15 research outputs found
Uptake, accumulation and metabolization of the antidepressant fluoxetine by Mytilus galloprovincialis
Fluoxetine, a selective serotonin re-uptake inhibitor (SSRI) antidepressant, is among the most prescribed pharmaceutical active substances worldwide. This study aimed to assess its accumulation and metabolization in the mussel Mytillus galloprovincialis, considered an excellent sentinel species for traditional and emerging pollutants. Mussels were collected from Ria Formosa Lagoon, Portugal, and exposed to a nominal concentration of fluoxetine (75 ng L-1) for 15 days. Approximately 1 g of whole mussel soft tissues was extracted with acetonitrile:formic acid, loaded into an Oasis MCX cartridge, and fluoxetine analysed by liquid chromatography with tandem mass spectrometry (LC-MSn). After 3 days of exposure, fluoxetine was accumulated in 70% of the samples, with a mean of 2.53 ng g(-1) dry weight (d.w.) and norfluoxetine was only detected in one sample (10%), at 3.06 ng g(-1) d.w. After 7 days of exposure, the accumulation of fluoxetine and norfluoxetine increased up to 80 and 50% respectively, and their mean accumulated levels in mussel tissues were up to 4.43 and 2.85 ng g(-1) d.w., respectively. By the end of the exposure period (15 days), both compounds were detected in 100% of the samples (mean of 9.31 and 11.65 ng g(-1) d.w., respectively). Statistical analysis revealed significant accumulation differences between the 3rd and 15th day of exposure for fluoxetine, and between the 3rd and 7th against the 15th day of exposure for norfluoxetine. These results suggest that the fluoxetine accumulated in mussel tissues is likely to be metabolised into norfluoxetine with the increase of the time of exposure, giving evidence that at these realistic environmental concentrations, toxic effects of fluoxetine in mussel tissues may occur. (C) 2016 Elsevier Ltd. All rights reserved
Modeling of the condyle elements within a biomechanical knee model
The development of a computational multibody knee model able to capture some of the fundamental properties of the human knee articulation is presented. This desideratum is reached by including the kinetics of the real knee articulation. The research question is whether an accurate modeling of the condyle contact in the knee will lead to reproduction of the complex combination of flexion/extension, abduction/adduction and tibial rotation ob-served in the real knee? The model is composed by two anatomic segments, the tibia and the femur, whose characteristics are functions of the geometric and anatomic properties of the real bones. The biomechanical model characterization is developed under the framework of multibody systems methodologies using Cartesian coordinates. The type of approach used in the proposed knee model is the joint surface contact conditions between ellipsoids, represent-ing the two femoral condyles, and points, representing the tibial plateau and the menisci. These elements are closely fitted to the actual knee geometry. This task is undertaken by con-sidering a parameter optimization process to replicate experimental data published in the lit-erature, namely that by Lafortune and his co-workers in 1992. Then, kinematic data in the form of flexion/extension patterns are imposed on the model corresponding to the stance phase of the human gait. From the results obtained, by performing several computational simulations, it can be observed that the knee model approximates the average secondary mo-tion patterns observed in the literature. Because the literature reports considerable inter-individual differences in the secondary motion patterns, the knee model presented here is also used to check whether it is possible to reproduce the observed differences with reasonable variations of bone shape parameters. This task is accomplished by a parameter study, in which the main variables that define the geometry of condyles are taken into account. It was observed that the data reveal a difference in secondary kinematics of the knee in flexion ver-sus extension. The likely explanation for this fact is the elastic component of the secondary motions created by the combination of joint forces and soft tissue deformations. The proposed knee model is, therefore, used to investigate whether this observed behavior can be explained by reasonable elastic deformations of the points representing the menisci in the model.Fundação para a Ciência e a Tecnologia (FCT) - PROPAFE – Design and Development of a Patello-Femoral Prosthesis (PTDC/EME-PME/67687/2006), DACHOR - Multibody Dynamics
and Control of Hybrid Active Orthoses MIT-Pt/BSHHMS/0042/2008, BIOJOINTS -
Development of advanced biological joint models for human locomotion biomechanics
(PTDC/EME-PME/099764/2008)
