446 research outputs found
Matching small functions using centroid jitter and two beam position monitors
Matching to small beta functions is required to preserve emittance in plasma
accelerators. The plasma wake provides strong focusing fields, which typically
require beta functions on the mm-scale, comparable to those found in the final
focusing of a linear collider. Such beams can be time consuming to
experimentally produce and diagnose. We present a simple, fast, and noninvasive
method to measure Twiss parameters in a linac using two beam position monitors
only, relying on the similarity of the beam phase space and the jitter phase
space. By benchmarking against conventional quadrupole scans, the viability of
this technique was experimentally demonstrated at the FLASHForward
plasma-accelerator facility.Comment: 8 pages, 7 figure
Wakefield-Induced Ionization injection in beam-driven plasma accelerators
We present a detailed analysis of the features and capabilities of
Wakefield-Induced Ionization (WII) injection in the blowout regime of beam
driven plasma accelerators. This mechanism exploits the electric wakefields to
ionize electrons from a dopant gas and trap them in a well-defined region of
the accelerating and focusing wake phase, leading to the formation of
high-quality witness-bunches [Martinez de la Ossa et al., Phys. Rev. Lett. 111,
245003 (2013)]. The electron-beam drivers must feature high-peak currents
() and a duration comparable to the plasma
wavelength to excite plasma waves in the blowout regime and enable WII
injection. In this regime, the disparity of the magnitude of the electric field
in the driver region and the electric field in the rear of the ion cavity
allows for the selective ionization and subsequent trapping from a narrow phase
interval. The witness bunches generated in this manner feature a short duration
and small values of the normalized transverse emittance (). In addition, we show that the amount of injected
charge can be adjusted by tuning the concentration of the dopant gas species,
which allows for controlled beam loading and leads to a reduction of the total
energy spread of the witness beams. Electron bunches, produced in this way,
fulfil the requirements to drive blowout regime plasma wakes at a higher
density and to trigger WII injection in a second stage. This suggests a
promising new concept of self-similar staging of WII injection in steps with
increasing plasma density, giving rise to the potential of producing electron
beams with unprecedented energy and brilliance from plasma-wakefield
accelerators
The calcar screw in angular stable plate fixation of proximal humeral fractures - a case study
Background: With new minimally-invasive approaches for angular stable plate fixation of proximal humeral fractures, the need for the placement of oblique inferomedial screws ('calcar screw') has increasingly been discussed. The purpose of this study was to investigate the influence of calcar screws on secondary loss of reduction and on the occurrence of complications.
Methods: Patients with a proximal humeral fracture who underwent angular stable plate fixation between 01/2007 and 07/2009 were included. On AP views of the shoulder, the difference in height between humeral head and the proximal end of the plate were determined postoperatively and at follow-up. Additionally, the occurrence of complications was documented. Patients with calcar screws were assigned to group C+, patients without to group C-.
Results: Follow-up was possible in 60 patients (C+ 6.7 ± 5.6 M/C- 5.0 ± 2.8 M). Humeral head necrosis occurred in 6 (C+, 15.4%) and 3 (C-, 14.3%) cases. Cut-out of the proximal screws was observed in 3 (C+, 7.7%) and 1 (C-, 4.8%) cases. In each group, 1 patient showed delayed union. Implant failure or lesions of the axillary nerve were not observed. In 44 patients, true AP and Neer views were available to measure the head-plate distance. There was a significant loss of reduction in group C- (2.56 ± 2.65 mm) compared to C+ (0.77 ± 1.44 mm; p = 0.01).
