A pilot study examining garment severance damage caused by a trained sharp-weapon user

The pilot study summarized in this paper aimed to raise awareness of a gap that exists in the forensic textile science literature about damage caused to clothing by trained sharp-weapon users. A male trained in the Filipino martial arts discipline of Eskrima performed attack techniques on a physical model of a male torso covered with a 97% cotton/3% elastane knitted T-shirt, that is, a garment commonly worn by males. Fabric severance appearance created by three different, but commonly available, knives was evaluated. High-speed video was used to capture each attack. After each attack the resulting damage to the garment was assessed. This pilot study highlighted differences in severances associated with weapon selection, that is, not all knives resulted in similar patterns of textile damage. In addition, a mixture of stab and slash severances were observed. The findings demonstrated the possible misinterpretation of textile damage under these circumstances compared to damage patterns reported in the existing forensic textile science literature for more commonly occurring knife attacks (i.e. stabbings)

Inversion of stellar statistics equation for the Galactic Bulge

A method based on Lucy (1974, AJ 79, 745) iterative algorithm is developed to invert the equation of stellar statistics for the Galactic bulge and is then applied to the K-band star counts from the Two-Micron Galactic Survey in a number of off-plane regions (10 deg.>|b|>2 deg., |l|<15 deg.). The top end of the K-band luminosity function is derived and the morphology of the stellar density function is fitted to triaxial ellipsoids, assuming a non-variable luminosity function within the bulge. The results, which have already been outlined by Lopez-Corredoira et al.(1997, MNRAS 292, L15), are shown in this paper with a full explanation of the steps of the inversion: the luminosity function shows a sharp decrease brighter than M_K=-8.0 mag when compared with the disc population; the bulge fits triaxial ellipsoids with the major axis in the Galactic plane at an angle with the line of sight to the Galactic centre of 12 deg. in the first quadrant; the axial ratios are 1:0.54:0.33, and the distance of the Sun from the centre of the triaxial ellipsoid is 7860 pc. The major-minor axial ratio of the ellipsoids is found not to be constant. However, the interpretation of this is controversial. An eccentricity of the true density-ellipsoid gradient and a population gradient are two possible explanations. The best fit for the stellar density, for 1300 pc<t<3000 pc, are calculated for both cases, assuming an ellipsoidal distribution with constant axial ratios, and when K_z is allowed to vary. From these, the total number of bulge stars is ~ 3 10^{10} or ~ 4 10^{10}, respectively.Comment: 19 pages, 23 figures, accepted in MNRA

Invariant manifolds and the geometry of front propagation in fluid flows

Recent theoretical and experimental work has demonstrated the existence of one-sided, invariant barriers to the propagation of reaction-diffusion fronts in quasi-two-dimensional periodically-driven fluid flows. These barriers were called burning invariant manifolds (BIMs). We provide a detailed theoretical analysis of BIMs, providing criteria for their existence, a classification of their stability, a formalization of their barrier property, and mechanisms by which the barriers can be circumvented. This analysis assumes the sharp front limit and negligible feedback of the front on the fluid velocity. A low-dimensional dynamical systems analysis provides the core of our results.Comment: 14 pages, 11 figures. To appear in Chaos Focus Issue: Chemo-Hydrodynamic Patterns and Instabilities (2012

Challenging the Status Quo: Infusing Non-Western Ideas into Occupational Therapy Education and Practice

The authors of this Topics in Education article, who are both occupational therapy educators, reflect on challenging concepts related to decolonizing occupational therapy education, an idea they first encountered at the 2018 World Federation of Occupational Therapists Congress. They acknowledge that Western views heavily influence the occupational therapy concepts they teach to their students. The downside of approaching occupational therapy education and practice primarily from a Western worldview is that occupational therapy students and practitioners may perpetuate societal inequities through their practices and are not well-prepared to address the occupational needs of individuals and communities around the world. This article describes existing alternative views, including occupational consciousness, cultural humility, and ubuntu, and how these concepts can be applied to occupational therapy practice and education. Practical recommendations are made about reconsidering how occupational therapy concepts are taught in educational settings and applied in practice

Investigating the use of concealable and disguised knives

Knife-carrying and knife crime is a significant issue in many countries. There are a number of knives available for purchase that are designed to be concealable, or that are disguised as everyday objects e.g. combs, pens and belts. In addition, an experienced knife-user will be able to conceal knives around their person. The aim of the work summarised in this paper was to study the concealment and deployment of a range of such weapons and to raise awareness of such threats to the blue-light community (police, ambulance, firefighters and other first responders); allow comment to be made on the effectiveness of various scenarios that a knife-carrier might use to carry and deploy a disguised or concealed knife; and measure the time to deployment of a disguised or concealed knife from different locations on an assailant’s body so that suitable defensive responses can be designed and assessed. High-speed video was used to assist in studying attack sequences and allowed assessment of the speed of attack; this typically varied from 0.5 seconds to 2.3 seconds

