297 research outputs found
The jungle of methods for evaluating phenotypic and phylogenetic structure of communities
13 páginas, 4 figuras, 4 tablas.The way communities are assembled is an old ecological question currently experiencing renewed interest thanks to the recent advances in molecular biology and phylogenetics. The generality of these new methods has allowed us to understand the structure of communities of organisms from different kingdoms and at different scales. Concomitant with this growing interest, new methods, metrics, terms, and software have appeared that independently solve similar questions, but with different approaches. Here we provide a unifying framework on methods for community structure based on the relationships between four key concepts: phylogeny, phenotype, environment, and co-occurrence. The different approaches are based on different community representations of traits, the phylogenetic relationships of species in the community, or species occurrence along the environmental gradients. We finally provide insights on future directions of this emerging discipline.We thank María Clara Castellanos, Steve Kembel, Evan Weiher, and three anonymous referees for helpful comments and suggestions. This work has been developed under the framework of the Spanish projects VIRRA (CGL2009-12048/BOS) and VAMPIRO(CGL2008-05289-C02-01).Peer reviewe
Control of Hypertension by Yerapamil Enhances Renal Damage in a Rat Remnant Kidney Model
The effect of calcium channel blockers on the progression of renal failure is controversial. In contrast with earlier studies, we recently reported that moderately large doses of verapamil significantly accelerated chronic renal failure in the rat remnant kidney model [1]. Studies reporting beneficial effects of verapamil were characterised by a much lower dose of verapamil and by the start of treatment immediately after renal ablation, which potentially interfered with the initial phase of remnant kidney hypertrophy. We therefore studied the effects of a high, fully antihypertensive oral dose of verapamil (100-150 mg/kg/per day; group Vera high) and a low, haemodynamically almost ineffective dose (10—15 mg/kg per day; group Vera low), on the progression of chronic renal failure in female Wistar rats with 5/6 nephrectomy. The treatment was started no earlier than 5 weeks after renal ablation, and matched groups of 20 animals were followed for 16 weeks thereafter. High-dose verapamil reduced systolic blood pressure to median values of 130—140 mmHg throughout the experimental period, whereas blood pressure in Vera low animals remained elevated at median values of 165-172 mmHg similar to non-treated rats with 172-185 mmHg median systolic blood pressure. Despite control of hypertension, proteinuria increased more rapidly and to more elevated values in the Vera high animals (5.98 ± 0.91 mg/μmol creatinine before death/sacrifice) than in the Vera low and control groups (3.08 ± 0.91 and 3.60 ± 0.71 mg/μmol creatinine, respectively, P < 0.05 vs Vera high), and significantly more animals died during the observation period in the Vera high compared to the control group (6 of 20 vs 1 of 20, P < 0.05). Kidney remnants were larger in the Vera high group, mainly due to tubulointerstitial changes with filling of dilated tubular lumina with proteinaceous casts. Mean glomerular diameter did not differ between groups, and the percentage of glomeruli with segmental or global glomerulosclerosis was notsignificantly increased in the Vera high group. It is concluded that chronic high-dose verapamil therapy in the 5/6 nephrectomy model, albeit effective in controlling hypertension, is deleterious to renal function when remnant hypertrophy has previously been allowed to occur. A low, haemodynamically barely effective, dose of verapamil fails to alter the course of renal failure in this settin
Diffractive Backside Structures via Nanoimprint Lithography
AbstractFor decreasing thicknesses of wafer based silicon solar cells, photon management structures to maintain high quantum efficiencies will gain importance. Diffractive gratings on the wafer back side can be designed to achieve very high path length enhancements, especially for weakly absorbed infrared radiation. This technologically demanding concept has to be realised using processes with upscaling potential. Therefore, we present a fabrication process for producing photonic structures in silicon based on interference lithography and nanoimprint lithography (NIL).We realised linear as well as crossed gratings of different depths, which were etched into the wafer back side. Polarisation dependent reflection measurements were made to get information about potential absorption enhancement as well as the occurrence of parasitic absorption in the metal reflector. This is conducted for a PECVD silicon oxide buffer layer between grating and reflector as well as a spin coated silicon oxide layer. Besides these optical characterisations, we further investigated the electrical properties of the back surface, where we applied a concept in which electrical and optical properties are decoupled. This is realised by a layer stack on the wafer back side, consisting of a thin Al2O3 passivation and a doped amorphous silicon layer
Extended description of tunnel junctions for distributed modeling of concentrator multi-junction solar cells
One of the key components of highly efficient multi-junction concentrator solar cells is the tunnel junction interconnection. In this paper, an improved 3D distributed model is presented that considers real operation regimes in a tunnel junction. This advanced model is able to accurately simulate the operation of the solar cell at high concentraions at which the photogenerated current surpasses the peak current of the tunnel junctionl Simulations of dual-junction solar cells were carried out with the improved model to illustrate its capabilities and the results have been correlated with experimental data reported in the literature. These simulations show that under certain circumstances, the solar cells short circuit current may be slightly higher than the tunnel junction peak current without showing the characteristic dip in the J-V curve. This behavior is caused by the lateral current spreading toward dark regions, which occurs through the anode/p-barrier of the tunnel junction
