Intra-Domain Pathlet Routing

Internal routing inside an ISP network is the foundation for lots of services that generate revenue from the ISP's customers. A fine-grained control of paths taken by network traffic once it enters the ISP's network is therefore a crucial means to achieve a top-quality offer and, equally important, to enforce SLAs. Many widespread network technologies and approaches (most notably, MPLS) offer limited (e.g., with RSVP-TE), tricky (e.g., with OSPF metrics), or no control on internal routing paths. On the other hand, recent advances in the research community are a good starting point to address this shortcoming, but miss elements that would enable their applicability in an ISP's network. We extend pathlet routing by introducing a new control plane for internal routing that has the following qualities: it is designed to operate in the internal network of an ISP; it enables fine-grained management of network paths with suitable configuration primitives; it is scalable because routing changes are only propagated to the network portion that is affected by the changes; it supports independent configuration of specific network portions without the need to know the configuration of the whole network; it is robust thanks to the adoption of multipath routing; it supports the enforcement of QoS levels; it is independent of the specific data plane used in the ISP's network; it can be incrementally deployed and it can nicely coexist with other control planes. Besides formally introducing the algorithms and messages of our control plane, we propose an experimental validation in the simulation framework OMNeT++ that we use to assess the effectiveness and scalability of our approach.Comment: 13 figures, 1 tabl

Design of a blow off valve for turbocharged engine applications

On a turbo engine, the Blow of Valve (BOV) is used to relieve the pressure from the turbo output when the throttle is closed. Without the BO y, when the throttle is closed the turbo is suddenly trying to pump air against a closed throttle plate. This creates pressure spike in the turbo output hose and will send back the pressure to the turbine and can damage the turbo engine. When the throttle is opened again, the turbo has to spin up again, creating turbo lag. So, the present of the BOY will opened when the throttle is closed and pressurized the pressure spike to the air to avoid those phenomena. So, good flow of the air inside the BOV is important, the air will smoothly pressurized to the atmosphere if there is no back pressure inside the system. Computer aided design (CAD) and computational fluid dynamic (CFD) software were used as a tool for the design. This design is the improvement of the aftermarket design. The piston surface, size of vent, inlet ports, outlet ports, and also spring plays the role in the BOy. The design analyzed using CFD so can see the flow trajectories of the air inside the BOy

Microleakage in Class II composite restorations with margins below the CEJ: in vitro evaluation of different restorative techniques

Objectives: The purpose of this in vitro study was to evaluate the microleakage in "deep" Class II composite restorations with gingival cavosurface margin below the CEJ (cemento-enamel junction) and restored with different techniques. Study Design: Fifty human teeth were used. In each tooth two standardized Class II slot cavities (on mesial and on distal surfaces) were prepared: the buccolingual extension of the cavities was 4 mm; the gingival wall was located in dentin/cementum (2 mm beyond the CEJ). The prepared teeth were randomly assigned to 5 experimental groups (of 10 specimens and 20 cavities each) and restored. Group 1: Filtek TM Supreme XTE Flowable (3MESPE) + Universal Filtek Supreme XTE (3MESPE), Group 2: GrandioSO Heavy Flow (Voco) + GrandioSo (Voco), Group 3: SDRTm (Dentsply Caulk) + Esthet-X® HD (Dentsply Caulk), Group 4: SonicFill (Kerr), Group 5: Grandio (Voco). After thermocycling, the specimens were immersed in a 0.5% basic fuchsine dye solution and incubated at 37°C for 24 hours. The teeth were subsequently sectioned mesiodistally. All specimens were examined at 25× in a stereomicroscope and standardized digital images were obtained. Dye penetration was measured from gingival margins. Results: The results demonstrated no significant leakage differences between Group 4 and Group 5, that both showed significantly higher frequency distribution of Score 0. Group 2 and Group 3 showed a significant prevalence of Score 1, whereas Group 1 showed significantly higher frequency of Score 2. Conclusions: None of the restorative techniques tested completely eliminated microleakage dye penetration in dentin margins; marginal adaptation in Class II composite restorations with gingival wall below the CEJ varied in both substrates and from different restorative techniques used

Effect of glycine pretreatment on the shear bond strength of a CAD/CAM resin nano ceramic material to dentin

