Efficient removal of methylene blue from colored wastewater using magnetite/carbon nanocomposite

In this work, a new nanocomposite based on activated carbon and magnetite (PM) was synthesized and characterized by the most indicated and modern methods. The obtained magnetite/carbon nanocomposite was tested as adsorbent for the removal of Methylene Blue (MB) from colored wastewater. In ortder to elucidate the adsorption mechanism, kinetic and thermodynamic studies were carried out. The high adsorption capacity of the synthesized nanocomposite was highlighted by regeneration and reuse studies in consecutive adsorption/desorption cycles

Multicentric Atrial Strain COmparison between Two Different Modalities: MASCOT HIT Study

Two methods are currently available for left atrial (LA) strain measurement by speckle tracking echocardiography, with two different reference timings for starting the analysis: QRS (QRS-LASr) and P wave (P-LASr). The aim of MASCOT HIT study was to define which of the two was more reproducible, more feasible, and less time consuming. In 26 expert centers, LA strain was analyzed by two different echocardiographers (young vs senior) in a blinded fashion. The study population included: healthy subjects, patients with arterial hypertension or aortic stenosis (LA pressure overload, group 2) and patients with mitral regurgitation or heart failure (LA volume–pressure overload, group 3). Difference between the inter-correlation coefficient (ICC) by the two echocardiographers using the two techniques, feasibility and analysis time of both methods were analyzed. A total of 938 subjects were included: 309 controls, 333 patients in group 2, and 296 patients in group 3. The ICC was comparable between QRS-LASr (0.93) and P-LASr (0.90). The young echocardiographers calculated QRS-LASr in 90% of cases, the expert ones in 95%. The feasibility of P-LASr was 85% by young echocardiographers and 88% by senior ones. QRS-LASr young median time was 110 s (interquartile range, IR, 78-149) vs senior 110 s (IR 78-155); for P-LASr, 120 s (IR 80-165) and 120 s (IR 90-161), respectively. LA strain was feasible in the majority of patients with similar reproducibility for both methods. QRS complex guaranteed a slightly higher feasibility and a lower time wasting compared to the use of P wave as the reference

Dyes and Heavy Metals Removal from Aqueous Solutions Using Raw and Modified Diatomite

The progress of the textile industry has led to a severe increase in the discharge of colored effluents, polluted with dyes and metal ions (non-biodegradable, carcinogenic to humans and environmental hazards). The implementation of effective methodologies and materials for the treatment of wastewater has become an urgent requirement. The present work describes the application of two samples of mineral materials—Ghidirim diatomite and modified diatomite—as adsorbents for the removal of dyes—Acid Blue 350, Methylene Blue, Basic Red 2—and of metal ions—copper, zinc, and lead—from aqueous solutions. In order to determine the optimal working conditions by which to ensure maximum removal efficiency, the influence of the nature and amount of the sorbent, the initial concentration of pollutant, and the temperature were studied. Working under normal conditions (room temperature, solution pH) efficiencies greater than 80% were obtained for the removal of dyes and metal ions. The adsorption fitted well with the pseudo-second order kinetic model, and the maximum adsorption capacities were determined from the Langmuir isotherm model. The adsorption of investigated pollutants is an endothermic and spontaneous process. The results indicate that Ghidirim diatomite and modified diatomite have potential applications in water purification management, providing high removal efficiency of both dyes and metal ions

Adsorption of Anionic Dyes from Wastewater onto Magnetic Nanocomposite Powders Synthesized by Combustion Method

In the present study, new magnetic nanocomposites were successfully prepared by combustion method, characterized by X-ray diffraction, Fourier transform infrared spectroscopy, magnetic measurements, N2 adsorption–desorption thermal analysis, and scanning electron microscopy, and tested as adsorbents for the removal of anionic dyes (Acid Yellow 42 and Acid Red 213) from aqueous solutions. The influence of process variables solution pH, adsorbent dose, initial dye concentration and temperature on the adsorption was evaluated. The best kinetic model that fitted with experimental data was a pseudo-second order model, and the equilibrium data were correlated by Langmuir isotherm model for the investigated dyes. Maximum removal efficiencies of 98.54% and 97.58% was obtained for Acid Yellow 42 and Acid Red 213, respectively, indicating the superior adsorption capacity of the new synthesized magnetic nanocomposites. The thermodynamic parameters indicated the spontaneous and endothermic nature of the adsorption process

Removal of Colored Organic Pollutants from Wastewaters by Magnetite/Carbon Nanocomposites: Single and Binary Systems

This work develops a methodology for selective removal of industrial dyes from wastewaters using adsorption technology based on magnetic adsorbents. The magnetic nanoparticles embedded within a matrix of activated carbon were tested as adsorbents for removal of industrial dyes from aqueous solutions. The effects of four independent variables, solution pH, initial concentration of pollutant, adsorbent dose, contact time, and their interactions on the adsorption capacity of the nanocomposite were investigated in order to optimize the process. The removal efficiency of pollutants depends on solution pH and increases with increasing the carbon content, with initial concentration of the pollutants, the temperature, and the dose of magnetite/carbon nanocomposites. Pseudo-second-order kinetic model was fitted to the kinetic data, and adsorption isotherm analysis and thermodynamics were used to elucidate the adsorption mechanism. The maximum adsorption capacities were 223.82 mg g−1 for Nylosan Blue, 114.68 mg g−1 for Chromazurol S, and 286.91 mg g−1 for Basic Red 2. The regeneration and reuse of the sorbent were evaluated in seven adsorption/desorption cycles. The optimum conditions obtained for individual adsorption were selected as starting conditions for simultaneous adsorption of dyes. In binary systems, in normal conditions, selectivity decreases in the order: Red Basic 2 > Nylosan Blue > Chromazurol S