The role of shear fabric in controlling breakdown processes during laboratory slow-slip events

Understanding the physical mechanisms at the origin of slow-slip events has been proven a very challenging task. In particular, little is known on the role of fault heterogeneity during slow slip. In this study, we provide evidences that fault fabric controls slip velocity time histories during slow-slip events generated in the laboratory. We performed experiments using a double-direct biaxial shear apparatus and two different fault gouges, homogeneous quartz powder, and heterogeneous anhydrite/dolomite mixture. We measure details of fault slip to resolve the slip velocity function and volumetric deformation that, coupled with an analysis of the resulting microstructure, allow us to infer the mechanical processes at play. Our results show that slow-slip events can be generated for both fault gouges when k ~ kc with similar values of breakdown work. The shear fabric exerts a strong influence during the coseismic breakdown stage. In quartz, where most of the slip occurs on a very localized slipping surface, the peak slip velocity is attained near the final stage of friction breakdown and therefore a relevant amount of the mechanical work is absorbed during slip acceleration. In anhydrite/dolomite mixture, the peak slip velocity is suddenly reached after a relatively small drop in friction, accompanied by fault dilation, implying that most of the mechanical work is absorbed during slip deceleration. For anhydrite/dolomite mixture these results are likely related to heterogeneous slip distribution along the observed foliation. Taken together, these observations suggest that the mechanics of slow-slip events depends on shear zone fabric

Modeling the dynamic rupture propagation on heterogeneous faults with rate- and state-dependent friction

We investigate the effects of non-uniform distribution of constitutive parameters on the dynamic propagation of an earthquake rupture. We use a 2D finite difference numerical method and we assume that the dynamic rupture propagation is governed by a rate- and state-dependent constitutive law. We first discuss the results of several numerical experiments performed with different values of the constitutive parameters a (to account for the direct effect of friction), b (controlling the friction evolution) and L (the characteristic length-scale parameter) to simulate the dynamic rupture propagation on homogeneous faults. Spontaneous dynamic ruptures can be simulated on velocity weakening (a < b) fault patches: our results point out the dependence of the traction and slip velocity evolution on the adopted constitutive parameters. We therefore model the dynamic rupture propagation on heterogeneous faults. We use in this study the characterization of different frictional regimes proposed by Boatwright and Cocco (1996) based on different values of the constitutive parameters a, b and L. Our numerical simulations show that the heterogeneities of the L parameter affect the dynamic rupture propagation, control the peak slip velocity and weakly modify the dynamic stress drop and the rupture velocity. Moreover, a barrier can be simulated through a large contrast of L parameter. The heterogeneity of a and b parameters affects the dynamic rupture propagation in a more complex way. A velocity strengthening area (a > b) can arrest a dynamic rupture, but can be driven to an instability if suddenly loaded by the dynamic rupture front. Our simulations provide a picture of the complex interactions between fault patches having different frictional properties and illustrate how the traction and slip velocity evolutions are modified during the propagation on heterogeneous faults. These results involve interesting implications for slip duration and fracture energy

Evolution of the Sweetness Receptor in Primates. II. Gustatory Responses of Non-human Primates to Nine Compounds Known to be Sweet in Man

