768 research outputs found
Liquid Metering Centrifuge Sticks (LMCS): A Centrifugal Approach to Metering Known Sample Volumes for Colorimetric Solid Phase Extraction (C-SPE)
Phase separation is one of the most significant obstacles encountered during the development of analytical methods for water quality monitoring in spacecraft environments. Removing air bubbles from water samples prior to analysis is a routine task on earth; however, in the absence of gravity, this routine task becomes extremely difficult. This paper details the development and initial ground testing of liquid metering centrifuge sticks (LMCS), devices designed to collect and meter a known volume of bubble-free water in microgravity. The LMCS uses centrifugal force to eliminate entrapped air and reproducibly meter liquid sample volumes for analysis with Colorimetric Solid Phase Extraction (C-SPE). C-SPE is a sorption-spectrophotometric platform that is being developed as a potential spacecraft water quality monitoring system. C-SPE utilizes solid phase extraction membranes impregnated with analyte-specific colorimetric reagents to concentrate and complex target analytes in spacecraft water samples. The mass of analyte extracted from the water sample is determined using diffuse reflectance (DR) data collected from the membrane surface and an analyte-specific calibration curve. The analyte concentration can then be calculated from the mass of extracted analyte and the volume of the sample analyzed. Previous flight experiments conducted in microgravity conditions aboard the NASA KC-135 aircraft demonstrated that the inability to collect and meter a known volume of water using a syringe was a limiting factor in the accuracy of C-SPE measurements. Herein, results obtained from ground based C-SPE experiments using ionic silver as a test analyte and either the LMCS or syringes for sample metering are compared to evaluate the performance of the LMCS. These results indicate very good agreement between the two sample metering methods and clearly illustrate the potential of utilizing centrifugal forces to achieve phase separation and metering of water samples in microgravity
LinkHub: a Semantic Web system that facilitates cross-database queries and information retrieval in proteomics
<p>Abstract</p> <p>Background</p> <p>A key abstraction in representing proteomics knowledge is the notion of unique identifiers for individual entities (e.g. proteins) and the massive graph of relationships among them. These relationships are sometimes simple (e.g. synonyms) but are often more complex (e.g. one-to-many relationships in protein family membership).</p> <p>Results</p> <p>We have built a software system called LinkHub using Semantic Web RDF that manages the graph of identifier relationships and allows exploration with a variety of interfaces. For efficiency, we also provide relational-database access and translation between the relational and RDF versions. LinkHub is practically useful in creating small, local hubs on common topics and then connecting these to major portals in a federated architecture; we have used LinkHub to establish such a relationship between UniProt and the North East Structural Genomics Consortium. LinkHub also facilitates queries and access to information and documents related to identifiers spread across multiple databases, acting as "connecting glue" between different identifier spaces. We demonstrate this with example queries discovering "interologs" of yeast protein interactions in the worm and exploring the relationship between gene essentiality and pseudogene content. We also show how "protein family based" retrieval of documents can be achieved. LinkHub is available at hub.gersteinlab.org and hub.nesg.org with supplement, database models and full-source code.</p> <p>Conclusion</p> <p>LinkHub leverages Semantic Web standards-based integrated data to provide novel information retrieval to identifier-related documents through relational graph queries, simplifies and manages connections to major hubs such as UniProt, and provides useful interactive and query interfaces for exploring the integrated data.</p
Five decades of genome evolution in the globally distributed, extensively antibiotic-resistant Acinetobacter baumannii global clone 1.
The majority of Acinetobacter baumannii isolates that are multiply, extensively and pan-antibiotic resistant belong to two globally disseminated clones, GC1 and GC2, that were first noticed in the 1970s. Here, we investigated microevolution and phylodynamics within GC1 via analysis of 45 whole-genome sequences, including 23 sequenced for this study. The most recent common ancestor of GC1 arose around 1960 and later diverged into two phylogenetically distinct lineages. In the 1970s, the main lineage acquired the AbaR resistance island, conferring resistance to older antibiotics, via a horizontal gene transfer event. We estimate a mutation rate of ∼5 SNPs genome- 1 year- 1 and detected extensive recombination within GC1 genomes, introducing nucleotide diversity into the population at >20 times the substitution rate (the ratio of SNPs introduced by recombination compared with mutation was 22). The recombination events were non-randomly distributed in the genome and created significant diversity within loci encoding outer surface molecules (including the capsular polysaccharide, the outer core lipooligosaccharide and the outer membrane protein CarO), and spread antimicrobial resistance-conferring mutations affecting the gyrA and parC genes and insertion sequence insertions activating the ampC gene. Both GC1 lineages accumulated resistance to newer antibiotics through various genetic mechanisms, including the acquisition of plasmids and transposons or mutations in chromosomal genes. Our data show that GC1 has diversified into multiple successful extensively antibiotic-resistant subclones that differ in their surface structures. This has important implications for all avenues of control, including epidemiological tracking, antimicrobial therapy and vaccination
Bandage: interactive visualization of de novo genome assemblies.
