Efeitos do etil-cianoacrilato ou do octil-cianoacrilato sobre lesões corneais experimentais em coelhos

The use of ethyl-cyanoacrylate and octyl-cyanoacrylate were clinically and histopathologically compared on the corneas of 36 rabbits after lamellar keratectomy (standardized diameter and depth). The animals were distributed into two groups, one for each type of adhesive. From each group, six subgroups were histopathologically evaluated on the 3rd, 7th, 14th, 21st, 30th, and 60th day post-operative. General (daily) and ophthalmic (days 0, 1, 3, 5, 7, 14, 21, 30, 44, and 60) evaluations clinically indicated that there were significant differences for the variables water intake, attitude, blepharitis, corneal edema, and fluorescein test. The adhesive permanence time for octyl-cyanoacrylate (17.22 days) was greater than that for ethyl-cyanoacrylate (7.66 days). With respect to the histopathological evaluation, corneal epithelization and collagen organization occurred without severe complications. However, treatment with ethyl-cyanoacrylate led to a moderate inflammatory reaction in the initial phases. With octyl-cyanoacrylate, re-epithelization and collagen organization proceeded more slowly with a discrete inflammatory reaction in the initial phases. From clinical and histopathologic points of view, octyl-cyanoacrylate showed advantages over ethyl-cyanoacrylate, whereas wound healing was achieved in both groups without major complications.Comparou-se o uso do etil-cianoacrilato e do octil-cianoacrilato em córneas de 36 coelhos após ceratectomia lamelar (diâmetro e profundidade padronizados). Os animais foram distribuídos em dois grupos, segundo o tipo de adesivo, e redistribuídos em seis subgrupos com três animais cada, para as avaliações histológicas aos 3, 7, 14, 21, 30 e 60 dias de pós-operatório. As avaliações clínicas gerais (diárias) e as oftálmicas (dias 0, 1, 3, 5, 7, 14, 21, 30, 44 e 60), indicaram diferença entre os dois grupos, quanto ao consumo de água, atitude, blefarite, edema da córnea e teste da fluoresceína. O Tempo de permanência, sobre o leito corneal, do adesivo octil-cianoacrilato (17,22 dias), foi maior que o do etil-cianoacrulato (7,66 dias). A histopatologia, para ambos os grupos, mostrou que a re-epitelização e a organização do colágeno ocorreram sem graves intercorrências. O grupo tratado com o etil-cianoacrilato apresentou, nas fases iniciais, reação inflamatória mais evidente que o tratado com octil-cianoacrilato. Neste, a re-epitelização e a organização do colágeno ocorreram mais lentamente e com reação inflamatória discreta. Sob os pontos de vista clínico e de avaliação histológica simples, os resultados mostraram vantagens do octil-cianoacrilato, entretanto, a cicatrização da córnea ocorreu em ambos os grupos

Modelos de flares fotosféricos y cromosféricos

Presentamos modelos de fotósferas y cromosferas en flares solares de diversas importancias, basadas principalmente en el análisis teórico de las líneas del Ca II pero consistentes también con observaciones en Hα y las líneas altas de la serie de Balmer. Los modelos están basados en la solución de las ecuaciones de equilibrio estadístico y transparente de radiación para un átomo de calcio de 5 niveles y uno de hidrógeno de 3 niveles. Encontramos que incrementando las importancia del flare, la altura de la alta cromósfera y región de transición decrece en la atmósfera solar, produciendo con aumento de presión 60 y 600 veces respecto del Sol quieto e incrementando el gradiente de temperatura cromosférico. Estos cambios producen emisión brillante en las líneas del Ca II e H I con perfiles de acuerdo a las observaciones si se asume un campo de velocidades macroturbulento. Encontramos que la parte superior de la fotósfera en flares experimenta un aumento de temperatura entre 100 y 200 K y el mínimo de temperatura ocurre más abajo en la atmósfera solar que en regiones activas. Estos resultados sugieren u calentamiento fotosférico significante, que no ha sido predicho por anteriores modelos.Asociación Argentina de Astronomí

Comparison of Microstructures and Mechanical Properties for Solid Cobalt-Base Alloy Components and Biomedical Implant Prototypes Fabricated by Electron Beam Melting

The microstructures and mechanical behavior of simple, as-fabricated, solid geometries (with a density of 8.4 g/cm3), as-fabricated and fabricated and annealed femoral (knee) prototypes all produced by additive manufacturing (AM) using electron beam melting (EBM) of Co-26Cr-6Mo-0.2C powder are examined and compared in this study. Microstructures and microstructural issues are examined by optical metallography, SEM, TEM, EDS, and XRD while mechanical properties included selective specimen tensile testing and Vickers microindentation (HV) and Rockwell C-scale (HRC) hardness measurements. Orthogonal (X-Y) melt scanning of the electron beam during AM produced unique, orthogonal and related Cr23C6 carbide (precipitate) cellular arrays with dimensions of ~2μm in the build plane perpendicular to the build direction, while connected carbide columns were formed in the vertical plane, parallel to the build direction.Mechanical Engineerin

