The nature of chlorine-inhibition of photocatalytic degradation of dichloroacetic acid in a TiO2-based microreactor

Photocatalytic degradation of dichloroacetic acid (DCA) was studied in a continuous-flow set-up using a titanium microreactor with an immobilized double-layered TiO2 nanoparticle/nanotube film. Chloride ions, formed during the degradation process, negatively affect the photocatalytic efficiency and at a certain concentration (approximately 0.5 mM) completely stop the reaction in the microreactor. Two proposed mechanisms of inhibition with chloride ions, competitive adsorption and photogenerated-hole scavenging, have been proposed and investigated by adsorption isotherms and electron paramagnetic resonance (EPR) measurements. The results show that chloride ions block the DCA adsorption sites on the titania surface and reduce the amount of adsorbed DCA molecules. The scavenging effect of chloride ions during photocatalysis through the formation of chlorine radicals was not detected.Slovenian Research Agency/P2-0084Slovenian Research Agency/J2-4309Slovene Human Resources Development and Scholarship Fund/Ad Futur

MILOPrOductIOn Of vIabLe Miscanthus gigantheus rhIzOMes at fertILe and degraded sOIL

abstract ArAndjelovic, M., G. drAzic, j. MilovAnovic and S. AlekSic, 2014. Miloproduction of viable Miscanthus gigantheus rhizomes at fertile and degraded soil. Bulg. J. Agric. Sci., 20: 1189-1194 expanding supplies of home grown biomass and facilitation of the development and competitiveness of a supply chain in an sustainable manner, presents a core of government's strategy, for energy development in republic of Serbia. Growing agroenergy corps may be one of the solutions according to analysis that were carried out. one of these corps that was found to be especially amenable due to its potentially high productivity and cultivation on degraded terrain is Miscanthus giganteus. The possibility of producing after mentioned plant for the biomass supply chain, at very low cost is the main aim of this study. due to its sterility Miscanthus giganteus can only by propagated by vegetative division. Potential of production of viable rhizome on terrains with different rate of fertility was followed by method of experiments on the field. 6 parameters that were following growth of the rhizome and planting survival rate were monitored. According to the results, main factors that affect production of viable rhizomes are age of mother plants, and biotic effects of weed vegetation. Size of rhizomes and nursery fertilization shoved significantly smaller effect. This study concentrates on available data regarding the potential directions by which Miscanthus material could achieve maximum production, by high density planting

Barrier properties, migration into the food simulants and antimicrobial activity of paper-based materials with functionalized surface

The study investigates four paper-based materials designed for short-time wrapping of meat products by determining morpho-structure, capillary-hydroscopic, barrier and antibacterial properties, wettability and migration into food simulants. The paper-based materials are coded as RO, SP, IT and SLO. RO and SLO samples exhibit the best barrier properties against water vapors. The low solubility and contact angles of RO, IT and SLO in A simulant (distilled water) make them suitable for aqueous food storage. The extremely high solubility of SP and SLO in simulant B (acetic acid) shows that wax and hydrophobized starch, respectively are carried by the acidic media, thus these agents are unlikely to coat the paper designed to package acidic food. SLO inhibits E. coli, Salmonella enterica, Lysteria monocytogenes, Pseudomonas aeruginosa and fluorescens. Polyethylene coated on RO and IT surface and wax impregnated on SP have a lower antimicrobial activity in comparison with hydrophobized starch coated on SLO

Results of international standardised beekeeper surveys of colony losses for winter 2012-2013 : analysis of winter loss rates and mixed effects modelling of risk factors for winter loss.

This article presents results of an analysis of winter losses of honey bee colonies from 19 mainly European countries, most of which implemented the standardised 2013 COLOSS questionnaire. Generalised linear mixed effects models (GLMMs) were used to investigate the effects of several factors on the risk of colony loss, including different treatments for Varroa destructor, allowing for random effects of beekeeper and region. Both winter and summer treatments were considered, and the most common combinations of treatment and timing were used to define treatment factor levels. Overall and within country colony loss rates are presented. Significant factors in the model were found to be: percentage of young queens in the colonies before winter, extent of queen problems in summer, treatment of the varroa mite, and access by foraging honey bees to oilseed rape and maize. Spatial variation at the beekeeper level is shown across geographical regions using random effects from the fitted models, both before and after allowing for the effect of the significant terms in the model. This spatial variation is considerable

Managed honey bee colony losses in Canada, China, Europe, Israel and Turkey, for the winters of 2008-9 and 1009-10

