2,031 research outputs found

    An energy-saving development initiative increases birth rate and childhood malnutrition in rural Ethiopia

    Get PDF
    Background: Evolutionary life history theory predicts that, in the absence of contraception, any enhancement of maternal condition can increase human fertility. Energetic trade-offs are likely to be resolved in favour of maximizing reproductive success rather than health or longevity. Here we find support for the hypothesis that development initiatives designed to improve maternal and child welfare may also incur costs associated with increased family sizes if they do not include a family planning component. Methods and Findings: Demographic and anthropometric data were collected in a rural Ethiopian community benefiting from a recent labour-saving development technology that reduces women's energetic expenditure (n = 1,976 households). Using logistic hazards models and general linear modelling techniques, we found that whilst infant mortality has declined, the birth rate has increased, causing greater scarcity of resources within households. Conclusions: This study is, to our knowledge, the first to demonstrate a link between a technological development intervention and an increase in both birth rate and childhood malnutrition. Women's nutritional status was not improved by the energy-saving technology, because energy was diverted into higher birth rates. We argue that the contribution of biological processes to increased birth rates in areas of the developing world without access to modern contraception has been overlooked. This highlights the continued need for development programmes to be multisectoral, including access to and promotion of contraception

    Petrography of a "cryptic" mixed magma system – the Mount Waldo granite, coastal Maine

    Get PDF
    The Mount Waldo granite (MWG), dated at 371 ± 2 Ma, is typical of the younger Devonian intrusions of the coastal Maine magmatic province. It is a coarse-grained, seriate to porphyritic, biotite ± hornblende, titanite-bearing granite with abundant intermediate to felsic magmatic enclaves and less abundant mafic schlieren. The MWG contains feldspars of various textures and composition, including abundant plagioclase-mantled K-feldspar (rapakivi texture), boxy and spongy cellular plagioclase, and plagioclase that show An spikes and/or central cores of higher Ca content. In addition, the magmatic enclaves also preserve textural evidence for mixing and hybridization. Specifically, abundant mafic clots, acicular apatite, inherited megacrysts of all the feldspar varieties common in the host granite, and titanite-plagioclase intergrowths are all observed. Although very little mafic material is observed in the MWG at its present level of erosion, abundant textural evidence suggests that mixing occurred at depth in this intrusion. The thermal, chemical, and physical gradients initiated by the injection of mafic material produced not only the array of mixing textures observed in the MWG but also the large-scale convection needed to distribute these features throughout the pluton including its highest levels. RÉSUMÉ Le granite du mont Waldo (GMW), situé à 371±2 Ma, est caractéristique des intrusions récentes du Dévonien de la province magmatique côtière du Maine. Il s'agit d'un granite titanitifère à gros grain, sérié à porphyrique de biotite ± hornblende comportant une abondance d'enclaves magmatiques intermédiaires à felsiques et une abondance moindre de schlierens mafiques. Le GMW renferme des feldspaths de textures et de compositions diverses, notamment une abondance de feldspath potassique recouvert de plagioclase (texture de rapakiwi), de plagioclase alvéolaire massif et spongieux, et de plagioclase présentant des pics d'An ou des noyaux centraux à teneur supérieure en Ca. De plus, les enclaves magmatiques préservent également une preuve texturale de mélange et d'hybridation. On peut, plus précisément observer la totalité de ces traits : une abondance de grumeaux mafiques, de l'apatite aciculaire, des mégacristaux provenant de tous les types de feldspaths courants dans le granite hôte et des enchevêtrements de titanite-plagioclase. Même si l'on observe très peu de matières mafiques dans le GMW à son niveau actuel d'érosion, d'abondants indices texturaux permettent de supposer que le mixage est survenu en profondeur dans cette intrusion. Les gradients thermiques, chimiques et physiques obtenus par l'injection de matières mafiques a non seulement produit l'éventail de textures de mélange observé dans le GMW, mais également la convection à grande échelle nécessaire à la distribution de ces caractéristiques dans l'ensemble du pluton ainsi qu'à ses niveaux les plus élevés. [Traduit par la rédaction

    Efficient digital-to-analog encoding

    Full text link

    A higher order control volume based finite element method to prodict the deformation of heterogeneous materials

    Get PDF
    Materials with obvious internal structure can exhibit behaviour, under loading, that cannot be described by classical elasticity. It is therefore important to develop computational tools incorporating appropriate constitutive theories that can capture their unconventional behaviour. One such theory is micropolar elasticity. This paper presents a linear strain control volume finite element formulation incorporating micropolar elasticity. Verification results from a micropolar element patch test as well as convergence results for a stress concentration problem are included. The element will be shown to pass the patch test and also exhibit accuracy that is at least equivalent to its finite element counterpart

    Tuning out vibrational levels in molecular electron energy-loss spectra

    Get PDF
    The phenomenon whereby features associated with certain vibrational levels in molecular states of mixed electronic character disappear under specific scattering conditions in electron energy-loss spectra is investigated. In particular, using a combination of experimental measurements and coupled-channel calculations, anomalous vibrational intensities in the mixed valence-Rydberg 1Π u←X1Σg+ transition of N 2 are explained. A single parameter, i.e., the ratio of the generalized electronic transition moments to the diabatic valence and Rydberg components of the mixed states, dependent on the experimental scattering conditions, is found to be essentially capable of describing all observed relative vibrational intensities, including the near disappearance of the b1Π u(v=5) feature for momentum-transfer-squared values K2 ≈ 0.3 a.u. This result highlights the interesting possibility of experimental control of molecular quantum-interference effects in electron energy-loss spectra, something that is not possible in optical spectra

