673 research outputs found
Mesh refinement in a two-dimensional large eddy simulation of a forced shear layer
A series of large eddy simulations are made of a forced shear layer and compared with experimental data. Several mesh densities were examined to separate the effect of numerical inaccuracy from modeling deficiencies. The turbulence model that was used to represent small scale, 3-D motions correctly predicted some gross features of the flow field, but appears to be structurally incorrect. The main effect of mesh refinement was to act as a filter on the scale of vortices that developed from the inflow boundary conditions
Time-accurate simulations of a shear layer forced at a single frequency
Calculations are presented for the forced shear layer studied experimentally by Oster and Wygnanski, and Weisbrot. Two different computational approaches are examined: Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES). The DNS approach solves the full three dimensional Navier-Stokes equations for a temporally evolving mixing layer, while the LES approach solves the two dimensional Navier-Stokes equations with a subgrid scale turbulence model. While the comparison between these calculations and experimental data was hampered by a lack of information on the inflow boundary conditions, the calculations are shown to qualitatively agree with several aspects of the experiment. The sensitivity of these calculations to factors such as mesh refinement and Reynolds number is illustrated
Millisecond accuracy video display using OpenGL under Linux
To measure people’s reaction times to the nearest millisecond, it is necessary to know exactly when
a stimulus is displayed. This article describes how to display stimuli with millisecond accuracy on a
normal CRT monitor, using a PC running Linux. A simple C program is presented to illustrate how this
may be done within X Windows using the OpenGL rendering system. A test of this system is reported
that demonstrates that stimuli may be consistently displayed with millisecond accuracy. An algorithm
is presented that allows the exact time of stimulus presentation to be deduced, even if there are relatively
large errors in measuring the display time
Autonomous three-dimensional formation flight for a swarm of unmanned aerial vehicles
This paper investigates the development of a new guidance algorithm for a formation of unmanned aerial vehicles. Using the new approach of bifurcating potential fields, it is shown that a formation of unmanned aerial vehicles can be successfully controlled such that verifiable autonomous patterns are achieved, with a simple parameter switch allowing for transitions between patterns. The key contribution that this paper presents is in the development of a new bounded bifurcating potential field that avoids saturating the vehicle actuators, which is essential for real or safety-critical applications. To demonstrate this, a guidance and control method is developed, based on a six-degreeof-freedom linearized aircraft model, showing that, in simulation, three-dimensional formation flight for a swarm of unmanned aerial vehicles can be achieved
Thermal conductivity measurement of liquids in a microfluidic device
A new microfluidic-based approach to measuring liquid thermal conductivity is developed to address the requirement in many practical applications for measurements using small (microlitre) sample size and integration into a compact device. The approach also gives the possibility of high-throughput testing. A resistance heater and temperature sensor are incorporated into a glass microfluidic chip to allow transmission and detection of a planar thermal wave crossing a thin layer of the sample. The device is designed so that heat transfer is locally one-dimensional during a short initial time period. This allows the detected temperature transient to be separated into two distinct components: a short-time, purely one-dimensional part from which sample thermal conductivity can be determined and a remaining long-time part containing the effects of three-dimensionality and of the finite size of surrounding thermal reservoirs. Identification of the one-dimensional component yields a steady temperature difference from which sample thermal conductivity can be determined. Calibration is required to give correct representation of changing heater resistance, system layer thicknesses and solid material thermal conductivities with temperature. In this preliminary study, methanol/water mixtures are measured at atmospheric pressure over the temperature range 30–50°C. The results show that the device has produced a measurement accuracy of within 2.5% over the range of thermal conductivity and temperature of the tests. A relation between measurement uncertainty and the geometric and thermal properties of the system is derived and this is used to identify ways that error could be further reduced
Anti-Nirvana: crime, culture and instrumentalism in the age of insecurity
‘Anti-Nirvana’ explores the relationship between consumer culture, media and criminal motivations. It has appeared consistently on the list of the top-ten most-read articles in this award-winning international journal, and it mounts a serious neo-Freudian challenge to the predominant naturalistic notion of ‘resistance’ at the heart of liberal criminology and media studies. It is also cited in the Oxford Handbook of Criminology and other criminology texts as a persuasive argument in support of the theory that criminality amongst young people is strongly linked to the acquisitive values of consumerism and the images of possessive individualism that dominate mass media
The appropriation of hegemonic masculinity within selected research on men's health
Connell's hegemonic masculinity thesis (HMT) has occupied a relatively dominant position within contemporary research exploring the lives of men. Messerschmidt has conducted a review of recent literature that purports to use HMT, he describes in detail some of the ways Connell's work has been appropriated. Taking Messerschmidt's lead, this paper explores a small selection of men's health research that employ HMT as a central organising theme. Such a narrow focus and limited sample enables the theoretical, conceptual and empirical contributions of engagements with Connell's work to be critically explored in detail. This paper provides colleagues with clear examples of ways in which reified and reductive account of masculinity, are still being reproduced in contemporary analyses of men's lives. In calling for researchers to critically reflect upon their usage of Connell's thesis in more detail, my aim is to increase the subtlety and sophistication of such works. A further hope is that by highlighting specific examples of the need to appraise the relevance and adequacy of HMT as a conceptual frame of lived experiences, we might encourage researchers to access the multitude of different theoretical positions that speak to the lives of men
Elimination of Arctic Variant Rabies in Red Foxes, Metropolitan Toronto
To control the arctic variant of rabies virus in red foxes, 332,257 bait doses containing live, attenuated Evelyn-Rokitnicki-Abelseth rabies vaccine were distributed in greater metropolitan Toronto during 1989–1999. Human and pet contact with bait was minimal, and no adverse reactions to the vaccine were noted. Significantly fewer rabid foxes were found during the 17 years after fox baiting (5 cases during 1990–2006) than in the 17 years before (96 cases during 1973–1989). The last report of a rabid fox in metropolitan Toronto was in 1996 (reporting period through September 2006), which confirms that distributing oral rabies vaccine bait is a feasible tactic for the control of rabies in foxes in urban environments
Finding apparent horizons and other two-surfaces of constant expansion
Apparent horizons are structures of spacelike hypersurfaces that can be
determined locally in time. Closed surfaces of constant expansion (CE surfaces)
are a generalisation of apparent horizons. I present an efficient method for
locating CE surfaces. This method uses an explicit representation of the
surface, allowing for arbitrary resolutions and, in principle, shapes. The CE
surface equation is then solved as a nonlinear elliptic equation.
It is reasonable to assume that CE surfaces foliate a spacelike hypersurface
outside of some interior region, thus defining an invariant (but still
slicing-dependent) radial coordinate. This can be used to determine gauge modes
and to compare time evolutions with different gauge conditions. CE surfaces
also provide an efficient way to find new apparent horizons as they appear e.g.
in binary black hole simulations.Comment: 21 pages, 8 figures; two references adde
Reproducible immortalization of erythroblasts from multiple stem cell sources provides approach for sustainable RBC therapeutics
- …