. The lithic studies indicate the use of local raw materials (mainly quartzite), but also regional ones (different types of flint) in the whole sequence. Retouched implements are typologically representative only during the Upper Magdalenian (Phase II) and use-wear analysis indicates the manufacture and use of artefacts in situ during this phase. Archaeozoological studies reveal continuity in subsistence strategies throughout the sequence, noting specialization in red deer hunting during the Azilian (Phase I), and more diversified prey in the older phases of the sequence. © 2022 The Author(s

    The monoclonal antibody Ca37, developed against Candida albicans alcohol dehydrogenase, inhibits the yeast in vitro and in vivo

    Get PDF
    Candida albicans is a commensal yeast able to cause life threatening invasive infections particularly in immunocompromised patients. Despite the availability of antifungal treatments, mortality rates are still unacceptably high and drug resistance is increasing. We, therefore, generated the Ca37 monoclonal antibody against the C. albicans alcohol dehydrogenase (Adh) 1. Our data showed that Ca37 was able to detect C. albicans cells, and it bound to Adh1 in yeast and Adh2 in hyphae among the cell wall-associated proteins. Moreover, Ca37 was able to inhibit candidal growth following 18h incubation time and reduced the minimal inhibitory concentration of amphotericin B or fluconazole when used in combination with those antifungals. In addition, the antibody prolonged the survival of C. albicans infected-Galleria mellonella larvae, when C. albicans was exposed to antibody prior to inoculating G. mellonella or by direct application as a therapeutic agent on infected larvae. In conclusion, the Ca37 monoclonal antibody proved to be effective against C. albicans, both in vitro and in vivo, and to act together with antifungal drugs, suggesting Adh proteins could be interesting therapeutic targets against this pathogen.Technical and human support provided by the Proteomics Core Facility-SGIker at the UPV/EHU is gratefully acknowledged. We thank the member of the Chartered of Linguists, No 022913 for improving the English in the manuscript. This work was supported by Basque Government (Grant IT1362-19). AA, IB and LMS have received a predoctoral Grant from Basque Government and LAF from UPV/EH

    The VVV Templates Project. Towards an Automated Classification of VVV Light-Curves. I. Building a database of stellar variability in the near-infrared

    Full text link
    Context. The Vista Variables in the V\'ia L\'actea (VVV) ESO Public Survey is a variability survey of the Milky Way bulge and an adjacent section of the disk carried out from 2010 on ESO Visible and Infrared Survey Telescope for Astronomy (VISTA). VVV will eventually deliver a deep near-IR atlas with photometry and positions in five passbands (ZYJHK_S) and a catalogue of 1-10 million variable point sources - mostly unknown - which require classifications. Aims. The main goal of the VVV Templates Project, that we introduce in this work, is to develop and test the machine-learning algorithms for the automated classification of the VVV light-curves. As VVV is the first massive, multi-epoch survey of stellar variability in the near-infrared, the template light-curves that are required for training the classification algorithms are not available. In the first paper of the series we describe the construction of this comprehensive database of infrared stellar variability. Methods. First we performed a systematic search in the literature and public data archives, second, we coordinated a worldwide observational campaign, and third we exploited the VVV variability database itself on (optically) well-known stars to gather high-quality infrared light-curves of several hundreds of variable stars. Results. We have now collected a significant (and still increasing) number of infrared template light-curves. This database will be used as a training-set for the machine-learning algorithms that will automatically classify the light-curves produced by VVV. The results of such an automated classification will be covered in forthcoming papers of the series.Comment: 12 pages, 16 figures, 3 tables, accepted for publication in A&A. Most of the data are now accessible through http://www.vvvtemplates.org

    Low temperature plasma processing of platinum porphyrins for the development of metal nanostructured layers

    Get PDF
    This article establishes the bases for a vacuum and plasma supported methodology for the fabrication at mild temperatures of nanostructured platinum in the form of porous layers and nanocolumns using platinum octaethylporphyrin as precursor. In addition, the application of these materials as tunable optical filters and nano-counterelectrodes is proved. On one hand, the transparency in the ultraviolet-visible-near infrared range can be adjusted precisely between 70% and 1% by tuning the deposition and processing conditions, obtaining a high spectral planarity. Deviations of the spectra from an ideal flat filter are below 4%, paving the way to the fabrication of neutral density filters. The transparency limit values yield a sheet resistivity of ¿1350 and 120 ¿ ¿-1, respectively. On the other hand, the catalytic properties of the nanostructures are further demonstrated by their implementation as counterelectrodes of excitonic solar cells surpassing the performance of commercial platinum as counterelectrode in a 20% of the overall cell efficiency due to simultaneous enhancement of short-circuit photocurrent and open-circuit photovoltage. One of the most interesting features of the developed methodology is its straightforward application to other metal porphyrins and phthalocyanines readily sublimable under mild vacuum and temperature conditions.Junta de AndaluciaTEP8067 FQM-6900 FQM 1851 P12-FQM-2265España MinecoMAT2013-40852-R MAT2013-42900-P MAT2013-47192-C3-3-RMAT2016-79866-RMINECO-CSIC 201560E055
    corecore