Background: The purpose of this study was to evaluate the effect of glycine pretreatment on the shear bond strength between dentin and a CAD/CAM resin nano ceramic material (LavaTM Ultimate Restorative), bonded together with adhesive cements using three different luting protocols (total-etch; self-etch; self-adhesive). Material and Methods: Thirty cylinders were milled from resin nano ceramic blocks with CAD/CAM technology. The cylinders were subsequently cemented to the exposed dentin of 30 bovine permanent mandibular incisors. The specimens were assigned into six groups of five teeth each according to luting procedure and dentin pretreatment. In the first two groups (A1, A2) 10 cylinders were cemented using a total-etch protocol; in groups B1 and B2, 10 cylinders were cemented using a self-etch protocol; in groups C1 and C2, 10 cylinders were cemented using a self-adhesive protocol; in groups A1, B1 and C1 the dentinal surface was also treated with glycine powder. All cemented specimens were submitted to a shear bond strength test. Statistical analysis was performed with Stata 9.0 software. Results: ANOVA showed the presence of significant differences among the various groups ( P <0.0001). Conclusions: Glycine did not change the different bond strength demonstrated by the various luting protocols tested. Conventional resin composite cements used together with a self-etch adhesive reported the highest values. However the use of glycine seems to increase the bond strength of self-adhesive resin cements

INCREASING THE VALUE OF THE TYPICAL WINE PRODUCTION IN NATIONAL TERRITORY: A PILOT PROJECT IN THE PROVINCE OF BERGAMO

Le caratteristiche di un vino dipendono dalla cantina, dai vitigni utilizzati per la produzione delle uve, e dal terroir: quella combinazione magica di geologia, morfologia, clima, coltura e cultura che caratterizza l’ambiente dove il vino nasce. Un sistema informativo geografi co è uno strumento potentissimo al servizio della qualificazione del terroir perché aiuta gli esperti nell’elaborazione dei dati e nella loro analisi. La tecnologia WebGIS si rivela essere un valido strumento di ausilio per l’analisi e la valorizzazione del territorio. Attraverso l’uso di queste soluzioni tecnologicamente avanzate, WineGIS fornisce in maniera integrata strumenti di carattere tecnico e scientifico, in grado di rappresentare in modo unitario la complessa e ricca realtà delle zone di produzione tipiche dei vini italiani. E di rappresentare un punto di partenza per una moderna politica di valorizzazione del territorio.The characteristics of a wine depend on the cellar, the grapevines used in the production of the grapes and the terroir: that magical combination of geology, landscape, climate culture that characterize the environment in which the wine is born. GIS is a powerful instrument in providing accurate terroir information because it helps experts in the elaboration of data and their research. Web GIS technology is a powerful tool to support landscape analysis and promotion. Through the use of these technologically advanced solutions, WineGIS offers, in an integrated manner, scientific and technical instruments able to represent in a unified way, a complex and rich view of areas of production typical to the Italian wine industry. And to represent a starting point for a modern political evaluation of the zone

Biological and antibacterial properties of a new silver fiber post : in vitro evaluation

The incorporation of nano silver particles (AgNPs) to improve antibacterial properties of dental materials has become increasingly common. The aim of the present study was to compare the antibacterial activity and cytotoxicity effects of different fiber posts: glass fiber post, quartz fiber post, nano fiber post and silver fiber post. The antibacterial activity against S. mutans, S. salivarius and S. sanguis was evaluated by using the agar disc diffusion test (ADT). Four wells of 3x2 mm (one for each material) were made with a punch by removing the agar and filled with the materials to be evaluated. The size of the inhibition zone was calculated. An extract was made eluting the posts in cell culture medium using the surface area-to-volume ratio of approximately 1.25cm²/ml between the surface of the samples and the volume of medium. Cell cultures were then exposed to 100 ?L of the extracts medium. After 24 h, cell viability was determined using the MTT assay. Silver fiber post was the only material showing a fair antibacterial effect against all the three streptococcal strains. The level of cytotoxicity of all the fiber posts tested was higher than 90% and therefore they were considered not cytotoxic. The new silver fiber post reported a fair antibacterial activity. On the other hand all the fiber posts tested (including the post with incorporated AgNPs) proved to be biocompatible, suggesting that their application does not represent a threat to human health