Microstructure Architecture Development in Metals and Alloys By Additive Manufacturing Using Electron Beam Melting

The concept of materials with controlled microstructural architecture (MCMA) to develop and fabricate structural materials with novel and possibly superior properties and performance characteristics is a new paradigm or paradigm extension for materials science and engineering. In the conventional materials science and engineering paradigm, structure (microstructure), properties, processing, and performance features are linked in the development of desirable materials properties and performance through processing methodologies which manipulate microstructures. For many metal or alloy systems, thermomechanical treatment combining controlled amounts of plastic deformation with heat treatment or aging cycles can achieve improved mechanical properties beyond those attainable by conventional processing alone (such as rolling or forging for example) through controlled microstructure development. In this paper we illustrate a new concept involving the fabrication of microstructural architectures by the process development and selective manipulation of these microstructures ideally defining material design space. This allows for the additional or independent manipulation of material properties by additive manufacturing (AM) using electron beam melting (EBM). Specifically we demonstrate the novel development of a carbide (M23C6) architecture in the AM of a Co-base alloy and an oxide (Cu2O) precipitate-dislocation architecture in the AM of an oxygen-containing Cu. While more conventional processing can produce various precipitate microstructures in these materials, EBM produces spatial arrays of precipitate columns or columnar-like features often oriented in the build direction. These microstructural architectures are observed by optical microscopy and scanning and transmission electron microscopy. Prospects for EBM architecture development in precipitation-hardenable Al alloys is also discussed. In the EBM build process using precursor powders, the electron beam parameters (including beam focus, scan speed and sequencing) produce localized, requisite thermodynamic regimes which create or organize the precipitate-related spatial arrays. This feature demonstrates the utility of AM not only in the fabrication of complex components, but also prospects for selective property design using CAD for MCMA development: a new or extended processing-microstructure-property-performance paradigm for materials science and engineering in advanced manufacturing involving solid free-form fabrication (SFF).Mechanical Engineerin

A phase-field model of Hele-Shaw flows in the high viscosity contrast regime

A one-sided phase-field model is proposed to study the dynamics of unstable interfaces of Hele-Shaw flows in the high viscosity contrast regime. The corresponding macroscopic equations are obtained by means of an asymptotic expansion from the phase-field model. Numerical integrations of the phase-field model in a rectangular Hele-Shaw cell reproduce finger competition with the final evolution to a steady state finger the width of which goes to one half of the channel width as the velocity increases

The effects of an intronic polymorphism in TOMM40 and APOE genotypes in sporadic inclusion body myositis.

A previous study showed that, in carriers of the apolipoprotein E (APOE) genotype ε3/ε3 or ε3/ε4, the presence of a very long (VL) polyT repeat allele in "translocase of outer mitochondrial membrane 40" (TOMM40) was less frequent in patients with sporadic inclusion body myositis (sIBM) compared with controls and associated with a later age of sIBM symptom onset, suggesting a protective effect of this haplotype. To further investigate the influence of these genetic factors in sIBM, we analyzed a large sIBM cohort of 158 cases as part of an International sIBM Genetics Study. No significant association was found between APOE or TOMM40 genotypes and the risk of developing sIBM. We found that the presence of at least 1 VL polyT repeat allele in TOMM40 was significantly associated with about 4 years later onset of sIBM symptoms. The age of onset was delayed by 5 years when the patients were also carriers of the APOE genotype ε3/ε3. In addition, males were likely to have a later age of onset than females. Therefore, the TOMM40 VL polyT repeat, although not influencing disease susceptibility, has a disease-modifying effect on sIBM, which can be enhanced by the APOE genotype ε3/ε3

Association Of Bartonella Species With Wild And Synanthropic Rodents In Different Brazilian Biomes

Bartonella spp. comprise an ecologically successful group of microorganisms that infect erythrocytes and have adapted to different hosts, which include a wide range of mammals, besides humans. Rodents are reservoirs of about two-thirds of Bartonella spp. described to date; and some of them have been implicated as causative agents of human diseases. In our study, we performed molecular and phylogenetic analyses of Bartonella spp. infecting wild rodents from five different Brazilian biomes. In order to characterize the genetic diversity of Bartonella spp., we performed a robust analysis based on three target genes, followed by sequencing, Bayesian inference, and maximum likelihood analysis. Bartonella spp. were detected in 25.6% (117/457) of rodent spleen samples analyzed, and this occurrence varied among different biomes. The diversity analysis of gltA sequences showed the presence of 15 different haplotypes. Analysis of the phylogenetic relationship of gltA sequences performed by Bayesian inference and maximum likelihood showed that the Bartonella species detected in rodents from Brazil was closely related to the phylogenetic group A detected in other cricetid rodents from North America, probably constituting only one species. Last, the Bartonella species genogroup identified in the present study formed a monophyletic group that included Bartonella samples from seven different rodent species distributed in three distinct biomes. In conclusion, our study showed that the occurrence of Bartonella bacteria in rodents is much more frequent and widespread than previously recognized. © 2016, American Society for Microbiology. All Rights Reserved.82247154716

