Exploration of the material property space for chemical looping air separation applied to carbon capture and storage

Oxy-fuel combustion is one route to large scale carbon capture and storage. Fuel is combusted in oxygen rather than air, allowing pure CO2 to be captured and sequestered. Currently, the required oxygen is produced via cryogenic air separation, which imposes a significant energy penalty. Chemical looping air separation (CLAS) is an alternative process for the production of oxygen, and relies on the repeated oxidation and reduction of solid oxygen carriers (typically metal oxides). The energy efficiency is governed by the thermodynamic properties of the oxygen carrier material, and how well the CLAS process can be heat-integrated with the process consuming oxygen. In this study, key thermodynamic properties have been identified and assessed using a steady state model of a CLAS-oxy-fuel power plant. It is demonstrated that energy penalties as low as 1.5 percentage points can be obtained for a narrow range of material properties. Based on density functional theory calculations, 14 oxygen carrier systems, which are novel or have received little attention, have been identified that could potentially achieve this minimal energy penalt

Screening and Characterization of Ternary Oxides for High-Temperature Carbon Capture

Carbon capture and storage (CCS) is increasingly being accepted as a necessary component of any effort to mitigate the impact of anthropogenic climate change, as it is both a relatively mature and easily implemented technology. High-temperature CO2 absorption looping is a promising process that offers a much lower energy penalty than the current state of the art amine scrubbing techniques, but more effective materials are required for widespread implementation. This work describes the experimental characterisation and CO2 absorption properties of several new ternary transition metal oxides predicted by high-throughput DFT screening. One material reported here, Li5SbO5, displays reversible CO2 sorption, and maintains 72 % of its theoretical capacity out to 25 cycles. The results in this work are used to discuss major influences on CO2 absorption capacity and rate, including the role of the crystal structure, the transition metal, the alkali or alkaline earth metal, and the competing roles of thermodynamics and kinetics. Notably, this work shows the extent and rate to which ternary metal oxides carbonate is driven primarily by the identity of the alkali or alkaline earth ion and the nature of the crystal structure, whereas the identity of the transition ion carries little influence in the systems studied here

Structural evolution in synthetic, Ca-based sorbents for carbon capture

The carbonation of CaO-based materials at high temperatures (e.g. > 600°C) is a promising method of capturing CO₂ emitted from, e.g. the combustion of carbonaceous fuels. The resulting CaCO₃ can be regenerated by calcination at a temperature at which the equilibrium partial pressure exceeds that of the local partial pressure of CO₂ (e.g. 950°C). A process involving repeated cycles of carbonation and calcination of a calcareous material is called calcium looping. The capacity of a CaO-based sorbent to accept and reject CO₂ over many cycles is governed by a number of factors, such as chemical composition, surface morphology and pore structure, all of which often evolve with cycling. The present paper investigates the underlying mechanisms controlling the evolution of the micro-structures of a series of synthetic sorbents consisting of CaO mixed with the inert supports Ca₁₂Al₁₄O₃₃ and MgO. These sorbents were subjected to cycles of calcination and carbonation and were characterised using a variety of in situ and ex situ techniques. It was found that the balance between the degree of surface cracking during calcination and the extent of sintering during carbonation was responsible for changes in uptake during cycling, giving an increase in uptake for the supported CaO and a decrease for the unsupported CaO.The authors would like to thank the Australian Synchtrotron for the award of beamtime, and Justin Kimpton and Qinfen Gu for their help with the design and operation of the in situ gas flow capillary XRD cell. Mr Zlatko Zaracevic is acknowledged for the BET measurements. W.L acknowledges funding from the National Research Foundation (NRF), Prime Minister’s Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) programme. B.G acknowledges the EU Research Fund for Coal and Steel (project number RFCR-CT-2012-00008). M.T.D acknowledges funding from the Cambridge Commonwealth Trusts and Trinity College, Cambridge and the EU ERC for an advanced fellowship for CPG. D.S.S acknowledges financial support by Engineering and Physical Sciences Research Council (EPSRC). C.D.L acknowledges funding by the Australian Research Council (Discovery Projects).This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.ces.2015.09.01

A Bayesian approach for estimating typhoid fever incidence from large-scale facility-based passive surveillance data

