Solid dispersions with hydrogenated castor oil increase solubility, dissolution rate and intestinal absorption of praziquantel

The solubility behavior of drugs remains one of the most challenging aspects in formulation development. Solid Dispersion (SD) has tremendous potential for improving drug solubility. Although praziquantel (PZQ) is the first drug of choice in the treatment of schistosomiasis, its poor solubility has restricted its delivery oral route. In spite of its poor solubility, PZQ is well absorbed in the gastrointestinal tract, but large doses are required to achieve adequate concentration at the target sites. The aim of this study was to improve the solubility and dissolution rate of PZQ and to evaluate its intestinal absorption. SDs were formulated with PEG-60 castor oil hydrogenated (CR-60) using a fusion and evaporation method. Pure PZQ and physical mixtures (PM) and PZQ-CR-60 (2:1; 1:1; 1:2 ratios) were compared as regards their solubility, dissolution and intestinal absorption. The experimental results demonstrated the improvement in the solubility, dissolution rate and intestinal absorption. In addition, the solubility behavior showed pH dependency and that the solubility of PZQ was slower in acidic medium than in neutral and basic mediums. The increase in PZQ solubility of the SD with the CR-60 could be attributed to several factors such as improved wettability, local solubilization, drug particle size reduction and crystalline or, interstitial solid solution reduction.A solubilidade de fármacos ainda é um dos principais desafios no desenvolvimento de formulações farmacêuticas. As dispersões sólidas (DS) apresentam grande potencial para melhorar a solubilidade de fármacos. O praziquantel é o fármaco de primeira escolha no tratamento da esquistossomose, contudo a baixa solubilidade em água restringe seu uso à administração pela via oral. Apesar da baixa solubilidade, o PZQ é bem absorvido através do trato gastrintestinal, mas doses orais elevadas são requeridas para garantir concentrações suficientes de fármaco para o tecido alvo. O objetivo deste estudo foi melhorar a solubilidade, a dissolução e avaliar a absorção do PZQ. As DS foram formuladas com óleo de castor hidrogenado - PEG 60 (CR-60), pelo uso dos métodos de fusão e evaporação do solvente. PZQ puro, mistura física (MF) e DS de CR-60-PZQ (1:2; 1:1; 2:1) foram comparados quanto à solubilidade, dissolução e absorção intestinal. Os resultados experimentais mostraram aumento na solubilidade, na taxa de dissolução e na absorção intestinal do PZQ nas DS. A solubilidade do PZQ foi maior em meio ácido, mostrando uma dependência do pH. O aumento na solubilidade do PZQ nas DS com CR-60 foi atribuída a fatores como aumento da molhabilidade, solubilização local, redução granulométrica e redução da cristalinidade ou, ainda, a ocorrência de uma solução sólida intersticial.(CNPq) National Council of Scientific and Technological Development(FAPESP) São Paulo Research Foundatio

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part I: experimental factorial design

Lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water enclose, at least in theory, a biomimetic aqueous-core suitable for housing hydrophilic biomolecules such as proteins, peptides and bacteriophage particles. The research effort entertained in this paper reports a full statistical 23x31 factorial design study (three variables at two levels and one variable at three levels) to optimize biomimetic aqueous-core lipid nanoballoons for housing hydrophilic protein entities. The concentrations of protein, lipophilic and hydrophilic emulsifiers, and homogenization speed were set as the four independent variables, whereas the mean particle hydrodynamic size (HS), zeta potential (ZP) and polydispersity index (PI) were set as the dependent variables. The V23x31 factorial design constructed led to optimization of the higher (+1) and lower (-1) levels, with triplicate testing for the central (0) level, thus producing thirty three experiments and leading to selection of the optimized processing parameters as 0.015% (w/w) protein entity, 0.75% (w/w) lipophilic emulsifier (soybean lecithin) and 0.50% (w/w) hydrophilic emulsifier (poloxamer 188). In the present research effort, statistical optimization and production of protein derivatives encompassing full stabilization of their three-dimensional structure, has been attempted via housing said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion

Characterization of a water-in-oil-in-water multiple emulsion integrating biomimetic aqueous-core lipid nanoballoons housing protein entities

Project funding by Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, São Paulo, Brazil) ( FAP ESP Ref. No. 2013/03181 - 6, Project PneumoPhageKill

Chitosan-based scaffolds for tissue regeneration: preparation and microstructure characterization

Scaffolds are porous three-dimensional supports, designed to mimic the extracellular environment and remain temporarily integrated into the host tissue while stimulating, at the molecular level, specific cellular responses to each type of body tissues. The major goal of the research work entertained herein was to study the microstructure of scaffolds made from chitosan (Ch), blends of chitosan and sodium alginate (Ch/NaAlg), blends of chitosan, sodium alginate and calcium chloride (Ch/NaAlg/CaCl2) and blends of chitosan, sodium alginate and hydroxyapatite (Ch/NaAlg/HA). Scaffolds possessing ideal physicochemical properties facilitate cell proliferation and greatly increase the rate of recovery of a damaged organ tissue. Using CT three-dimensional images of the scaffolds, it was observed that all scaffolds had a porosity in the range 64%-92%, a radius of maximum pore occurrence in the range 95m-260m and a permeability in the range 1×10-10-18×10-10 m2. From the results obtained, the scaffolds based on Ch, Ch/NaAlg and Ch/NaAlg/CaCl2 would be most appropriate both for the growth of osteoid and for bone tissue regeneration, while the scaffold made with a blend of Ch/NaAlg/HA, by possessing larger pores size, might be used as a support for fibrovascular tissue.Project funding by Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, São Paulo, Brazil) (FAPESP Refs. No. 2012/21219-5, 2012/15651-4, 2013/03181-6, 2013/19300-4, and 2014/21122-0), is hereby gratefully acknowledged. This work received support from CNPq, National Council for Scientific and Technological Development – Brazil, in the form of Research Productivity (PQ) fellowships granted to Victor M. Balcão and Marco V. Chaud

Development and characterization of a hydrogel containing nitrofurazone for antimicrobial topical applications

The goal of the research work entertained herein was the development and characterization of a poly-(vinyl alcohol) (PVA) hydrogel cross-linked with glutaraldehyde and impregnated with 0.2% (w/w) nitrofurazone (NTZ), for topical applications. To verify the active principle release capability, one has determined (i) swelling profile, (ii) in vitro release of NTZ via UV-VIS spectrophotometry, and (iii) antimicrobial activity via exposure to the hydrogel of ATCC strains of Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa. The optimized hydrogel was further characterized via scanning electron microscopy (SEM), infrared spectroscopy with Fourier transform, moisture content determinations and thermal analyses via thermal gravimetry (TGA). Swelling tests revealed a mass increase from 100±5% up to 350±11%. Incorporated NTZ displayed bactericidal activity, as expected, being released in a linearly controlled fashion above 6 μg/mL during experiment timeframes of 14 h. SEM analyses allowed verification of a homogeneous surface morphology, while infrared spectra showed that NTZ did not bind strongly to the cross-linked polymer. Furthermore, results from thermal analyses suggested a loss of thermal stability arising from incorporation of NTZ in the hydrogel. The optimized hydrogel exhibited characteristics with high potential for (antimicrobial) treatment of skin lesions.Financial support to Victor M. Balcao, via an Invited Research Scientist fellowship (FAPESP Ref. No. 2011/51077-8) by Fundacao de Amparo a Pesquisa do Estado de Sao Paulo (FAPESP, Sao Paulo, Brazil), is hereby gratefully acknowledged. Sebastiao Coelho de Lima gratefully acknowledges financial support from the Centro Universitario da Barra Mansa (Rio de Janeiro/RJ, Brazil)

Development and characterization of a gel formulation integrating microencapsulated nitrofurazone