Conclusions: The placement of calcar screws in the angular stable plate fixation of proximal humeral fractures is associated with less secondary loss of reduction by providing inferomedial support. An increased risk for complications could not be shown
The calcar screw in angular stable plate fixation of proximal humeral fractures - a case study
<p>Abstract</p> <p>Background</p> <p>With new minimally-invasive approaches for angular stable plate fixation of proximal humeral fractures, the need for the placement of oblique inferomedial screws ('calcar screw') has increasingly been discussed. The purpose of this study was to investigate the influence of calcar screws on secondary loss of reduction and on the occurrence of complications.</p> <p>Methods</p> <p>Patients with a proximal humeral fracture who underwent angular stable plate fixation between 01/2007 and 07/2009 were included. On AP views of the shoulder, the difference in height between humeral head and the proximal end of the plate were determined postoperatively and at follow-up. Additionally, the occurrence of complications was documented. Patients with calcar screws were assigned to group C+, patients without to group C-.</p> <p>Results</p> <p>Follow-up was possible in 60 patients (C+ 6.7 ± 5.6 M/C- 5.0 ± 2.8 M). Humeral head necrosis occurred in 6 (C+, 15.4%) and 3 (C-, 14.3%) cases. Cut-out of the proximal screws was observed in 3 (C+, 7.7%) and 1 (C-, 4.8%) cases. In each group, 1 patient showed delayed union. Implant failure or lesions of the axillary nerve were not observed. In 44 patients, true AP and Neer views were available to measure the head-plate distance. There was a significant loss of reduction in group C- (2.56 ± 2.65 mm) compared to C+ (0.77 ± 1.44 mm; p = 0.01).</p> <p>Conclusions</p> <p>The placement of calcar screws in the angular stable plate fixation of proximal humeral fractures is associated with less secondary loss of reduction by providing inferomedial support. An increased risk for complications could not be shown.</p
Status Report on the Hydrodynamic Simulations of a Tapered Plasma Lens for Optical Matching at the ILC Source
The International Linear Collider is a planned electron-positron linear
collider with its positron source producing positrons by aiming undulator
radiation onto a rotating target. The resulting, highly divergent positron beam
requires immediate optical matching to improve the luminosity and therefore the
success of the intended collision experiments. Here, optical matching refers to
the process of capturing particles and making them available for downstream
beamline elements like accelerators. In the past, this has been done with
sophisticated coils, but more recently the usage of a current-carrying plasma,
a so-called plasma lens, has been proposed as an alternative. For the
International Linear Collider idealised particle tracking simulations have
already been done with the purpose of finding the optimal plasma lens design
with respect to the captured positron yield. The proposed design is
characterised by a linearly widened radius in beam direction. Now further
research and development of this design is required, including both experiments
with a prototype set-up as well as corresponding simulations modelling the
hydrodynamics of the current-carrying plasma and the resulting magnetic field.
The accuracy of the latter will benefit greatly from the former. In this work,
first preliminary hydrodynamic simulations instil confidence into further
endeavours.Comment: Talk presented at the International Workshop on Future Linear
Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.
Self-stabilizing positron acceleration in a plasma column
Plasma accelerators sustain extreme field gradients, and potentially enable
future compact linear colliders. Although tremendous progress has been achieved
in accelerating electron beams in a plasma accelerator, positron acceleration
with collider-relevant parameters is challenging. A recently proposed positron
acceleration scheme relying on the wake generated by an electron drive beam in
a plasma column has been shown to be able to accelerate positron witness beams
with low emittance and low energy spread. However, since this scheme relies on
cylindrical symmetry, it is possibly prone to transverse instabilities that
could lead, ultimately, to beam break-up. In this article, we show that the
witness beam itself is subject to various damping mechanisms and, therefore,
this positron acceleration scheme is inherently stable towards misalignment of
the drive and witness beams. This enables stable, high-quality plasma-based
positron acceleration
Chirp mitigation of plasma-accelerated beams using a modulated plasma density
Plasma-based accelerators offer the possibility to drive future compact light
sources and high-energy physics applications. Achieving good beam quality,
especially a small beam energy spread, is still one of the major challenges.
