Cohesive mixed-mode damage model applied to the simulation of the mechanical behaviour of a repaired sandwich beam

The behaviour of a repaired sandwich beam loaded under four point bending is simulated using theABAQUS® software. Both overlap and scarf repair, suitable for sandwich structures, were simulatedconsidering two dimensional nonlinear material and geometrical analysis. Special developed interfacefinite elements including a trapezoidal cohesive mixed-mode damage model appropriate for ductileadhesives were used in order to simulate the adhesive layer. The proposed model is intended to replacethe continuum finite elements traditionally used to simulate the adhesive layer, thus reducing thecomputational effort necessary to obtain results. Double Cantilever Beam (DCB) and End NotchedFlexure (ENF) tests were used to obtain the cohesive laws of the adhesive in pure modes I and II,respectively. The fracture energies (JIc and JIIc) are obtained using a new data reduction scheme based oncrack equivalent concept allowing overcoming crack monitoring difficulties during propagation in thesefracture characterization tests. The remaining cohesive parameters (1,I, 1,II, 2,I, 2,II)are obtained usingan inverse method, which is based on the fitting of the numerical and experimental P- curves by a finetuning process. This procedure allows fixing the referred cohesive parameters to be used in the stressanalyses and strength predictions of repaired sandwiches. The numerical model allowed the simulation ofdamage initiation and growth. Geometric changes, such as patch overlap length and scarf angle wereconsidered in the analysis in order to assess their influence on the repair efficiency. Conclusions weredrawn about design guidelines of sandwich composite material repair

Evaluation of R-curves and cohesive law in mode I of European beech

This work addresses the determination of the cohesive laws in Mode I and tangential–longitudinal (TL) crack propagation system of Fagus Sylvatica L. This species is one of the ever-growing and most widely used hardwood species in Europe for engineered timber products. Double Cantilever Beam (DCB) tests are performed. The strain energy release rate ( G I) is derived from the R-curves by applying the Compliance-Based Beam Method (CBBM), which has the advantage of not requiring the measurement of the crack length during propagation, but only the global load–displacement curves. The cohesive law of the material is determined from the relationship between G I, and the crack tip opening displacement (CTOD) monitored for each specimen using Digital Image Correlation (DIC). Numerical finite element models are developed by implementing the average cohesive law through Cohesive Zone Models (CZM). An average G I value of 0.46 kJ / m 2 is obtained for this species. The numerical load–displacement curves are consistent with the experimental results, which demonstrates the suitability of the method for the identification of the cohesive laws in beech. The fracture properties obtained are essential in the development of advanced and reliable numerical models in timber engineering design using this species.publishersversionpublishe

Modelação por elementos finitos do processo de furação em laminados de carbono/epóxido

Neste trabalho apresentam-se os resultados obtidos em simulações numéricas dafuração de laminados de carbono/epóxido usando elementos sólidos tridimensionais dosoftware ABAQUS® Explicit. O início e propagação do dano são simulados recorrendo ainstruções específicas do programa, bem como a remoção dos elementos ao longo doprocesso. Os resultados obtidos numericamente são comparados com resultadosexperimentais obtidos previamente pelos autores. Verifica-se uma boa concordância entre osresultados numéricos e os experimentais, confirmando a validade do modelo proposto

Magnon delocalization in ferromagnetic chains with long-range correlated disorder

We study one-magnon excitations in a random ferromagnetic Heisenberg chain with long-range correlations in the coupling constant distribution. By employing an exact diagonalization procedure, we compute the localization length of all one-magnon states within the band of allowed energies $E$. The random distribution of coupling constants was assumed to have a power spectrum decaying as $S(k)\propto 1/k^{\alpha}$. We found that for $\alpha < 1$, one-magnon excitations remain exponentially localized with the localization length $\xi$ diverging as 1/E. For $\alpha = 1$ a faster divergence of $\xi$ is obtained. For any $\alpha > 1$, a phase of delocalized magnons emerges at the bottom of the band. We characterize the scaling behavior of the localization length on all regimes and relate it with the scaling properties of the long-range correlated exchange coupling distribution.Comment: 7 Pages, 5 figures, to appear in Phys. Rev.

Thermal, mechanical and chemical analysis of poly(vinyl alcohol) multifilament and braided yarns

Poly(vinyl alcohol) (PVA) in multifilament and braided yarns (BY) forms presents great potential for the design of numerous applications. However, such solutions fail to accomplish their requirements if the chemical and thermomechanical behaviour is not sufficiently known. Hence, a comprehensive characterisation of PVA multifilament and three BY architectures (6, 8, and 10 yarns) was performed involving the application of several techniques to evaluate the morphological, chem- ical, thermal, and mechanical features of those structures. Scanning electron microscopy (SEM) was used to reveal structural and morphological information. Differential thermal analysis (DTA) pointed out the glass transition temperature of PVA at 76 °C and the corresponding crystalline melt- ing point at 210 °C. PVA BY exhibited higher tensile strength under monotonic quasi-static loading in comparison to their multifilament forms. Creep tests demonstrated that 6BY structures present the most deformable behaviour, while 8BY structures are the least deformable. Relaxation tests showed that 8BY architecture presents a more expressive variation of tensile stress, while 10BY of- fered the least. Dynamic mechanical analysis (DMA) revealed storage and loss moduli curves with similar transition peaks for the tested structures, except for the 10BY. Storage modulus is always four to six times higher than the loss modulus.This work was funded by European Regional Development funds (FEDER) through the Competitiveness and Internationalization Operational Program (POCI)—COMPETE andby Na-tional Funds through Portuguese Fundação para a Ciência e Tecnologia (FCT) under the project UID/EMS/50022/2020, UID/EEA/04436/2019 andUID/ CTM/00264/2019. Andrea Zille acknowledges financial support of the FCT through the project PTDC/CTM-TEX/28295/2017,and Nuno Dourado acknowledges financial support of the FCT through the project PTDC/EME-SIS/28225/2017. M.F.S.M. de Moura acknowledges the ‘Laboratório Associado de Energia, Transportes e Aeronáutica’ (LAETA) for the financial support

