Crossover of interface growth dynamics during corrosion and passivation

We study a model of corrosion and passivation of a metalic surface in contact with a solution using scaling arguments and simulation. The passive layer is porous so that the metal surface is in contact with the solution. The volume excess of the products may suppress the access of the solution to the metal surface, but it is then restored by a diffusion mechanism. A metalic site in contact with the solution or with the porous layer can be passivated with rate p and volume excess diffuses with rate D. At small times, the corrosion front linearly grows in time, but the growth velocity shows a t^{-1/2} decrease after a crossover time of order t_c ~ D/p^2, where the average front height is of order h_c ~ D/p. A universal scaling relation between h/h_c and t/t_c is proposed and confirmed by simulation for 0.00005 <= p <= 0.5 in square lattices. The roughness of the corrosion front shows a crossover from Kardar-Parisi-Zhang scaling to Laplacian growth (diffusion-limited erosion - DLE) at t_c. The amplitudes of roughness scaling are obtained by the same kind of arguments as previously applied to other competitive growth models. The simulation results confirm their validity. Since the proposed model captures the essential ingredients of different corrosion processes, we also expect these universal features to appear in real systems.Comment: 17 pages, including 7 figures; submitted articl

Pitting Corrosion in Austenitic Stainless Steel Water Tanks of Hotel Trains

The water storage tanks of hotel trains suffered pitting corrosion. To identify the cause, the tanks were subjected to a detailed metallographic study and the chemical composition of the austenitic stainless steels used in their construction was determined. Both the tank water and the corrosion products were further examined by physicochemical and microbiological testing. Corrosion was shown to be related to an incompatibility between the chloride content of the water and the base and filler metals of the tanks. These findings formed the basis of recommendations aimed at the prevention and control of corrosion in such tanks. Se han detectado problemas de corrosión por picaduras en los depósitos de agua de trenes hotel. Para identificar las causas se llevó a cabo un detallado estudio metalográfico así como de la composición química de los aceros inoxidables austeníticos utilizados en su construcción. También se realizaron estudios fisicoquímicos y microbiológicos de los productos de corrosión. Se ha encontrado que los problemas de corrosión están relacionados con la incompatibilidad entre el contenido en cloruros del agua y los metales base y de aporte de la soldadura de los tanques. En base a estos hallazgos se proponen una serie de recomendaciones encaminadas a la prevención y control de la corrosión de dichos depósitos

Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy

In this work, the corrosion behaviors of friction-stir lap welding of 6061-T6 Al-alloy are studied. The friction-stir lap welding was performed under different welding conditions (rotation speed and welding speed). The corrosion behavior of the parent alloy, the weld nugget zone (WNZ), and the heat affected zone (HAZ) of each welded sample working as an electrode, were investigated by the Tafel polarization test in 3.5 wt. (%) NaCl at ambient temperature. The morphology of the corroded surface of each region was analyzed by scanning electron microscopy together with energy dispersive spectroscopy (SEM-EDS). The results showed that the corrosion resistance of the parent alloy was better than the WNZ and the HAZ in both welding conditions. Localized pit dissolution and intergranular corrosion were the dominant corrosion types observed in the parent alloy, WNZ, and HAZ. The parent alloy, WNZ, and HAZ exhibited similar corrosion potentials (Ecorr) after T6 heat treatment. This treatment had a better effect on the corrosion resistance of the welded regions than the parent alloy

Prioritization of Epilepsy Associated Candidate Genes by Convergent Analysis

Epilepsy is a severe neurological disorder affecting a large number of individuals, yet the underlying genetic risk factors for epilepsy remain unclear. Recent studies have revealed several recurrent copy number variations (CNVs) that are more likely to be associated with epilepsy. The responsible gene(s) within these regions have yet to be definitively linked to the disorder, and the implications of their interactions are not fully understood. Identification of these genes may contribute to a better pathological understanding of epilepsy, and serve to implicate novel therapeutic targets for further research.In this study, we examined genes within heterozygous deletion regions identified in a recent large-scale study, encompassing a diverse spectrum of epileptic syndromes. By integrating additional protein-protein interaction data, we constructed subnetworks for these CNV-region genes and also those previously studied for epilepsy. We observed 20 genes common to both networks, primarily concentrated within a small molecular network populated by GABA receptor, BDNF/MAPK signaling, and estrogen receptor genes. From among the hundreds of genes in the initial networks, these were designated by convergent evidence for their likely association with epilepsy. Importantly, the identified molecular network was found to contain complex interrelationships, providing further insight into epilepsy's underlying pathology. We further performed pathway enrichment and crosstalk analysis and revealed a functional map which indicates the significant enrichment of closely related neurological, immune, and kinase regulatory pathways.The convergent framework we proposed here provides a unique and powerful approach to screening and identifying promising disease genes out of typically hundreds to thousands of genes in disease-related CNV-regions. Our network and pathway analysis provides important implications for the underlying molecular mechanisms for epilepsy. The strategy can be applied for the study of other complex diseases

Comparative functional genomics of the fission yeasts

The fission yeast clade--comprising Schizosaccharomyces pombe, S. octosporus, S. cryophilus, and S. japonicus--occupies the basal branch of Ascomycete fungi and is an important model of eukaryote biology. A comparative annotation of these genomes identified a near extinction of transposons and the associated innovation of transposon-free centromeres. Expression analysis established that meiotic genes are subject to antisense transcription during vegetative growth, which suggests a mechanism for their tight regulation. In addition, trans-acting regulators control new genes within the context of expanded functional modules for meiosis and stress response. Differences in gene content and regulation also explain why, unlike the budding yeast of Saccharomycotina, fission yeasts cannot use ethanol as a primary carbon source. These analyses elucidate the genome structure and gene regulation of fission yeast and provide tools for investigation across the Schizosaccharomyces clade