Development of a planar multi-body model of the human knee joint
The aim of this work is to develop a dynamic model for the biological human knee joint. The model is formulated in the framework of multibody systems methodologies, as a system of two bodies, the femur and the tibia. For the purpose of describing the formulation, the relative motion of the tibia with respect to the femur is considered. Due to their higher stiffness compared to that of the articular cartilages, the femur and tibia are considered as rigid bodies. The femur and tibia cartilages are considered to be deformable structures with specific material characteristics. The rotation and gliding motions of the tibia relative to the femur can not be modeled with any conventional kinematic joint, but rather in terms of the action of the knee ligaments and potential contact between the bones. Based on medical imaging techniques, the femur and tibia profiles in the sagittal plane are extracted and used to define the interface geometric conditions for contact. When a contact is detected, a continuous non-linear contact force law is applied which calculates the contact forces developed at the interface as a function of the relative indentation between the two bodies. The four basic cruciate and collateral ligaments present in the knee are also taken into account in the proposed knee joint model, which are modeled as non-linear elastic springs. The forces produced in the ligaments, together with the contact forces, are introduced into the system’s equations of motion as external forces. In addition, an external force is applied on the center of mass of the tibia, in order to actuate the system mimicking a normal gait motion. Finally, numerical results obtained from computational simulations are used to address the assumptions and procedures adopted in this study.Fundação para a Ciência e a Tecnologia (FCT
Estado da arte das pesquisas sobre currículo em cursos de formação de de profissionais da área da saúde: um levantamento a partir de artigos publicados entre 2005 e 2011
The tadpole of Proceratophrys izecksohni (Amphibia: Anura: Odontophrynidae)
We describe the external morphology of the tadpole of Proceratophrys izecksohni Dias, Amaro, Carvalho-e-Silva & Rodrigues, 2013, its internal oral features, and chondrocranial anatomy, based on specimens collected at the type locality. The tadpole has short and oval body, spiracle with inner wall fused to the body, and oral formula 2/3(1). The oral cavity of P. izecksohni is typical of stream-dwelling tadpoles, with several papillae and pustulations. The chondrocranium is longer than wide and the suprarostral corpora are free ventromedially. The palatoquadrate has a well developed processus pseudopterygoideus. We also compare the tadpole of P. izecksohni with tadpoles those of other species of the genus, emphasizing the usage of larval morphology to assist in the systematic of the genus
An Integrated Differentiation-Projection Approach for the Kinematic Data Consistency of Biomechanical Systems
Effects of aerobic exercise training on heart rate variability during wakefulness and sleep and cardiorespiratory responses of young and middle-aged healthy men
The purpose of the present study was to evaluate the effects of aerobic physical training (APT) on heart rate variability (HRV) and cardiorespiratory responses at peak condition and ventilatory anaerobic threshold. Ten young (Y: median = 21 years) and seven middle-aged (MA = 53 years) healthy sedentary men were studied. Dynamic exercise tests were performed on a cycloergometer using a continuous ramp protocol (12 to 20 W/min) until exhaustion. A dynamic 24-h electrocardiogram was analyzed by time (TD) (standard deviation of mean R-R intervals) and frequency domain (FD) methods. The power spectral components were expressed as absolute (a) and normalized units (nu) at low (LF) and high (HF) frequencies and as the LF/HF ratio. Control (C) condition: HRV in TD (Y: 108, MA: 96 ms; P<0.05) and FD - LFa, HFa - was significantly higher in young (1030; 2589 ms²/Hz) than in middle-aged men (357; 342 ms²/Hz) only during sleep (P<0.05); post-training effects: resting bradycardia (P<0.05) in the awake condition in both groups; VO2 increased for both groups at anaerobic threshold (P<0.05), and at peak condition only in young men; HRV in TD and FD (a and nu) was not significantly changed by training in either groups. The vagal predominance during sleep is reduced with aging. The resting bradycardia induced by short-term APT in both age groups suggests that this adaptation is much more related to intrinsic alterations in sinus node than in efferent vagal-sympathetic modulation. Furthermore, the greater alterations in VO2 than in HRV may be related to short-term APT