In 2008 the COLOSS network was formed by honey bee experts from Europe and the USA. The primary objectives set by this scientific network were to explain and to prevent large scale losses of honey bee (Apis mellifera) colonies. In June 2008 COLOSS obtained four years support from the European Union from COST and was designated as COST Action FA0803 – COLOSS (Prevention of honey bee COlony LOSSes). To enable the comparison of loss data between participating countries, a standardized COLOSS questionnaire was developed. Using this questionnaire information on honey bee losses has been collected over two years. Survey data presented in this study were gathered in 2009 from 12 countries and in 2010 from 24 countries. Mean honey bee losses in Europe varied widely, between 7-22% over the 2008-9 winter and between 7-30% over the 2009-10 winter. An important finding is that for all countries which participated in 2008-9, winter losses in 2009-10 were found to be substantially higher. In 2009-10, winter losses in South East Europe were at such a low level that the factors causing the losses in other parts of Europe were absent, or at a level which did not affect colony survival. The five provinces of China, which were included in 2009-10, showed very low mean (4%) A. mellifera winter losses. In six Canadian provinces, mean winter losses in 2010 varied between 16-25%, losses in Nova Scotia (40%) being exceptionally high. In most countries and in both monitoring years, hobbyist beekeepers (1-50 colonies) experienced higher losses than practitioners with intermediate beekeeping operations (51-500 colonies). This relationship between scale of beekeeping and extent of losses effect was also observed in 2009-10, but was less pronounced. In Belgium, Italy, the Netherlands and Poland, 2008-9 mean winter losses for beekeepers who reported ‘disappeared’ colonies were significantly higher compared to mean winter losses of beekeepers who did not report ‘disappeared’ colonies. Mean 2008-9 winter losses for those beekeepers in the Netherlands who reported symptoms similar to “Colony Collapse Disorder” (CCD), namely: 1. no dead bees in or surrounding the hive while; 2. capped brood was present, were significantly higher than mean winter losses for those beekeepers who reported ‘disappeared’ colonies without the presence of capped brood in the empty hives. In the winter of 2009-10 in the majority of participating countries, beekeepers who reported ‘disappeared’ colonies experienced higher winter losses compared with beekeepers, who experienced winter losses but did not report ‘disappeared’ colonies

Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments

Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor

Evaluation of Suppressed Mite Reproduction (SMR) Reveals Potential for Varroa Resistance in European Honey Bees (Apis melliferaL.)

Simple Summary The miteVarroa destructorrepresents a great threat to honey bees and the beekeeping industry. The opportunity to select and breed honey bees that are naturally able to fight the mite stands a sustainable solution. This can be achieved by evaluation of the failure of mite reproduction (SMR, suppressed mite reproduction). We conducted a large European experiment to assess the SMR trait in different populations of honey bees spread over 13 different countries, and representing different honey bee populations. The first goal was to standardize and validate the SMR evaluation method, and then to compare the SMR trait between the different populations. Our results indicate that it is necessary to examine at least 35 brood cells infested by a single mite to reliably estimate the SMR score of any given colony. Several colonies from our dataset display high SMR scores, indicating that this trait is present within the European honey bee populations. No major differences could be identified between countries for a given population, or between populations in different countries. This study shows the potential to increase selection efforts to breedV. destructorhoney bee resistant populations. In the fight against theVarroa destructormite, selective breeding of honey bee (Apis melliferaL.) populations that are resistant to the parasitic mite stands as a sustainable solution. Selection initiatives indicate that using the suppressed mite reproduction (SMR) trait as a selection criterion is a suitable tool to breed such resistant bee populations. We conducted a large European experiment to evaluate the SMR trait in different populations of honey bees spread over 13 different countries, and representing different honey bee genotypes with their local mite parasites. The first goal was to standardize and validate the SMR evaluation method, and then to compare the SMR trait between the different populations. Simulation results indicate that it is necessary to examine at least 35 single-infested cells to reliably estimate the SMR score of any given colony. Several colonies from our dataset display high SMR scores indicating that this trait is present within the European honey bee populations. The trait is highly variable between colonies and some countries, but no major differences could be identified between countries for a given genotype, or between genotypes in different countries. This study shows the potential to increase selective breeding efforts ofV. destructorresistant populations

Multicenter evaluation of blood-based biomarkers for the detection of endometriosis and adenomyosis: A prospective non-interventional study.

OBJECTIVE To evaluate blood-based biomarkers to detect endometriosis and/or adenomyosis across nine European centers (June 2014-April 2018). METHODS This prospective, non-interventional study assessed the diagnostic accuracy of 54 blood-based biomarker immunoassays in samples from 919 women (aged 18-45 years) with suspicion of endometriosis and/or adenomyosis versus symptomatic controls. Endometriosis was stratified by revised American Society for Reproductive Medicine stage. Symptomatic controls were "pathologic symptomatic controls" or "pathology-free symptomatic controls". The main outcome measure was receiver operating characteristic-area under the curve (ROC-AUC) and Wilcoxon P values corrected for multiple testing (q values). RESULTS CA-125 performed best in "all endometriosis cases" versus "all symptomatic controls" (AUC 0.645, 95% confidence interval [CI] 0.600-0.690, q < 0.001) and increased (P < 0.001) with disease stage. In "all endometriosis cases" versus "pathology-free symptomatic controls", S100-A12 performed best (AUC 0.692, 95% CI 0.614-0.769, q = 0.001) followed by CA-125 (AUC 0.649, 95% CI 0.569-0.729, q = 0.021). In "adenomyosis only cases" versus "symptomatic controls" or "pathology-free symptomatic controls", respectively, the top-performing biomarkers were sFRP-4 (AUC 0.615, 95% CI 0.551-0.678, q = 0.045) and S100-A12 (AUC 0.701, 95% CI 0.611-0.792, q = 0.004). CONCLUSION This study concluded that no biomarkers tested could diagnose or rule out endometriosis/adenomyosis with high certainty