The use of gelatine in wound ballistics research

Blocks of gelatine are used in both lethality and survivability studies for broadly the same reason, i.e. comparison of ammunition effects using a material that it is assumed represents (some part of) the human body. The gelatine is used to visualise the temporary and permanent wound profiles; elements of which are recognised as providing a reasonable approximation to wounding in humans. One set of researchers aim to improve the lethality of the projectile, and the other to understand the effects of the projectile on the body to improve survivability. Research areas that use gelatine blocks are diverse and include ammunition designers, the medical and forensics communities and designers of ballistic protective equipment (including body armour). This paper aims to provide an overarching review of the use of gelatine for wound ballistics studies; it is not intended to provide an extensive review of wound ballistics as that already exists, e.g. Legal Med 23:21–29, 2016. Key messages are that test variables, projectile type (bullet, fragmentation), impact site on the body and intermediate layers (e.g. clothing, personal protective equipment (PPE)) can affect the resulting wound profiles

A protected area influences genotype-specific survival and the structure of a Canis hybrid zone

It is widely recognized that protected areas can strongly influence ecological systems and that hybridization is an important conservation issue. However, previous studies have not explicitly considered the influence of protected areas on hybridization dynamics. Eastern wolves are a species of special concern and their distribution is largely restricted to a protected population in Algonquin Provincial Park (APP), Ontario, Canada, where they are the numerically dominant canid. We studied intrinsic and extrinsic factors influencing survival and cause-specific mortality of hybrid and parental canids in the three-species hybrid zone between eastern wolves, eastern coyotes, and gray wolves in and adjacent to APP. Mortality risk for eastern wolves in areas adjacent to APP was significantly higher than for other sympatric Canis types outside of APP, and for eastern wolves and other canids within APP. Outside of APP, the annual mortality rate of all canids by harvest (24%) was higher than for other causes of death (4–7%). Furthermore, eastern wolves (hazard ratio ¼ 3.5) and nonresidents (transients and dispersing animals, hazard ratio ¼ 2.7) were more likely to die from harvest relative to other Canis types and residents, respectively. Thus, eastern wolves dispersing from APP were especially vulnerable to harvest mortality. For residents, eastern wolf survival was more negatively influenced by increased road density than for other Canis types, further highlighting the sensitivity of eastern wolves to human disturbance. A cycle of dispersal from APP followed by high rates of mortality and hybridization appears to maintain eastern wolves at low density adjacent to APP, limiting the potential for expansion beyond the protected area. However, high survival and numerical dominance of eastern wolves within APP suggest that protected areas can allow rare hybridizing species to persist even if their demographic performance is compromised and barriers to hybridization are largely absent in the adjacent matrix

Microwave Temperature Profiler Mounted in a Standard Airborne Research Canister

Many atmospheric research aircraft use a standard canister design to mount instruments, as this significantly facilitates their electrical and mechanical integration and thereby reduces cost. Based on more than 30 years of airborne science experience with the Microwave Temperature Profiler (MTP), the MTP has been repackaged with state-of-the-art electronics and other design improvements to fly in one of these standard canisters. All of the controlling electronics are integrated on a single 4 ~5-in. (.10 ~13- cm) multi-layer PCB (printed circuit board) with surface-mount hardware. Improved circuit design, including a self-calibrating RTD (resistive temperature detector) multiplexer, was implemented in order to reduce the size and mass of the electronics while providing increased capability. A new microcontroller-based temperature controller board was designed, providing better control with fewer components. Five such boards are used to provide local control of the temperature in various areas of the instrument, improving radiometric performance. The new stepper motor has an embedded controller eliminating the need for a separate controller board. The reference target is heated to avoid possible emissivity (and hence calibration) changes due to moisture contamination in humid environments, as well as avoiding issues with ambient targets during ascent and descent. The radiometer is a double-sideband heterodyne receiver tuned sequentially to individual oxygen emission lines near 60 GHz, with the line selection and intermediate frequency bandwidths chosen to accommodate the altitude range of the aircraft and mission

The effect of helmet materials and simulated bone and tissue layers on bullet behaviour in a gelatine model of overmatch penetrating head injury

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/)The aim of this work was to simulate an overmatch ballistic event against a head wearing a helmet. The experiments were designed to understand how layers of bone (or synthetic bone), synthetic skin and currently used helmet materials influence the behaviour of full metal jacket mild steel core (FMJ MSC) 7.62 × 39 mm bullets, impacting on targets with a mean velocity of 650 m/s. Bullet behaviour within 10% (by mass) gelatine blocks was assessed by measurements made of the temporary cavity within the blocks using high-speed video and of the permanent cavity by dissecting blocks post firing. While ANOVA did not find significant difference at the 0.05 level in the mean values of most of the measurements, there was a significant difference in neck length within the gelatine blocks. The addition of material layers did produce greater variability in the temporary cavity measurements under some of the conditions. One of the synthetic bone polymers with a synthetic skin layer produced similar results within the gelatine blocks to the horse scapulae (with residual tissue) and may be suitable for future ballistic experiments