Decisions about typhoid fever prevention and control are based on estimates of typhoid incidence and their uncertainty. Lack of specific clinical diagnostic criteria, poorly sensitive diagnostic tests, and scarcity of accurate and complete datasets contribute to difficulties in calculating age-specific population-level typhoid incidence. Using data from the Strategic Typhoid Alliance across Africa and Asia program, we integrated demographic censuses, healthcare utilization surveys, facility-based surveillance, and serological surveillance from Malawi, Nepal, and Bangladesh to account for under-detection of cases. We developed a Bayesian approach that adjusts the count of reported blood-culture-positive cases for blood culture detection, blood culture collection, and healthcare seeking—and how these factors vary by age—while combining information from prior published studies. We validated the model using simulated data. The ratio of observed to adjusted incidence rates was 7.7 (95% credible interval [CrI]: 6.0-12.4) in Malawi, 14.4 (95% CrI: 9.3-24.9) in Nepal, and 7.0 (95% CrI: 5.6-9.2) in Bangladesh. The probability of blood culture collection led to the largest adjustment in Malawi, while the probability of seeking healthcare contributed the most in Nepal and Bangladesh; adjustment factors varied by age. Adjusted incidence rates were within or below the seroincidence rate limits of typhoid infection. Estimates of blood-culture-confirmed typhoid fever without these adjustments results in considerable underestimation of the true incidence of typhoid fever. Our approach allows each phase of the reporting process to be synthesized to estimate the adjusted incidence of typhoid fever while correctly characterizing uncertainty, which can inform decision-making for typhoid prevention and control

Socio-demographic, behavioural and cognitive correlates of work-related sitting time in German men and women

Background: Sitting time is ubiquitous for most adults in developed countries and is most prevalent in three domains: in the workplace, during transport and during leisure time. The correlates of prolonged sitting time in workplace settings are not well understood. Therefore, the aim of this study was to examine the gender-specific associations between the socio-demographic, behavioural and cognitive correlates of work-related sitting time. Methods: A cross-sectional sample of working German adults (n = 1515; 747 men; 43.5 ± 11.0 years) completed questionnaires regarding domain-specific sitting times and physical activity (PA) and answered statements concerning beliefs about sitting. To identify gender-specific correlates of work-related sitting time, we used a series of linear regressions. Results The overall median was 2 hours of work-related sitting time/day. Regression analyses showed for men (β = -.43) and for women (β = -.32) that work-related PA was negatively associated with work-related sitting time, but leisure-related PA was not a significant correlate. For women only, transport-related PA (β = -.07) was a negative correlate of work-related sitting time, suggesting increased sitting times during work with decreased PA in transport. Education and income levels were positively associated, and in women only, age (β = -.14) had a negative correlation with work-related sitting time. For both genders, TV-related sitting time was negatively associated with work-related sitting time. The only association with cognitive correlates was found in men for the belief ‘Sitting for long periods does not matter to me’ (β = .10) expressing a more positive attitude towards sitting with increasing sitting durations. Conclusions: The present findings show that in particular, higher educated men and women as well as young women are high-risk groups to target for reducing prolonged work-related sitting time. In addition, our findings propose considering increasing transport-related PA, especially in women, as well as promoting recreation-related PA in conjunction with efforts to reduce long work-related sitting times

Burden of enteric fever at three urban sites in Africa and Asia: a multicentre population-based study

Summary Background Enteric fever is a serious public health concern in many low-income and middle-income countries. Numerous data gaps exist concerning the epidemiology of Salmonella enterica serotype Typhi (S Typhi) and Salmonella enterica serotype Paratyphi (S Paratyphi), which are the causative agents of enteric fever. We aimed to determine the burden of enteric fever in three urban sites in Africa and Asia. Methods In this multicentre population-based study, we did a demographic census at three urban sites in Africa (Blantyre, Malawi) and Asia (Kathmandu, Nepal and Dhaka, Bangladesh) between June 1, 2016, and Sept 25, 2018. Households were selected randomly from the demographic census. Participants from within the geographical census area presenting to study health-care facilities were approached for recruitment if they had a history of fever for 72 h or more (later changed to >48 h) or temperature of 38·0°C or higher. Facility-based passive surveillance was done between Nov 11, 2016, and Dec 31, 2018, with blood-culture collection for febrile illness. We also did a community-based serological survey to obtain data on Vi-antibody defined infections. We calculated crude incidence for blood-culture-confirmed S Typhi and S Paratyphi infection, and calculated adjusted incidence and seroincidence of S Typhi blood-culture-confirmed infection. Findings 423 618 individuals were included in the demographic census, contributing 626 219 person-years of observation for febrile illness surveillance. 624 S Typhi and 108 S Paratyphi A isolates were collected from the blood of 12 082 febrile patients. Multidrug resistance was observed in 44% S Typhi isolates and fluoroquinolone resistance in 61% of S Typhi isolates. In Blantyre, the overall crude incidence of blood-culture confirmed S Typhi was 58 cases per 100 000 person-years of observation (95% CI 48–70); the adjusted incidence was 444 cases per 100 000 person-years of observation (95% credible interval [CrI] 347–717). The corresponding rates were 74 (95% CI 62–87) and 1062 (95% CrI 683–1839) in Kathmandu, and 161 (95% CI 145–179) and 1135 (95% CrI 898–1480) in Dhaka. S Paratyphi was not found in Blantyre; overall crude incidence of blood-culture-confirmed S Paratyphi A infection was 6 cases per 100 000 person-years of observation (95% CI 3–11) in Kathmandu and 42 (95% CI 34–52) in Dhaka. Seroconversion rates for S Typhi infection per 100 000 person-years estimated from anti-Vi seroconversion episodes in serological surveillance were 2505 episodes (95% CI 1605–3727) in Blantyre, 7631 (95% CI 5913–9691) in Kathmandu, and 3256 (95% CI 2432–4270) in Dhaka. Interpretation High disease incidence and rates of antimicrobial resistance were observed across three different transmission settings and thus necessitate multiple intervention strategies to achieve global control of these pathogens. Funding Wellcome Trust and the Bill & Melinda Gates Foundation

