PHP12 THE PUBLIC'S PREFERENCE ON THE PRIORITIES IN HEALTH CARE

No abstract available

Maximizing dose reductions with cardiac CT

Multidetector computed tomography has come a long way in a short time, quickly becoming a standard tool in the cardiac imaging armamentarium. The promise of plaque imaging, combined with both anatomical visualization and stenosis detection, has made this a preferred first line test of many cardiologists and radiologists. This test is well suited to rule out coronary artery disease (obstruction) and still diagnosing subclinical plaque, with may be a good target for anti-atherosclerotic therapies. There has been recent criticism against CT imaging, and cardiac CT specifically, due to the high radiation doses that being employed. New advances have allowed for dramatic dose reductions. These include more routinely performed methods such as dose modulation, and newer methods such as prospective gating or minimizing the field of view. This paper will review the different applications to reduce cardiac CT radiation doses to nominal levels, potentially expanding the applications of cardiac CT by removing one of the biggest barriers

Room temperature plasmonic lasing in a continuous wave operation mode from an InGaN/GaN single nanorod with a low threshold

It is crucial to fabricate nano photonic devices such as nanolasers in order to meet the requirements for the integration of photonic and electronic circuits on the nanometre scale. The great difficulty is to break down a bottleneck as a result of the diffraction limit of light. Nanolasers on a subwavelength scale could potentially be fabricated based on the principle of surface plasmon amplification by stimulated emission of radiation (SPASER). However, a number of technological challenges will have to be overcome in order to achieve a SPASER with a low threshold, allowing for a continuous wave (cw) operation at room temperature. We report a nano-SPASER with a record low threshold at room temperature, optically pumped by using a cw diode laser. Our nano-SPASER consists of a single InGaN/GaN nanorod on a thin SiO2 spacer layer on a silver film. The nanorod containing InGaN/GaN multi-quantum-wells is fabricated by means of a cost-effective post-growth fabrication approach. The geometry of the nanorod/dielectric spacer/plasmonic metal composite allows us to have accurate control of the surface plasmon coupling, offering an opportunity to determine the optimal thickness of the dielectric spacer. This approach will open up a route for further fabrication of electrically injected plasmonic lasers

Correlation between Discharged Worms and Fecal Egg Counts in Human Clonorchiasis

Clonorchiasis is a major neglected disease in East Asia. Worm data in infected humans are very limited, and only egg counts roughly estimate infection burden of the worms. In endemic areas, we recruited infected cases and tried to collect the adult worms from them. They were treated with 3 doses of praziquantel, and purged next day under fasting. Adult worms of C. sinensis were recovered from their diarrheal feces. The worms discharged from humans after treatment are minimum confirmed numbers. The worm recovery rate noticeably increased in subjects with higher egg counts. The number of collected worms was well-correlated with the egg counts. Worm collection by praziquantel medication and purgation is a safe non-invasive method to get worm information from human. The present study confirms that at least 110 worms are infected in a human body with egg counts per gram of feces around 3,000, and egg productivity of a worm per day is around 4,000

Wearable high-performance pressure sensors based on three-dimensional electrospun conductive nanofibers

Polymer-based pressure sensors play a key role in realizing lightweight and inexpensive wearable devices for healthcare and environmental monitoring systems. Here, conductive core/shell polymer nanofibers composed of poly (vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP)/poly(3,4-ethylenedioxythiophene) (PEDOT) are fabricated using three-dimensional (3D) electrospinning and vapor deposition polymerization methods, and the resulting sponge-like 3D membranes are used to create piezoresistive-type pressure sensors. Interestingly, the PEDOT shell consists of well-dispersed spherical bumps, leading to the formation of a hierarchical conductive surface that enhances the sensitivity to external pressure. The sponge-like 3D mats exhibit a much higher pressure sensitivity than the conventional electrospun 2D mats due to their enhanced porosity and pressure-tunable contact area. Furthermore, large-area, wireless, 16 x 10 multiarray pressure sensors for the spatiotemporal mapping of multiple pressure points and wearable bands for monitoring blood pressure have been fabricated from these 3D mats. To the best of our knowledge, this is the first report of the fabrication of electrospun 3D membranes with nanoscopically engineered fibers that can detect changes in external pressure with high sensitivity. The developed method opens a new route to the mass production of polymer-based pressure sensors with high mechanical durability, which creates additional possibilities for the development of human-machine interfaces.11Ysciescopu