    The influence of void size on the micropolar constitutive properties of model heterogeneous materials

    Get PDF
    In this paper the mechanical behaviour of model heterogeneous materials consisting of regular periodic arrays of circular voids within a polymeric matrix is investigated. Circular ring samples of the materials were fabricated by machining the voids into commercially available polymer sheet. Ring samples of differing sizes but similar geometries were loaded using mechanical testing equipment. Sample stiffness was found to depend on sample size with stiffness increasing as size reduced. The periodic nature of the void arrays also facilitated detailed finite element analysis of each sample. The results obtained by analysis substantiate the observed dependence of stiffness on size. Classical elasticity theory does not acknowledge this size effect but more generalized elasticity theories do predict it. Micropolar elasticity theory has therefore been used to interpret the sample stiffness data and identify constitutive properties. Modulus values for the model materials have been quantified. Values of two additional constitutive properties, the characteristic length and the coupling number, which are present within micropolar elasticity but absent from its classic counterpart have also been determined. The dependence of these additional properties on void size has been investigated and characteristic length values compared to the length scales inherent within the structure of the model materials

    A study of the nanostructure and hardness of electron beam evaporated TiAlBN coatings

    Get PDF
    TiAlBN coatings have been deposited by electron beam (EB) evaporation from a single TiAlBN material source onto AISI 316 stainless steel substrates at a temperature of 450 °C and substrate bias of − 100 V. The stoichiometry and nanostructure have been studied by X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron microscopy. The hardness and elastic modulus were determined by nanoindentation. Five coatings have been deposited, three from hot-pressed TiAlBN material and two from hot isostatically pressed (HIPped) material. The coatings deposited from the hot-pressed material exhibited a nanocomposite nc-(Ti,Al)N/a-BN/a-(Ti,Al)B2 structure, the relative phase fraction being consistent with that predicted by the equilibrium Ti–B–N phase diagram. Nanoindentation hardness values were in the range of 22 to 32 GPa. Using the HIPped material, coating (Ti,Al)B0.29N0.46 was found to have a phase composition of 72–79 mol.% nc-(Ti,Al)(N,B)1 − x+ 21–28 mol.% amorphous titanium boride and a hardness of 32 GPa. The second coating, (Ti,Al)B0.66N0.25, was X-ray amorphous with a nitride+boride multiphase composition and a hardness of 26 GPa. The nanostructure and structure–property relationships of all coatings are discussed in detail. Comparisons are made between the single-EB coatings deposited in this work and previously deposited twin-EB coatings. Twin-EB deposition gives rise to lower adatom mobilities, leading to (111) (Ti,Al)N preferential orientation, smaller grain sizes, less dense coatings and lower hardnesses

    Against `Realism'

    Get PDF
    We examine the prevalent use of the phrase ``local realism'' in the context of Bell's Theorem and associated experiments, with a focus on the question: what exactly is the ``realism'' in ``local realism'' supposed to mean? Carefully surveying several possible meanings, we argue that all of them are flawed in one way or another as attempts to point out a second premise (in addition to locality) on which the Bell inequalities rest, and (hence) which might be rejected in the face of empirical data violating the inequalities. We thus suggest that this vague and abused phrase ``local realism'' should be banned from future discussions of these issues, and urge physicists to revisit the foundational questions behind Bell's Theorem

    On P Systems as a Modelling Tool for Biological Systems

    Get PDF
    We introduce a variant of P systems where rules have associated a real number providing a measure for the “intrinsic reactivity”of the rule and roughly corresponding to the kinetic coefficient which, in bio-chemistry, is usually associated to each molecular reaction. The behaviour of these P systems is then defined according to a strategy which, in each step, randomly selects the next rule to be applied depending upon a certain distribution of probabilities. As an application, we present a P system model of the quorum sensing regulatory networks of the bacterium Vibrio Fischeri. In this respect, a formalisation of the network in terms of P systems is provided and some simulation results concerning the behaviour of a colony of such bacteria are reported. We also briefly describe the implementation techniques adopted by pointing out the generality of our approach which appears to be fairly independent from the particular choice of P system variant and the language used to implement it.Ministerio de Ciencia y Tecnología TIC2002-04220-C03-0

    Progressive transformation of a flux rope to an ICME

    Full text link
    The solar wind conditions at one astronomical unit (AU) can be strongly disturbed by the interplanetary coronal mass ejections (ICMEs). A subset, called magnetic clouds (MCs), is formed by twisted flux ropes that transport an important amount of magnetic flux and helicity which is released in CMEs. At 1 AU from the Sun, the magnetic structure of MCs is generally modeled neglecting their expansion during the spacecraft crossing. However, in some cases, MCs present a significant expansion. We present here an analysis of the huge and significantly expanding MC observed by the Wind spacecraft during 9 and 10 November, 2004. After determining an approximated orientation for the flux rope using the minimum variance method, we precise the orientation of the cloud axis relating its front and rear magnetic discontinuities using a direct method. This method takes into account the conservation of the azimuthal magnetic flux between the in- and out-bound branches, and is valid for a finite impact parameter (i.e., not necessarily a small distance between the spacecraft trajectory and the cloud axis). Moreover, using the direct method, we find that the ICME is formed by a flux rope (MC) followed by an extended coherent magnetic region. These observations are interpreted considering the existence of a previous larger flux rope, which partially reconnected with its environment in the front. These findings imply that the ejected flux rope is progressively peeled by reconnection and transformed to the observed ICME (with a remnant flux rope in the front part).Comment: Solar Physics (in press
    corecore