The gustatory responses of nine compounds, namely glycine, D-phenylalanine, D-tryptophan, cyanosuosan, magapame, sucrononate, campame, cyclamate and superaspartame, all known as sweet in man, were studied in 41 species or subspecies of non-human primates, selected among Prosimii (Lemuridae and Lorisidae), Platyrrhini (Callitrichidae and Cebidae) and Catarrhini (Cercopithecidae, Hylobatidae and Pongidae). The first six compounds are generally sweet to all primates, which implies that they interact with the primate sweetness receptors essentially through constant recognition sites. Campame is sweet only to Cebidae and Catarrhini, cyclamate only to Catarrhini, superaspartame principally to Callitrichidae and Catarrhini, which implies that all these compounds interact with the receptors partly through variable recognition sites. From the present work, from other previous results (where notably it was observed that alitame is sweet to all primates, ampame only to Prosimii and Catarrhini, and aspartame only to Catarrhini), and from the multipoint attachment (MPA) theory of sweetness reception (as elaborated by Nofre and Tinti from a detailed study of structure-activity relationships of various sweeteners in man), it is inferred that the primate sweetness receptors are very likely made up of eight recognition sites, of which the first, second, third, fourth, seventh and eighth are constant, and the fifth and sixth variable. From these results and from the MPA theory, it is also inferred that the recognition sites of the primate sweetness receptors could be: Asp-1 or Glu-1, Lys-2, Asp-3 or Glu-3, Thr-4, X-5, X-6, Thr-7, Ser-8, where the variable recognition sites X-5 and X-6 would be: Ala-5 and Ala-6 for Callitrichidae, Ser-5 and Ala-6 for Cebidae, Ala-5 and Thr-6 for Prosimii, and Thr-5 and Thr-6 for Catarrhini. By using Tupaiidae (tree shrews) as a reference outgroup and by means of other structural and functional molecular considerations, it appears that Callitrichidae have retained the most primitive receptor among the four types of primate receptors. The possible taxonomic and phylogenetic implications of these findings are discussed. Chem. Senses 21: 747-762, 199

Rupture process of the 2007 Niigata-ken Chuetsu-oki earthquake by non-linear joint inversion of strong motion and GPS data

We image the rupture history of the 2007 Niigata-ken Chuestu-oki (Japan) earthquake by a nonlinear joint inversion of strong motion and GPS data, retrieving peak slip velocity, rupture time, rise time and slip direction. The inferred rupture model contains two asperities; a small patch near the nucleation and a larger one located 10÷15 km to the south-west. The maximum slip ranges between 2.0 and 2.5 m and the total seismic moment is 1.6×1019 Nm. The inferred rupture history is characterized by rupture acceleration and directivity effects, which are stable features of the inverted models. These features as well as the source-to-receiver geometry are discussed to interpret the high peak ground motions observed (PGA is 1200 gals) at the Kashiwazaki-Kariwa nuclear power plant (KKNPP), situated on the hanging-wall of the causative fault. Despite the evident source effects, predicted PGV underestimates the observed values at KKNPP by nearly a factor of 10

A Kinematic Source-Time Function Compatible with Earthquake Dynamics

We propose a new source-time function, to be used in kinematic modeling of ground-motion time histories, which is consistent with dynamic propagation of earthquake ruptures and makes feasible the dynamic interpretation of kinematic slip models. This function is derived from a source-time function first proposed by Yoffe (1951), which yields a traction evolution showing a slip-weakening behavior. In order to remove its singularity, we apply a convolution with a triangular function and obtain a regularized source-time function called the regularized Yoffe function. We propose a parameterization of this slip-velocity time function through the final slip, its duration, and the duration of the positive slip acceleration (Tacc). Using this analytical function, we examined the relation between kinematic parameters, such as peak slip velocity and slip duration, and dynamic parameters, such as slip-weakening distance and breakdown-stress drop. The obtained scaling relations are consistent with those proposed by Ohnaka and Yamashita (1989) from laboratory experiments. This shows that the proposed source-time function suitably represents dynamic rupture propagation with finite slip-weakening distances

The dependence of traction evolution on the earthquake source time function adopted in kinematic rupture models

We compute the temporal evolution of traction by solving the elasto-dynamic equation and by using the slip velocity history as a boundary condition on the fault plane. We use different source time functions to derive a suite of kinematic source models to image the spatial distribution of dynamic and breakdown stress drop, strength excess and critical slip weakening distance (Dc). Our results show that the source time functions, adopted in kinematic source models, affect the inferred dynamic parameters. The critical slip weakening distance, characterizing the constitutive relation, ranges between 30% and 80% of the total slip. The ratio between Dc and total slip depends on the adopted source time functions and, in these applications, is nearly constant over the fault. We propose that source time functions compatible with earthquake dynamics should be used to infer the traction time history

