Modelling the mechanical behaviour of metal powder during Die compaction process

In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS finite element (FEM) code by using the subroutine USERMAT. Some simulations were performed to validate the proposed metal powder material model. The interaction between metal powder and die walls was considered by means of contact elements. In addition to the analysis of metal powder behaviour during compaction, the actions transmitted to die were also investigated, by considering different friction coefficients. This information is particularly useful for a correct die design

Long-term economic decline and non-mainstream voting

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal

Seismic vulnerability of Santa Maria Novella Basilica in Florence

This paper presents the evaluation of the seismic vulnerability of Santa Maria Novella Basilica in Florence. Santa Maria Novella is one of the most important historical churches in Italy and, for this reason, different studies on the structural behavior of this monument were conducted during the last decades. Particularly, this work is focused on the dynamic behavior of the church. Mechanical properties of masonries were determined through "in situ" and laboratory tests, according to the National Italian Code (Norme Tecniche per le Costruzioni, 2018). An eigenvalue analysis on a finite element model of the Basilica was performed to obtain the fundamental vibration mode shapes.Finally, to evaluate the seismic risk index in terms of ratio between the minimum peak ground acceleration which leads to the first collapse of a structural element and the design peak ground acceleration, a response spectrum analysis was carried out to evaluate the stress fields in both columns and walls

Thermal–Mechanical FEM Analyses of a Liquid Rocket Engines Thrust Chamber

The Italian Ministry of University and Research (MIUR) funded the HYPROB Program to develop regeneratively cooled liquid rocket engines. In this type of engine, liquid propellant oxygen–methane is used, allowing us to reach very good performances in terms of high vacuum specific impulse and high thrust-to-weight ratio. The present study focused on the HYPROB final ground demonstrator, which will be able to produce a 30 kN thrust in flight conditions. In order to achieve such a thrust level, very high chamber pressures (up to 50 bar) and consequently high thermal fluxes and gradients are expected inside the thrust chamber. Very complex and high-fidelity numerical FEM models were adopted here to accurately simulate the thermal–mechanical behavior of the thrust chamber cooling channels, accounting for plasticity, creep, and low-cycle fatigue (LCF) phenomena. The aim of the current work was to investigate the main failure phenomena that could occur during the thrust chamber’s service life. Results demonstrated that LCF is the main cause of failure. The corresponding number of loading cycles to failure were calculated accordingly

Responses to stress: Investigating the role of gender, social relationships, and touch avoidance in italy

Stress is a physiological response to internal and external events we call “stressors”. Response to the same daily stressors varies across individuals and seems to be higher for women. A possible explanation for this phenomenon is that women perceive sociality, relationships, and intimacy— important sources of both stress and wellbeing—differently from how men experience them. In this study, we investigate how gender, attachment, and touch avoidance predict stress responses on a sample of 335 Italians (216 females; age = 35.82 ± 14.32). Moreover, we analyze the network of relationships between these variables through multiple linear regression and exploratory network analysis techniques. The results recontextualize the role of gender in determining stress responses in terms of (lack of) confidence and touch avoidance toward family members; attitudes toward relationships seem to be the main determinants of stress responses. These results have implications for reducing stress in both clinical settings and at a social level

Stress Relaxation Behavior of Additively Manufactured Polylactic Acid (PLA)

In this work, the stress relaxation behavior of 3D printed PLA was experimentally investigated and analytically modeled. First, a quasi-static tensile characterization of additively manufactured samples was conducted by considering the effect of printing parameters like the material infill orientation and the outer wall presence. The effect of two thermal conditioning treatments on the material tensile properties was also investigated. Successively, stress relaxation tests were conducted, on both treated and unconditioned specimens, undergoing three different strains levels. Analytical predictive models of the viscous behavior of additive manufactured material were compared, highlighting and discussing the effects of considered printing parameters

Coupled FEM-DBEM Simulation of 3D Crack Growth under Fatigue Load Spectrum

Abstract Numerical predictions of fatigue crack growth under load spectrum are obtained by coupled FEM-DBEM approach. An initial part-through corner crack, in a pre-notched specimen undergoing a traction fatigue load, propagates becoming through the thickness. A two parameter crack growth law ("Unified Approach") is calibrated by in house made constant amplitude experimental tests and the crack growth retardation after an overload application is reproduced. The residual stresses responsible for such retardation are calculated by a sequence of elastic-plastic static FEM analysis; such stresses are then applied to the crack faces for the propagation simulation in a DBEM environment. A satisfactory agreement between numerical and experimental crack growth rates are displayed, for both part-through crack and through the thickness crack. This approach provide general modeling capabilities, with allowance for general crack front shape and fully automatic propagation

Interleukin-6 and granulocyte macrophage-CSF in the cerebrospinal fluid from HIV infected subjects with involvement of the central nervous system.

We detected the cytokines interleukin-6 (IL-6) and granulocyte macrophage-CSF (GM-CSF) by ELISA in the CSF and serum of 30 HIV-infected patients classified as AIDS dementia complex (ADC), and 20 subjects with other neurological diseases (OND). We have found a high incidence of detectable IL-6 and GM-CSF in the CSF of ADC patients compared with OND patients. No statistical differences were observed between both groups for serum IL-6 and GM-CSF levels. These results suggest an intrathecal synthesis of these cytokines and a possible involvement in the pathogenesis of ADC

Experimental evaluation of the long-term creep deformations of epoxy resin

Abstract Adhesively bonded structures are widely used in many engineering fields for new structures and strengthening of existing ones. The failure of these joints are in some cases caused by long-term deformations. In this paper, an in house made experimental setup for investigating the creep behavior of epoxy resin specimens is presented. The test equipment consists of both conventional apparatus and a non-contact optical technique, Digital Image Correlation (DIC). Several tests were performed at different temperatures and the corresponding results were used for creep master curve construction by means of time-temperature superposition principle (TTSP)

The dissociation of carbon monoxide from hemoglobin intermediate.

To investigate the mechanism of allosteric switching in human hemoglobin, we have studied the dissociation of the ligand (CO) from several intermediate ligation states by a stopped-flow kinetic technique that utilizes competitive binding of CO by microperoxidase. The hemoglobin species investigated include Hb(CO)4, the diliganded symmetrical species (alpha beta-CO)2 and (alpha-CO beta)2, and the di- and monoliganded asymmetrical species (alpha-CO beta-CO)(alpha beta), (alpha-CO beta)(alpha beta-CO), (alpha beta-CO) (alpha beta), and (alpha-CO beta)(alpha beta). They were obtained by rapid reduction with dithionite of the corresponding valence intermediates that in turn were obtained by chromatography or by hybridization. The nature and concentration of the intermediates were determined by isoelectric focusing at −25 degrees C. The study was performed at varying hemoglobin concentrations (0.1, 0.02, and 0.001 mM [heme]), pH (6.0, 7.0, 8.0), with and without inositol hexaphosphate. The results indicate that: (a) hemoglobin concentration in the 0.1-0.02 mM range does not significantly affect the kinetic rates; (b) the alpha chains dissociate CO faster than the beta chains; (c) the symmetrical diliganded intermediates show cooperativity with respect to ligand dissociation that disappears in the presence of inositol hexaphosphate; (d) the monoliganded intermediates dissociate CO faster than the diliganded intermediates; (e) the asymmetrical diliganded intermediates are functionally different from the symmetrical species