Bekkenbanden voor acute stabilisatie van instabiele bekkenfracturen

Bekkenbanden zijn ontwikkeld voor de acute behandeling van instabiele bekkenringfracturen in de prehospitale fase. Deze behandeling is gericht op het beperken van het inwendig bloedverlies door het verkleinen van het bij bekkenfracturen toegenomen bekkenvolume en het stabiliseren van de fractuurdelen. Het effect van commercieel verkrijgbare bekkenbanden op de reductie van de symphysis pubisdiastase en de hemodynamische stabiliteit is aangetoond. Het langdurig gebruik van bekkenbanden wordt ontraden wegens toegenomen risico op het ontwikkelen van decubitus. Met name langdurige immobilisatie met een bekkenband op een traumaplank dient voorkomen te worden. In dit artikel wordt een aantal verschillende bekkenbanden besproken en wordt een casus gepresenteerd.Pelvic circumferential compression devices have been developed for initial treatment of unstable pelvic ring fractures in the prehospital situation. The treatment is aimed at achieving tamponade by reducing the increased pelvic volume and reducing the bleeding from fracture surfaces. The effect of commercially available pelvic circumferential compression devices on the reduction of symphysis pubis diastasis and the resuscitation has been proved. Prolonged use of these devices is complicated by the risk of development of pressure sores. Therefore prolonged immobilization on a spine board should be avoided. A number of different pelvic binders will be discussed in this article, which also presents a case

The role of an extended medial column arthrodesis for Charcot midfoot neuroarthropathy

The etiology of diabetic Charcot neuroarthropathy involving the midfoot often includes an inciting traumatic event or repetitive micro-trauma from an uncompensated biomechanical imbalance that potentiates an incompletely understood pathway leading to a rocker-bottom foot deformity and ulceration. In the setting of a severe Charcot foot fracture and/or dislocation with obvious osseous instability, diagnostic delay can potentiate the limb-threatening sequelae of infected midfoot ulcerations in this patient population. In this article, the authors discuss the thought process as well as the advantages of performing an extended medial column arthrodesis for selected Charcot midfoot deformities

No differences in in vivo kinematics between six different types of knee prostheses

Purpose: The aim of this study was to compare a broad range of total knee prostheses with different design parameters to determine whether in vivo kinematics was consistently related to design. The hypothesis was that there are no clear recognizable differences in in vivo kinematics between different design parameters or prostheses. Methods: At two sites, data were collected by a single observer on 52 knees (49 subjects with rheumatoid arthritis or osteoarthritis). Six different total knee prostheses were used: multi-radius, single-radius, fixed-bearing, mobilebearing, posterior-stabilized, cruciate retaining and cruciate sacrificing. Knee kinematics was recorded using fluoroscopy as the patients performed a step-up motion. Results: There was a significant effect of prosthetic design on all outcome parameters; however, post hoc tests showed that the NexGen group was responsible for 80% of the significant values. The range of knee flexion was much smaller in this group, resulting in smaller anterior-posterior translations and rotations. Conclusion: Despite kinematics being generally consistent with the kinematics intended by their design, there were no clear recognizable differences in in vivo kinematics between different design parameters or prostheses. Hence, the differences in design parameters or prostheses are not distinct enough to have an effect on clinical outcome of patients.Biomechanical EngineeringMechanical, Maritime and Materials Engineerin

Biomechanical comparison of screw-based zoning of PHILOS and Fx proximal humerus plates

Background Treatment of proximal humerus fractures with locking plates is associated with complications. We aimed to compare the biomechanical effects of removing screws and blade of a fixed angle locking plate and hybrid blade plate, on a two-part fracture model. Methods Forty-five synthetic humeri were divided into nine groups where four were implanted with a hybrid blade plate and the remaining with locking plate, to treat a two-part surgical neck fracture. Plates’ head screws and blades were divided into zones based on their distance from fracture site. Two groups acted as a control for each plate and the remaining seven had either a vacant zone or blade swapped with screws. For elastic cantilever bending, humeral head was fixed and the shaft was displaced 5 mm in extension, flexion, valgus and varus direction. Specimens were further loaded in varus direction to investigate their plastic behaviour. Results In both plates, removal of inferomedial screws or blade led to a significantly larger drop in varus construct stiffness than other zones. In blade plate, insertion of screws in place of blade significantly increased the mean extension, flexion valgus and varus bending stiffness (24.458%/16.623%/19.493%/14.137%). In locking plate, removal of screw zones proximal to the inferomedial screws reduced extension and flexion bending stiffness by 26–33%. Conclusions Although medial support improved varus stability, two inferomedial screws were more effective than blade. Proximal screws are important for extension and flexion. Mechanical consequences of screw removal should be considered when deciding the number and choice of screws and blade in clinic

Parametric design optimisation of proximal humerus plates based on finite element method

Optimal treatment of proximal humerus fractures remains controversial. Locking plates offer theoretical advantages but are associated with complications in the clinic. This study aimed to perform parametric design optimisation of proximal humerus plates to enhance their mechanical performance. A finite element (FE) model was developed that simulated a two-part proximal humerus fracture that had been treated with a Spatial Subchondral Support (S3) plate and subjected to varus bending. The FE model was validated against in vitro biomechanical test results. The predicted load required to apply 5 mm cantilever varus bending was only 0.728% lower. The FE model was then used to conduct a parametric optimisation study to determine the orientations of inferomedial plate screws that would yield minimum fracture gap change (i.e. optimal stability). The feasible design space was automatically identified by imposing clinically relevant constraints, and the creation process of each FE model for the design optimisation was automated. Consequently, 538 FE models were generated, from which the obtained optimal model had 4.686% lower fracture gap change (0.156 mm) than that of the manufacturer’s standard plate. Whereas its screws were oriented towards the inferomedial region and within the range of neck-shaft angle of a healthy subject. The methodology presented in this study promises future applications in patient-specific design optimisation of implants for other regions of the human body

Pelvic trauma : WSES classification and guidelines

Complex pelvic injuries are among the most dangerous and deadly trauma related lesions. Different classification systems exist, some are based on the mechanism of injury, some on anatomic patterns and some are focusing on the resulting instability requiring operative fixation. The optimal treatment strategy, however, should keep into consideration the hemodynamic status, the anatomic impairment of pelvic ring function and the associated injuries. The management of pelvic trauma patients aims definitively to restore the homeostasis and the normal physiopathology associated to the mechanical stability of the pelvic ring. Thus the management of pelvic trauma must be multidisciplinary and should be ultimately based on the physiology of the patient and the anatomy of the injury. This paper presents the World Society of Emergency Surgery (WSES) classification of pelvic trauma and the management Guidelines.Peer reviewe