The impact of nonalcoholic fatty liver disease on renal function in children with overweight/obesity

The association between nonalcoholic fatty liver disease (NAFLD) and chronic kidney disease has attracted interest and attention over recent years. However, no data are available in children. We determined whether children with NAFLD show signs of renal functional alterations, as determined by estimated glomerular filtration rate (eGFR) and urinary albumin excretion. We studied 596 children with overweight/obesity, 268 with NAFLD (hepatic fat fraction &gt;= 5% on magnetic resonance imaging) and 328 without NAFLD, and 130 healthy normal-weight controls. Decreased GFR was defined as eGFR &lt; 90 mL/min/1.73 m(2). Abnormal albuminuria was defined as urinary excretion of &gt;= 30 mg/24 h of albumin. A greater prevalence of eGFR &lt; 90 mL/min/1.73 m2 was observed in patients with NAFLD compared to those without liver involvement and healthy subjects (17.5% vs. 6.7% vs. 0.77%; p &lt; 0.0001). The proportion of children with abnormal albuminuria was also higher in the NAFLD group compared to those without NAFLD, and controls (9.3% vs. 4.0% vs. 0; p &lt; 0.0001). Multivariate logistic regression analysis revealed that NAFLD was associated with decreased eGFR and/or microalbuminuria (odds ratio, 2.54 (confidence interval, 1.16-5.57); p &lt; 0.05) independently of anthropometric and clinical variables. Children with NAFLD are at risk for early renal dysfunction. Recognition of this abnormality in the young may help to prevent the ongoing development of the disease

Comparative cytotoxicity evaluation of eight root canal sealers

The aim of the present study is to evaluate and compare the cytotoxic effects of eight root canal sealers (BioRoot RCS, TotalFill BC Sealer, MTA Fillapex, Sealapex, AH Plus, EasySeal, Pulp Canal Sealer, N2) on immortalized human gingival fibroblasts over a period of 24, 48 and 72 hours. Immortalized human gingival fibroblast-1 HGF-1 (ATCC CRL-2014) were incubated. Root canal sealers were then placed into sterile, cylindrical Teflon moulds. The extraction was made eluting the sealers in cell culture medium. Cells (1 × 104) were seeded in each well of a 96-well plate and incubated for 24 h at 37°C. Cultures were then exposed to 100 ?L of the extracts medium. The percentage of viable cells in each well was calculated relative to control cells set to 100%. BioRoot RCS and TotalFill BC Sealer extracted for 24h showed no cytotoxic effect, while it was mild by using 48 and 72 h extracts. No cytotoxic effect was measured by using AH Plus medium eluted for 24 h, while it was moderate after 48 h and severe after 72 h. Pulp Canal Sealer, Sealapex and N2 showed moderately cytotoxic activity for all the extraction times. EasySeal and MTA Fillapex remained severely or borderline mildly cytotoxic for all the extraction times. In the present study only BioRoot RCS, TotalFill BC Sealer and AH Plus showed no cytotoxic effects at least in the first 24h. All the other sealers revealed moderately or severely cytotoxic activity during all the extraction times

In vitro antibacterial activity of different pulp capping materials

Background: Direct pulp capping involves the application of a dental material to seal communications between the exposed pulp and the oral cavity (mechanical and carious pulp exposures) in an attempt to act as a barrier, protect the dental pulp complex and preserve its vitality. The aim of this study was to evaluate and compare, by the agar disc diffusion test, the antimicrobial activity of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), Biodentine (Septodont). Material and Methods: Streptococcus salivarius , Streptococcus sanguis and Streptococcus mutans strains were selected to evaluate the antimicrobial activity by the agar disc diffusion test of different pulp capping materials. Paper disks were impregnated whit each pulp capping materials and placed onto culture agar-plates pre-adsorbed with bacterial cells and further incubated for 24 h at 37°C. The growth inhibition zones around each pulp capping materials were recorded and compared for each bacterial strain. Results: For the investigation of the antibacterial properties the ANOVA showed the presence of significant differences among the various materials. Tukey test showed that MTA-based materials induced lower growth inhibition zones. Conclusions: MTA-based products show a discrete antibacterial activity varying from calcium hydroxide-based materials which present an higher antibacterial activity