Nitrofurazone (NTZ) is usually employed in the topical treatment of infected wounds and lesions of both skin and mucosa. Microencapsulation is a process utilized in the incorporation of active ingredients within polymers aiming at, among other objectives, the prolonged release of pharmaceutical compounds and protection from atmospheric agents (viz. moisture, light, heat and/or oxidation). With the goal of utilizing the microparticles containing encapsulated NTZ in pharmaceutical formulations, one prepared microparticles containing NTZ via ionotropic gelation of sodium alginate. The microparticles were characterized via scanning electron microscopy analyses, Fourier transform infrared spectroscopy (FTIR) analyses, via determination of encapsulation efficiency, and via thermal analyses (both TGA and DSC). The final gel formulation was also characterized rheologically. The extrusion/solidification technique employed to obtain the calcium alginate microparticles with encapsulated NTZ was found to be adequate, and produced an NTZ encapsulation efficiency of ca. 97.8% ± 1.1%. The calcium alginate microparticles thus obtained, with encapsulated NTZ, exhibited an oval shape and hydrodynamic diameters between 500 μm and 800 μm. From the thermal analyses performed, together with information from the infrared spectra, one may conclude that NTZ did not strongly bind to the polymer, which may be favorable for the release of the active ingredient. From the results obtained in the present research effort, one may conclude that the microparticles produced possess the potential to be utilized as carriers for NTZ in pharmaceutical formulations such as gels, ointments, and solutions.Financial support to Victor M. Balcao, via an Invited Research Scientist fellowship (FAPESP Ref. No. 2011/51077-8) by Fundacao de Amparo a Pesquisa do Estado de Sao Paulo (FAPESP, Sao Paulo, Brazil), is hereby gratefully acknowledged

Supercritical fluid and pharmaceutical applications. Part I: Process classification

The supercritical fluid technology has been target of many pharmaceuticals investigations in particles production for almost 35 years. This is due to the great advantages it offers over others technologies currently used for the same purpose. A brief history is presented, as well the classification of supercritical technology based on the role that the supercritical fluid (carbon dioxide) performs in the process.FAPESP (São Paulo, Brazil – project 2012/01333-0) for financial suppor

Study of the elemental composition of saliva of smokers and nonsmokers by X-ray fluorescence

"Available online 09 September 2016"Cigarette smoking is a serious public health problem. According to data from the World Health Organization, it is estimated that currently more than 1.2 billion people worldwide do tobacco use and that smoking-related diseases are responsible for about 6 million deaths each. With attention to this, it is necessary to seek preventive and prognostic of trying to reduce these numbers and alert the public in general about the danger and the harm caused by its use. Thus, the objective of the research work undertaken was to evaluate and compare the chemical composition of collected saliva samples of smokers and nonsmokers by X-ray Fluorescence analyses. 32 individuals were selected, 16 of which used cigarette on a daily basis and the other 16 had never smoked. Saliva was collected with the help of a (sterile) disposable Pasteur pipette and samples sent to the Applied Nuclear Physics Laboratory at UNISO (LAFINAU), where analyzes were carried out. Individuals who agreed to participate in the study answered a questionnaire to define their profile of inclusion and signed an informed consent form (CEP Protocol n° 831.753 of 09/10/2014). The results clearly showed that there are differences in the concentrations of chemical elements in the saliva of smokers and non-smokers. The biggest discrepancies were found at concentrations of the chemical elements Sulfur, Phosphorus, Chlorine and Potassium, and smaller differences in the concentration of the elements Calcium, Manganese, Iron, Copper, Titanium, Vanadium and Nickel. In only one saliva sample, and in quite low amounts, arsenic was detected. The results indicate that smoking produces more significant changes in the saliva of women than in men, increasing the concentration of some elements in the saliva of female smokers, much more than in the male smokers. The cigarette usage time also appears to exert a greater influence on the composition of the saliva of women than in men, indicating that the damage caused by cigarette use may in fact be higher in women than in men.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, São Paulo, Brazil) (FAPESP Refs. no. 2012/ 15651-4 and 2013/03181-6)CNPq, National Council for Scientific and Technological Development – Brazil, in the form of Research Productivity (PQ) fellowships - Ref. no. 306113/2014-7, Ref. No. 309598/2014-

