Elaboration and properties of plasticised chitosan-based exfoliated nano-biocomposites

A series of plasticised chitosan-based materials and nanocomposites were successfully prepared by thermomechanical kneading. During the processing, the montmorillonite (MMT) platelets were fully delaminated. The nanoclay type and content and the preparation method were seen to have an impact on the crystallinity, morphology, glass transition temperature, and mechanical properties of the samples. When higher content (5%) of MMT–Na+ or either content (2.5% or 5%) of chitosan-organomodified MMT (OMMT–Ch) was used, increases in crystallinity and glass transition temperature were observed. Compared to the neat chitosan, the plasticised chitosan-based nano-biocomposites showed drastically improved mechanical properties, which can be ascribed to the excellent dispersion and exfoliation of nanoclay and the strong affinity between the nanoclay and the chitosan matrix. The best mechanical properties obtained were Young's modulus of 164.3 MPa, tensile strength of 13.9 MPa, elongation at break of 62.1%, and energy at break of 0.671 MPa. While the degree of biodegradation was obviously increased by the presence of glycerol, a further increase might be observed especially by the addition of unmodified nanoclay. This could surprisingly contribute to full (100%) biodegradation after 160 days despite the well-known antimicrobial property of chitosan. The results in this study demonstrate the great potential of plasticised chitosan-based nano-biocomposites in applications such as e.g., biodegradable packaging materials

Effect of particle size, coupling agent and DDGS additions on Paulownia wood polypropylene composites

Studies aimed at improving the tensile, flexural, impact, thermal, and physical characteristics of wood–plastic composites composed of Paulownia wood flour derived from 36-month-old trees blended with polypropylene were conducted. Composites of 25% and 40% w/w of Paulownia wood were produced by twin-screw compounding and injection molding. Composites containing 0–10% by weight of maleated polypropylene were evaluated and an optimum maleated polypropylene concentration determined, i.e., 5%. The particle size distribution of Paulownia wood filler is shown to have an effect on the tensile and flexural properties of the composites. Novel combination composites of dried distiller’s grain with solubles mixed with Paulownia wood (up to 40% w/w) were produced and their properties evaluated. Depending on the composite tested, soaking composites for 872 h alters mechanical properties and causes weight gain

Recent advances and perspectives on starch nanocomposites for packaging applications

Starch nanocomposites are popular and abundant materials in packaging sectors. The aim of this work is to review some of the most popular starch nanocomposite systems that have been used nowadays. Due to a wide range of applicable reinforcements, nanocomposite systems are investigated based on nanofiller type such as nanoclays, polysaccharides and carbonaceous nanofillers. Furthermore, the structures of starch and material preparation methods for their nanocomposites are also mentioned in this review. It is clearly presented that mechanical, thermal and barrier properties of plasticised starch can be improved with well-dispersed nanofillers in starch nanocomposites

Thermoplastic and Flexible Films from Arabinoxylan

Current interest in replacing fossil-fuel-derivedpolymers and materials in favor of renewable materials is high.An inherent difficulty with the use of biomass-derivedpolysaccharides and hemicelluloses in this context, however,is their stiffness and lack offlowability at temperatures relevantfor thermal processing, which severely limits their capacity forthermal processing. Here, we present a modification thatenables a heat-processable arabinoxylan (AX). The modifica-tion involves a ring-opening oxidation to a dialdehyde withsubsequent reduction of the aldehydes to alcohol, to increasethe number of OH groups, followed by an etherification withhydrophobic alkyl chains. The modified AX was successfullycompression molded with heat intofilmswhich becomethermoplastic in behavior and highlyflexibleandflows at temperatures above 130\ub0C. Thefilms are stretchable up to 200%,and their strength and strain deformation are controlled by the degree of oxidation and substitution of the AX polymer. Thesefindings are highly encouraging and open up the potential use of modified AX alone or as a composite in applications thatincludefilms, food packaging, and barriers via hot-melt processing techniques

Elaboration and Characterization of Nano-Biocomposites Based on Plasticized Poly(Hydroxybutyrate-Co-Hydroxyvalerate) with Organo-Modified Montmorillonite

Nano-biocomposites based on a biodegradable bacterial copolyester, poly(hydroxybutyrate-co-hydroxyvalerate), have been elaborated with an organo-modified montmorillonite (OMMT) clay as nanofiller, and acetyl tributyl citrate as plasticizer. The corresponding (nano)structures, thermal and mechanical properties, permeability, and biodegradability have been determined. Polyhydroxyalkanoates are very thermal sensitive then to follow the degradation the corresponding matrices have been analyzed by size exclusion chromatography. The results indicate that the addition of the plasticizer decreases the thermo-mechanical degradation, during the extrusion. These nano-biocomposites show an intercalated/exfoliated structure with good mechanical and barrier properties, and an appropriated biodegradation kinetic. Intending to understand the changes in the thermal properties, the nano-biocomposites were characterized by thermal gravimetric analysis and differential scanning calorimetry. The presence of the OMMT clay did not influence significantly the transition temperatures. However, the filler not only acted as a nucleating agent which enhanced the crystallization, but also as a thermal barrier, improving the thermal stability of the biopolymer. The results indicated that the addition of the plasticizer reduces the glass transition temperature and the crystalline melting temperature. The plasticizer acts as a processing aid and increases the processing temperature range (lower melting temperature). © 2011 Springer Science+Business Media, LLC

Calcium phosphates grown on bacterial cellulose template

© 2018 Elsevier Ltd and Techna Group S.r.l. Bacterial cellulose membranes were employed as templates for calcium phosphates deposition by successive immersion in solutions of Ca(NO 3 ) 2 ·4H 2 O and (NH 4 ) 2 HPO 4 , under ultrasonication. During the wet chemical reaction, mineral phases were loaded on bacterial cellulose fibrils, leading to precursor hybrid composites. These were subjected to a lyophilisation procedure in order to preserve the 3D porous aspect and afterwards to a thermal treatment with the aim of removing the polymeric phase and generating well crystallized structures. Different types of morphologies were achieved by varying the heating rate, as well as the calcination temperature and period. The as-prepared samples and the final ones were investigated from compositional and structural point of view through X-ray diffraction and Fourier-transform infrared spectroscopy and morphologically concerning by scanning electron microscopy. The magnetic properties were also evaluated in order to demonstrate the suitability of the obtained materials for the development of magnetic scaffolds dedicated to hard tissue applications