Manganese Defective Clustering: Influence on the Spectroscopic Features of Ceria-Based Nanomaterials

The influence of manganese modification on the spectroscopic features of manganese-doped CeO2 systems synthesized by the microwave-assisted hydrothermal route and their correlation with the presence of O defective structures were verified, focusing on their interaction with poisonous atmospheres. Raman and electron paramagnetic resonance studies confirmed the presence of defective clusters formed by dipoles and/or quadrupoles. The number of paramagnetic species was found to be inversely proportional to the doping concentration, resulting in an increase in the Mn2+ signal, likely due to the reduction of Mn3+ species after the interaction with CO. X-ray photoelectron spectroscopy data showed the pure system with 33% of its cerium species in the Ce3+ configuration, with an abrupt decrease to 19%, after the first modification with Mn, suggesting that 14% of the Ce3+ species are donating one electron to the Mn2+ ions, thus becoming nonparamagnetic Ce4+ species. On the contrary, 58% of the manganese species remain in the Mn2+ configuration with five unpaired electrons, corroborating the paramagnetic feature of the samples seen in the electron paramagnetic resonance study

WATER DEMAND AND WATER USE EFFICIENCY IN ‘PALMER’ MANGO CULTIVATION IN THE LOW-MIDDLE SÃO FRANCISCO VALLEY

ABSTRACT The study aimed to determine the evapotranspiration (ETc) of the mango cv. ‘Palmer’ over two productive cycles, analyzing water-use efficiency (WUE) and crop water productivity (CWP) to propose average crop coefficient (Kc) values for improving irrigation management under cultivation conditions in the Low-Middle São Francisco Valley. The study was conducted from July 2019 to May 2021 in a commercial ‘Palmer’ mango orchard in Petrolina, State of Pernambuco, Brazil. Micrometeorological data was collected throughout the experimental period. The crop evapotranspiration (ETc) was determined using Bowen ratio energy balance (BREB), and then the Kc, WUE, and CWP were determined. The highest ETc values occurred during the floral induction phase (5.14 ± 0.85 mm day-1), with a Kc of 0.85; however, the lowest values were observed during the fruit maturation phase (3.60 ± 0.73 mm day-1), with a Kc of 0.91. Average water consumption per cycle was 1445 mm, with a daily average of 4.39 mm day-1. WUE and CWP were 16.9 and 24.5 kg ha-1 mm-1, respectively. Average Kc values of 0.81, 0.76, 0.85, 0.90, 0.95, and 0.91 are recommended for the vegetative growth, rest period and shoot maturation, floral induction, flowering, fruit development, and fruit maturation phases, respectively

A genome survey of Moniliophthora perniciosa gives new insights into Witches' Broom Disease of cacao

<p>Abstract</p> <p>Background</p> <p>The basidiomycete fungus <it>Moniliophthora perniciosa </it>is the causal agent of Witches' Broom Disease (WBD) in cacao (<it>Theobroma cacao</it>). It is a hemibiotrophic pathogen that colonizes the apoplast of cacao's meristematic tissues as a biotrophic pathogen, switching to a saprotrophic lifestyle during later stages of infection. <it>M. perniciosa</it>, together with the related species <it>M. roreri</it>, are pathogens of aerial parts of the plant, an uncommon characteristic in the order Agaricales. A genome survey (1.9× coverage) of <it>M. perniciosa </it>was analyzed to evaluate the overall gene content of this phytopathogen.</p> <p>Results</p> <p>Genes encoding proteins involved in retrotransposition, reactive oxygen species (ROS) resistance, drug efflux transport and cell wall degradation were identified. The great number of genes encoding cytochrome P450 monooxygenases (1.15% of gene models) indicates that <it>M. perniciosa </it>has a great potential for detoxification, production of toxins and hormones; which may confer a high adaptive ability to the fungus. We have also discovered new genes encoding putative secreted polypeptides rich in cysteine, as well as genes related to methylotrophy and plant hormone biosynthesis (gibberellin and auxin). Analysis of gene families indicated that <it>M. perniciosa </it>have similar amounts of carboxylesterases and repertoires of plant cell wall degrading enzymes as other hemibiotrophic fungi. In addition, an approach for normalization of gene family data using incomplete genome data was developed and applied in <it>M. perniciosa </it>genome survey.</p> <p>Conclusion</p> <p>This genome survey gives an overview of the <it>M. perniciosa </it>genome, and reveals that a significant portion is involved in stress adaptation and plant necrosis, two necessary characteristics for a hemibiotrophic fungus to fulfill its infection cycle. Our analysis provides new evidence revealing potential adaptive traits that may play major roles in the mechanisms of pathogenicity in the <it>M. perniciosa</it>/cacao pathosystem.</p