UNLABELLED: Although de novo assembly graphs contain assembled contigs (nodes), the connections between those contigs (edges) are difficult for users to access. Bandage (a Bioinformatics Application for Navigating De novo Assembly Graphs Easily) is a tool for visualizing assembly graphs with connections. Users can zoom in to specific areas of the graph and interact with it by moving nodes, adding labels, changing colors and extracting sequences. BLAST searches can be performed within the Bandage graphical user interface and the hits are displayed as highlights in the graph. By displaying connections between contigs, Bandage presents new possibilities for analyzing de novo assemblies that are not possible through investigation of contigs alone. AVAILABILITY AND IMPLEMENTATION: Source code and binaries are freely available at https://github.com/rrwick/Bandage. Bandage is implemented in C++ and supported on Linux, OS X and Windows. A full feature list and screenshots are available at http://rrwick.github.io/Bandage. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online
Buckling Design and Imperfection Sensitivity of Sandwich Composite Launch-Vehicle Shell Structures
Composite materials are increasingly being considered and used for launch-vehicle structures. For shell structures, such as interstages, skirts, and shrouds, honeycomb-core sandwich composites are often selected for their structural efficiency. Therefore, it is becoming increasingly important to understand the structural response, including buckling, of sandwich composite shell structures. Additionally, small geometric imperfections can significantly influence the buckling response, including considerably reducing the buckling load, of shell structures. Thus, both the response of the theoretically perfect structure and the buckling imperfection sensitivity must be considered during the design of such structures. To address the latter, empirically derived design factors, called buckling knockdown factors (KDFs), were developed by NASA in the 1960s to account for this buckling imperfection sensitivity during design. However, most of the test-article designs used in the development of these recommendations are not relevant to modern launch-vehicle constructions and material systems, and in particular, no composite test articles were considered. Herein, a two-part study on composite sandwich shells to (1) examine the relationship between the buckling knockdown factor and the areal mass of optimized designs, and (2) to interrogate the imperfection sensitivity of those optimized designs is presented. Four structures from recent NASA launch-vehicle development activities are considered. First, designs optimized for both strength and stability were generated for each of these structures using design optimization software and a range of buckling knockdown factors; it was found that the designed areal masses varied by between 6.1% and 19.6% over knockdown factors ranging from 0.6 to 0.9. Next, the buckling imperfection sensitivity of the optimized designs is explored using nonlinear finite-element analysis and the as-measured shape of a large-scale composite cylindrical shell. When compared with the current buckling design recommendations, the results suggest that the current recommendations are overly conservative and that the development of new recommendations could reduce the acreage areal mass of many composite sandwich shell designs by between 4% and 19%, depending on the structure
Recommended from our members
Aligning Practice to Policies: Changing the Culture to Recognize and Reward Teaching at Research Universities
Recent calls for improvement in undergraduate education within STEM (science, technology, engineering, and mathematics) disciplines are hampered by the methods used to evaluate teaching effectiveness. Faculty members at research universities are commonly assessed and promoted mainly on the basis of research success. To improve the quality of undergraduate teaching across all disciplines, not only STEM fields, requires creating an environment wherein continuous improvement of teaching is valued, assessed, and rewarded at various stages of a faculty member’s career. This requires consistent application of policies that reflect well-established best practices for evaluating teaching at the department, college, and university levels. Evidence shows most teaching evaluation practices do not reflect stated policies, even when the policies specifically espouse teaching as a value. Thus, alignment of practice to policy is a major barrier to establishing a culture in which teaching is valued. Situated in the context of current national efforts to improve undergraduate STEM education, including the Association of American Universities Undergraduate STEM Education Initiative, this essay discusses four guiding principles for aligning practice with stated priorities in formal policies: 1) enhancing the role of deans and chairs; 2) effectively using the hiring process; 3) improving communication; and 4) improving the understanding of teaching as a scholarly activity. In addition, three specific examples of efforts to improve the practice of evaluating teaching are presented as examples: 1) Three Bucket Model of merit review at the University of California, Irvine; (2) Evaluation of Teaching Rubric, University of Kansas; and (3) Teaching Quality Framework, University of Colorado, Boulder. These examples provide flexible criteria to holistically evaluate and improve the quality of teaching across the diverse institutions comprising modern higher education
SRST2: Rapid genomic surveillance for public health and hospital microbiology labs.
Rapid molecular typing of bacterial pathogens is critical for public health epidemiology, surveillance and infection control, yet routine use of whole genome sequencing (WGS) for these purposes poses significant challenges. Here we present SRST2, a read mapping-based tool for fast and accurate detection of genes, alleles and multi-locus sequence types (MLST) from WGS data. Using >900 genomes from common pathogens, we show SRST2 is highly accurate and outperforms assembly-based methods in terms of both gene detection and allele assignment. We include validation of SRST2 within a public health laboratory, and demonstrate its use for microbial genome surveillance in the hospital setting. In the face of rising threats of antimicrobial resistance and emerging virulence among bacterial pathogens, SRST2 represents a powerful tool for rapidly extracting clinically useful information from raw WGS data. Source code is available from http://katholt.github.io/srst2/
Functional MRI in Awake Unrestrained Dogs
Because of dogs' prolonged evolution with humans, many of the canine cognitive skills are thought to represent a selection of traits that make dogs particularly sensitive to human cues. But how does the dog mind actually work? To develop a methodology to answer this question, we trained two dogs to remain motionless for the duration required to collect quality fMRI images by using positive reinforcement without sedation or physical restraints. The task was designed to determine which brain circuits differentially respond to human hand signals denoting the presence or absence of a food reward. Head motion within trials was less than 1 mm. Consistent with prior reinforcement learning literature, we observed caudate activation in both dogs in response to the hand signal denoting reward versus no-reward
- …