Oscillatory surface rheotaxis of swimming E. coli bacteria

Bacterial contamination of biological conducts, catheters or water resources is a major threat to public health and can be amplified by the ability of bacteria to swim upstream. The mechanisms of this rheotaxis, the reorientation with respect to flow gradients, often in complex and confined environments, are still poorly understood. Here, we follow individual E. coli bacteria swimming at surfaces under shear flow with two complementary experimental assays, based on 3D Lagrangian tracking and fluorescent flagellar labelling and we develop a theoretical model for their rheotactic motion. Three transitions are identified with increasing shear rate: Above a first critical shear rate, bacteria shift to swimming upstream. After a second threshold, we report the discovery of an oscillatory rheotaxis. Beyond a third transition, we further observe coexistence of rheotaxis along the positive and negative vorticity directions. A full theoretical analysis explains these regimes and predicts the corresponding critical shear rates. The predicted transitions as well as the oscillation dynamics are in good agreement with experimental observations. Our results shed new light on bacterial transport and reveal new strategies for contamination prevention.Comment: 12 pages, 5 figure

Evaluation of sit-stand workstations in an office setting: A randomised controlled trial

Background: Excessive sitting time is a risk factor for cardiovascular disease mortality and morbidity independent of physical activity. This aim of this study was to evaluate the impact of a sit-stand workstation on sitting time, and vascular, metabolic and musculoskeletal outcomes in office workers, and to investigate workstation acceptability and feasibility. Methods: A two-arm, parallel-group, individually randomised controlled trial was conducted in one organisation. Participants were asymptomatic full-time office workers aged ≥18 years. Each participant in the intervention arm had a sit-stand workstation installed on their workplace desk for 8 weeks. Participants in the control arm received no intervention. The primary outcome was workplace sitting time, assessed at 0, 4 and 8 weeks by an ecological momentary assessment diary. Secondary behavioural, cardiometabolic and musculoskeletal outcomes were assessed. Acceptability and feasibility were assessed via questionnaire and interview. ANCOVA and magnitude-based inferences examined intervention effects relative to controls at 4 and 8 weeks. Participants and researchers were not blind to group allocation. Results: Forty-seven participants were randomised (intervention n = 26; control n = 21). Relative to the control group at 8 weeks, the intervention group had a beneficial decrease in sitting time (-80.2 min/8-h workday (95 % CI = -129.0, -31.4); p = 0.002), increase in standing time (72.9 min/8-h workday (21.2, 124.6); p = 0.007) and decrease in total cholesterol (-0.40 mmol/L (-0.79, -0.003); p = 0.049). No harmful changes in musculoskeletal discomfort/pain were observed relative to controls, and beneficial changes in flow-mediated dilation and diastolic blood pressure were observed. Most participants self-reported that the workstation was easy to use and their work-related productivity did not decrease when using the device. Factors that negatively influenced workstation use were workstation design, the social environment, work tasks and habits. Conclusion: Short-term use of a feasible sit-stand workstation reduced daily sitting time and led to beneficial improvements in cardiometabolic risk parameters in asymptomatic office workers. These findings imply that if the observed use of the sit-stand workstations continued over a longer duration, sit-stand workstations may have important ramifications for the prevention and reduction of cardiometabolic risk in a large proportion of the working population. Trial registration: ClinicalTrials.gov NCT02496507