Zidovudine-poly(l-lactic acid) solid dispersions with improved intestinal permeability prepared by supercritical antisolvent process

A supercritical antisolvent (SAS) process for obtaining zidovudine-poly(l-lactic acid) (PLLA) solid dispersions (SDs) was used to attain a better intestinal permeation of this drug. A 32 factorial design was used, having as independent variables the ratio 3-azido-23-dideoxythymidine (AZT)PLLA and temperature/pressure conditions, as dependent variables the process yield and particle macroscopic morphology. AZTPLLA production batches were carried out by the SAS process, and the resulting products evaluated via scanning electron microscope, X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared analyses. From the nine possible combinations of tests performed experimentally, only one combination did not produced a solid. The L3 batch of SD, produced with 1:2 (AZTPLLA) ratio, resulted in a 91.54% yield, with 40% AZT content. Intestinal permeability studies using the AZTPLLA from L3 batch led to an AZT permeability of approximately 9.87%, which was higher than that of pure AZT (3.84%). AZT remained in crystalline form, whereas PLLA remained in semicrystalline form. AZT release is controlled by a diffusion mechanism. It has been demonstrated that it is possible to use PLLA carrier and SAS process to obtain SD, in a single step.Cristalia (Itapira, Brazil) for the kind supply of the reference substance used throughout the research work. Financial support from Fundação de Amparo á Pesquisa do Estado de São Paulo (2013-19300-4; 2012/01333-0; 2011/21219-5), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (PROSUP/CAPES) and Finep Inovação e Pesquisa (Finep, Brazil; 01.13.0286.00)

A novel gastroretentive floating system for zidovudine, based on calcium-silicate beads

The aim of the research effort entertained herein was to develop, evaluate and fully characterize a multiparticulate floating gastroretentive system for the modified release of zidovudine (AZT), an antiretroviral drug. AZT was used as a water-soluble model drug at therapeutic doses. The floating gastroretentive system was obtained via polymer coating of calcium silicate-adsorbed AZT. The proposed system was evaluated in vitro for particle micromorphology, lag time for floating and duration of floating, drug loading capacity, drug release profile, and drug release kinetics. The physicochemical properties of AZT were evaluated by scanning electron microscopy (SEM) analyses, differential scanning calorimetry (DSC) analyses, X-ray diffraction (XRD) analyses, and infrared spectroscopy (FTIR) analyses. Results from SEM analysis of the AZT-containing floating gastroretentive granules allowed observation of an irregular surface and the apparent absence of pores. Floating of the AZT-containing gastroretentive granules was immediately achieved, that is lag time for floating was virtually zero and duration of floating was higher than 12 h. The drug loading capacity of the floating gastroretentive granules was ca. 81.09 ± 14.66%, and the release system thus obtained exhibited an extended drug release profile. Results from DSC and XRD analyses showed a modification in the AZT solid state, while the FTIR spectroscopy analyses revealed that the chemical structure of AZT remained unchanged upon adsorption to calcium silicate followed by polymeric coating. Hence, the coated granules produced presented gastroretentive, floating, and extended drug release properties.Research Scientist fellowship ( FAPESP Ref. No. 2011/51077 - 8 ) is hereby gratefully acknowledged. The authors also wish to thank Nortec Química (Rio de Janeiro RJ, Brazil) for providing the reference materials, and Almapal (São Paulo SP, Brazil) and Cristalia Laboratories (Itapira SP, Brazil) for providing the samples. SAU - FAR: The Portuguese Science and Technology Foundation ( PTDC/SAU - FAR/113100/2009