Dependence of slip weakening distance (Dc) on final slip during dynamic rupture of earthquakes

In this study we aim to understand the dependence of the critical slip weakening distance (Dc) on the final slip (Dtot) during the propagation of a dynamic rupture and the consistency of their inferred correlation. To achieve this goal we have performed a series of numerical tests suitably designed to validate the adopted numerical procedure and to verify the actual capability in measuring Dc. We have retrieved two kinematic rupture histories from spontaneous dynamic rupture models governed by a slip weakening law in which a constant Dc distribution on the fault plane as well as a constant Dc / Dtot ratio are assumed, respectively. The slip velocity and the shear traction time histories represent the synthetic “real” target data which we aim to reproduce. We use a 3-D traction-at-split nodes numerical procedure to image the dynamic traction evolution by assuming our modeled slip velocity as a boundary condition on the fault plane. We assume a regularized Yoffe function as source time function in our modeling attempts and we measure the critical slip weakening distance from the inferred traction versus slip curves at each point on the fault. We compare the inferred values with those of the target dynamic models. Our numerical tests show that fitting the slip velocity functions of the target models at each point on the fault plane is not enough to retrieve good traction evolution curves and to obtain reliable measures of Dc. We find that the estimation of Dc is very sensitive to any small variation of the slip velocity function. An artificial correlation between Dc/Dtot is obtained when a fixed shape of slip velocity is assumed on the fault (i.e., constant rise time and constant time for positive acceleration) which differs from that of the target model. We point out that the estimation of fracture energy (breakdown work) on the fault is not affected by biases in measuring Dc

VLBA images of High Frequency Peakers

We propose a morphological classification based on the parsec scale structure of fifty-one High Frequency Peakers (HFPs) from the ``bright'' HFP sample. VLBA images at two adjacent frequencies (chosen among 8.4, 15.3, 22.2 and 43.2 GHz) have been used to investigate the morphological properties of the HFPs in the optically thin part of their spectrum. We confirm that there is quite a clear distinction between the pc-scale radio structure of galaxies and quasars: the 78% of the galaxies show a ``Double/Triple'' morphology, typical of Compact Symmetric Objects (CSOs), while the 87% of the quasars are characterised by Core-Jet or unresolved structure. This suggests that most HFP candidates identified with quasars are likely blazar objects in which a flaring self-absorbed component at the jet base was outshining the remainder of the source at the time of the selection based on the spectral shape. Among the sources classified as CSOs or candidates it is possible to find extremely young radio sources with ages of about 100 years or even less.Comment: 21 pages, 8 figures; accepted for pubblication in A&A. Paper version with full resolution images is available at http://www.ira.inaf.it/~ddallaca/orienti.p

Source of the 1693 Catania earthquake and tsunami (southern Italy): New evidence from tsunami modeling of a locked subduction fault plane,

The 1693 Catania earthquake, which caused 60000 deaths in eastern Sicily and generated a 5–10 m high tsunami, is investigated. GPS data indicate ESE‐WNW convergence in the Calabrian arc at 4–5 mm/yr. New high‐resolution seismic data image active compression at the toe of the accretionary wedge. The lack of instrumentally recorded thrust earthquakes suggests the presence of a locked subduction fault plane. Thermal modeling is applied to calculate the limits of the seismogenic zone. Tsunami modeling is performed to test the hypothesis that the 1693 earthquake occurred on the subduction fault plane (160 × 120 km in size) with 2 m of mean co‐seismic slip. This source successfully reproduces historical observations with regard to polarity and predicts 1–3 m high amplitudes. It is likely that only the SW segment of the subduction fault plane ruptured in 1693 and 1169, implying a recurrence interval of roughly 500 years for similar events