Genotipagem de Toxoplasma gondii em galinhas domésticas em uma área rural do Rio Grande do Sul, Brasil

Free-range chickens may ingest oocysts of T. gondii present in the environment and consequently harbor virulent strains of this parasite in different tissues, without any clinical signs. Isolation of T. gondii through bioassays on mice and cats from naturally infected chicken tissues has been described in several countries, demonstrating the importance of free-range chickens in the transmission of this parasite. The aim of this study was the genotypic characterization of T. gondii isolates obtained from naturally infected free-range chickens in a rural area of the state of Rio Grande do Sul, Brazil. Brain and heart tissue from 12 chickens seropositive for T. gondii were processed using peptic digestion technique for parasite isolation. From 12 samples subjected to mouse bioassay, nine isolates were obtained. RFLP-PCR genotypic characterization was performed using 11 genetic markers: SAG1, 5'-3'SAG2, alt.SAG2, SAG3, BTUB, GRA6, c22-8, c29- 2, L358, PK1 and Apico. Genetic characterization of the isolates revealed the presence of five atypical genotypes according to ToxoDB (# 11, # 55, # 64, # 140 and # 163). Our results showed a wide genetic diversity of T. gondii in free-range chickens in this region.Galinhas criadas ao ar livre podem ingerir oocistos de T. gondii presentes no ambiente e, com isso, albergar cepas virulentas desse parasita em diferentes tecidos, sem sinais clínicos. O isolamento de T. gondii por meio de bioensaios em camundongos e gatos, a partir de tecidos de galinhas naturalmente infectadas, tem sido descrito em vários países. Isso demonstra a importância das galinhas caipiras na epidemiologia desse parasita. O objetivo deste trabalho foi caracterizar genotipicamente isolados de T. gondii obtidos de galinhas caipiras naturalmente infectadas em uma área rural do município de Santa Maria, estado do Rio Grande do Sul, Brasil. Fragmentos de cérebro e de coração, de 12 galinhas soropositivas para T. gondii, foram processados pela técnica de digestão péptica para isolamento do parasita. Das 12 amostras submetidas a bioensaio com camundongos, nove isolados foram obtidos. A caracterização genotípica por RFLP-PCR foi realizada utilizando-se 11 marcadores genéticos: SAG1, 5'- 3'SAG2, alt.SAG2, SAG3, BTUB, GRA6, c22-8, c29-2, L358, PK1 e Apico e revelou a presença de cinco genótipos atípicos de acordo com o ToxoDB (# 11, # 55, # 64, # 140 e # 163). Os resultados mostraram uma ampla diversidade genética de T. gondii em galinhas caipiras nessa região.Fil: Camillo, G.. Universidade Federal de Santa Maria; BrasilFil: Machado, M. E. A.. Universidade Federal de Santa Maria; BrasilFil: Cadore, G.C.. Universidade Federal de Santa Maria; BrasilFil: Bräunig, P.. Universidade Federal de Santa Maria; BrasilFil: Venturini, María Cecilia. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias. Departamento de Epizootiología y Salud Pública. Laboratorio de Inmunoparasitología; ArgentinaFil: Pardini, Lais Luján. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias. Departamento de Epizootiología y Salud Pública. Laboratorio de Inmunoparasitología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Barros, L.D.. Universidade Estadual de Londrina; BrasilFil: Garcia, J.L.. Universidade Estadual de Londrina; BrasilFil: Sangioni, L.A.. Universidade Federal de Santa Maria; BrasilFil: Vogel, F.S.F.. Universidade Federal de Santa Maria; Brasi

Non-linear QCD dynamics and exclusive production in epep collisions

The exclusive processes in electron-proton ($ep$) interactions are an important tool to investigate the QCD dynamics at high energies as they are in general driven by the gluon content of proton which is strongly subject to parton saturation effects. In this paper we compute the cross sections for the exclusive vector meson production as well as the deeply virtual Compton scattering (DVCS) relying on the color dipole approach and considering the numerical solution of the Balitsky-Kovchegov equation including running coupling corrections. We show that the small-$x$ evolution given by this evolution equation is able to describe the DESY-HERA data and is relevant for the physics of the exclusive observables in future electron-proton colliders and in photoproduction processes to be measured in coherent interactions at the LHC.Comment: 6 pages, 4 figure

Extreme Ultra-Violet Spectroscopy of the Lower Solar Atmosphere During Solar Flares

The extreme ultraviolet portion of the solar spectrum contains a wealth of diagnostic tools for probing the lower solar atmosphere in response to an injection of energy, particularly during the impulsive phase of solar flares. These include temperature and density sensitive line ratios, Doppler shifted emission lines and nonthermal broadening, abundance measurements, differential emission measure profiles, and continuum temperatures and energetics, among others. In this paper I shall review some of the advances made in recent years using these techniques, focusing primarily on studies that have utilized data from Hinode/EIS and SDO/EVE, while also providing some historical background and a summary of future spectroscopic instrumentation.Comment: 34 pages, 8 figures. Submitted to Solar Physics as part of the Topical Issue on Solar and Stellar Flare