S100A7 (psoriasin) expression is associated with aggressive features and alteration of Jab1 in ductal carcinoma in situ of the breast

INTRODUCTION: The S100A7 (psoriasin) gene is highly expressed in ductal carcinoma in situ (DCIS) of the breast and can be downregulated in invasive carcinoma. Persistent S100A7 expression in invasive carcinoma is associated with a worse prognosis, and this effect may be mediated in part through interaction with the multifunctional cell signaling protein Jab1. METHODS: In order to investigate the relationship between S100A7 and progression from DCIS to invasive carcinoma, we studied S100A7 expression in 136 patients with DCIS (including 46 patients with associated invasive carcinoma) by immunohistochemistry. RESULTS: S100A7 expression was present in 63 out of 136 (46%) of DCIS lesions and was associated with estrogen receptor negative status (P = 0.0002), higher nuclear grade (P < 0.0001), necrosis (P < 0.0001) and inflammation (P < 0.0001). S100A7 status was no different between DCIS with and DCIS without an invasive component, but higher levels of S100A7 were present in DCIS associated with invasive carcinoma (P < 0.004). Analysis of a subset of cases showed that S100A7 expression was also associated with an increase in nuclear Jab1 (n = 43; P = 0.0019) and reduced p27(kip1 )(n = 47; P = 0.0168). In cases of DCIS associated with invasive carcinoma, there was also a significant reduction in S100A7 between in situ and invasive components (n = 46; P < 0.0001). In pure DCIS cases treated by local excision, there was no difference in frequency of S100A7 expression between patients with recurrence of DCIS (n = 9) and those without (n = 36). CONCLUSION: The findings reported here suggest that, although S100A7 may not be a marker for recurrence of DCIS, it is associated with poor prognostic markers in DCIS and may influence progression of breast carcinoma through its interaction with and influence on Jab1

Measurement of CP-violation asymmetries in D0 to Ks pi+ pi-

We report a measurement of time-integrated CP-violation asymmetries in the resonant substructure of the three-body decay D0 to Ks pi+ pi- using CDF II data corresponding to 6.0 invfb of integrated luminosity from Tevatron ppbar collisions at sqrt(s) = 1.96 TeV. The charm mesons used in this analysis come from D*+(2010) to D0 pi+ and D*-(2010) to D0bar pi-, where the production flavor of the charm meson is determined by the charge of the accompanying pion. We apply a Dalitz-amplitude analysis for the description of the dynamic decay structure and use two complementary approaches, namely a full Dalitz-plot fit employing the isobar model for the contributing resonances and a model-independent bin-by-bin comparison of the D0 and D0bar Dalitz plots. We find no CP-violation effects and measure an asymmetry of ACP = (-0.05 +- 0.57 (stat) +- 0.54 (syst))% for the overall integrated CP-violation asymmetry, consistent with the standard model prediction.Comment: 15 page

Biomimetic transferable surface for a real time control over wettability and photoerasable writing with water drop lens

We demonstrate a transferable device that can turn wettability of surfaces to sticky or slippy, as per requirement. It is composed of polymeric yarn with a fibrous structure, which can be lifted and placed on any surface to render it the unique wettability properties. We introduce Polyvinylidenefluoride (PVDF) random fiber as biomimetic rose petal surface. When it is decorated with PVDF nanofibers yarns, the random mesh transform from rose petal sticky state into grass leaf slippy state. When it is placed on sticky, hydrophilic metal coin, it converts the surface of the coin to super hydrophobic. Adjustments in the yarn system, like interyarn spacing, can be done in real time to influence its wettability, which is a unique feature. Next, we load the polymer with a photochromic compound for chemical restructuring. It affects the sliding angle of water drop and makes the fibers optically active. We also demonstrate a “water droplets lens” concept that enables erasable writing on photochromic rose petal sticky fibrous surface. The droplet on a highly hydrophobic surface acts as a ball lens to concentrate light onto a hot spot; thereby we demonstrate UV light writing with water lenses and visible light erasing