For stable transport, the beam is located in the focusing region of the
wakefield which covers only the slope of the accelerating field. This, however,
imprints a longitudinal energy correlation (chirp) along the bunch. Here, we
propose an alternating focusing scheme in the plasma to mitigate the
development of this chirp and thus maintain a small energy spread
Metallic artefact reduction with monoenergetic dual-energy CT: systematic ex vivo evaluation of posterior spinal fusion implants from various vendors and different spine levels
Objectives: To evaluate optimal monoenergetic dual-energy computed tomography (DECT) settings for artefact reduction of posterior spinal fusion implants of various vendors and spine levels. Methods: Posterior spinal fusion implants of five vendors for cervical, thoracic and lumbar spine were examined ex vivo with single-energy (SE) CT (120 kVp) and DECT (140/100 kVp). Extrapolated monoenergetic DECT images at 64, 69, 88, 105keV and individually adjusted monoenergy for optimised image quality (OPTkeV) were generated. Two independent radiologists assessed quantitative and qualitative image parameters for each device and spine level. Results: Inter-reader agreements of quantitative and qualitative parameters were high (ICC = 0.81-1.00, κ = 0.54-0.77). HU values of spinal fusion implants were significantly different among vendors (P < 0.001), spine levels (P < 0.01) and among SECT, monoenergetic DECT of 64, 69, 88, 105keV and OPTkeV (P < 0.01). Image quality was significantly (P < 0.001) different between datasets and improved with higher monoenergies of DECT compared with SECT (V = 0.58, P < 0.001). Artefacts decreased significantly (V = 0.51, P < 0.001) at higher monoenergies. OPTkeV values ranged from 123-141keV. OPTkeV according to vendor and spine level are presented herein. Conclusions: Monoenergetic DECT provides significantly better image quality and less metallic artefacts from implants than SECT. Use of individual keV values for vendor and spine level is recommended. Key Points: • Artefacts pose problems for CT following posterior spinal fusion implants. • CT images are interpreted better with monoenergetic extrapolation using dual-energy (DE) CT. • DECT extrapolation improves image quality and reduces metallic artefacts over SECT. • There were considerable differences in monoenergy values among vendors and spine levels. • Use of individualised monoenergy values is indicated for different metallic hardware device
Young adults with mild traumatic brain injury--the influence of alcohol consumption--a retrospective analysis
PURPOSE: Alcohol abuse has been associated with aggressive behavior and interpersonal violence. Aim of the study was to investigate the role of alcohol consumption in a population of young adults with mild traumatic brain injuries and the attendant epidemiological circumstances of the trauma.
SUBJECTS AND METHODS: All cases of mild traumatic brain injury among young adults under 30 with an injury severity score <16 who were treated as inpatients between 2009 and 2012 at our trauma center were analyzed with regard to the influence of alcohol consumption by multiple regression analysis.
RESULTS: 793 patients, 560 men, and 233 women were included. The age median was 23 (range 14-30). Alcohol consumption was present in 302 cases. Most common trauma mechanism was interpersonal violence followed by simple falls on even ground. Alcohol consumption was present more often in men, unemployed men, patients who had interpersonal violence as a trauma mechanism, and in patients who were admitted to the hospital at weekends or during night time. It also increased the odds ratio to suffer concomitant injuries, open wounds, or fractures independently from the trauma mechanism. Length of hospital stay or incapacity to work did not increase with alcohol consumption.
CONCLUSIONS: Among young adults men and unemployed men have a higher statistical probability to have consumed alcohol prior to suffering mild traumatic brain injury. The most common trauma mechanism in this age group is interpersonal violence and occurs more often in patients who have consumed alcohol. Alcohol consumption and interpersonal violence increase the odds ratio for concomitant injuries, open wounds, and fractures independently from another
A Neuromuscular Training Program Performed on Foam is Accompanied by Improved Balance and Jump Height in Recreational Runners
Purpose: To assess balance, plyometric performance, and strength of recreational runners completing a neuromuscular training (NMT) program on a novel foam surface. Methods: After baseline testing, participants (n=14) completed 22-minute exercise sessions on foam twice weekly for eight weeks, and a post-training testing battery. Testing included lower quarter Y-balance test (LQYBT), dynamic leap and balance test (DLBT), squat jump and countermovement jump tests, and isometric strength testing of the foot and ankle via handheld dynamometry (HHD). Participants were asked to maintain their normal running routines throughout the study period and report any training missed due to injury. Results: Participants demonstrated significant (pConclusion: This study supports the use of progressive NMT on foam as a feasible intervention for recreational runners as all participants maintained typical running routines and reported no injuries. While further research is needed to directly inform possible effects of NMT on foam on injury risk and running performance, the improvements in single leg dynamic balance, lower body plyometric performance, and some indices of lower extremity strength in the present study suggest the efficacy of NMT performed on foam
- …