Taking monocrystalline silicon to the ultimate lifetime limit
A central quantity to assess the high quality of monocrystalline silicon (on scales beyond mere purity) is the minority charge carrier lifetime. We demonstrate that the lifetime in high purity float zone material can be improved beyond existing observations, thanks to a deeper understanding of grown-in defects and how they can be permanently annihilated. In a first step we investigate the influence of several process sequences on the lifetime by applying a low temperature superacid passivation treatment. We find that a pre-treatment consisting of an oxidation at 1050 °C followed by a POCl3 diffusion at 900 °C can improve the lifetime by deactivating or eliminating grown-in defects. Then, pre-treated wafers of different float zone materials are passivated with three state-of-the-art layer stacks. Very high effective lifetime values are measured, thereby demonstrating the high quality of the surface passivation schemes and the pre-treated silicon wafers. The measured effective lifetimes exceed previous records, and we report an effective lifetime of 225 ms measured on a 200 µm thick 100 Ω cm n-type silicon wafer symmetrically passivated with a layer stack of a thin thermally grown oxide and a polycrystalline layer (the TOPCon layer stack)
Theory and simulation of quantum photovoltaic devices based on the non-equilibrium Green's function formalism
This article reviews the application of the non-equilibrium Green's function
formalism to the simulation of novel photovoltaic devices utilizing quantum
confinement effects in low dimensional absorber structures. It covers
well-known aspects of the fundamental NEGF theory for a system of interacting
electrons, photons and phonons with relevance for the simulation of
optoelectronic devices and introduces at the same time new approaches to the
theoretical description of the elementary processes of photovoltaic device
operation, such as photogeneration via coherent excitonic absorption,
phonon-mediated indirect optical transitions or non-radiative recombination via
defect states. While the description of the theoretical framework is kept as
general as possible, two specific prototypical quantum photovoltaic devices, a
single quantum well photodiode and a silicon-oxide based superlattice absorber,
are used to illustrated the kind of unique insight that numerical simulations
based on the theory are able to provide.Comment: 20 pages, 10 figures; invited review pape
25.1 High Efficiency Monolithic Perovskite Silicon Tandem Solar Cell with a High Bandgap Perovskite Absorber
Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 amp; 8201;eV in planar p i n tandem configuration. A methylammonium free FA0.75Cs0.25Pb I0.8Br0.2 3 perovskite with high Cs content is investigated for improved stability. A 10 molarity increase to 1.1 amp; 8201;m of the perovskite precursor solution results in amp; 8776;75 amp; 8201;nm thicker absorber layers and 0.7 amp; 8201;mA amp; 8201;cm amp; 8722;2 higher short circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80 and up to 25.1 certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3 absolute over 5 amp; 8201;months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30 tandem efficiency in the near futur
Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant material
<p>Abstract</p> <p>Background</p> <p>Modular neck adapters for hip arthroplasty stems allow the surgeon to modify CCD angle, offset and femoral anteversion intraoperatively. Fretting or crevice corrosion may lead to failure of such a modular device due to high loads or surface contamination inside the modular coupling. Unfortunately we have experienced such a failure of implants and now report our clinical experience with the failures in order to advance orthopaedic material research and joint replacement surgery.</p> <p>The failed neck adapters were implanted between August 2004 and November 2006 a total of about 5000 devices. After this period, the titanium neck adapters were replaced by adapters out of cobalt-chromium. Until the end of 2008 in total 1.4% (n = 68) of the implanted titanium alloy neck adapters failed with an average time of 2.0 years (0.7 to 4.0 years) postoperatively. All, but one, patients were male, their average age being 57.4 years (36 to 75 years) and the average weight 102.3 kg (75 to 130 kg). The failures of neck adapters were divided into 66% with small CCD of 130° and 60% with head lengths of L or larger. Assuming an average time to failure of 2.8 years, the cumulative failure rate was calculated with 2.4%.</p> <p>Methods</p> <p>A series of adapter failures of titanium alloy modular neck adapters in combination with a titanium alloy modular short hip stem was investigated. For patients having received this particular implant combination risk factors were identified which were associated with the occurence of implant failure. A Kaplan-Meier survival-failure-analysis was conducted. The retrieved implants were analysed using microscopic and chemical methods. Modes of failure were simulated in biomechanical tests. Comparative tests included modular neck adapters made of titanium alloy and cobalt chrome alloy material.</p> <p>Results</p> <p>Retrieval examinations and biomechanical simulation revealed that primary micromotions initiated fretting within the modular tapered neck connection. A continuous abrasion and repassivation process with a subsequent cold welding at the titanium alloy modular interface. Surface layers of 10 - 30 μm titanium oxide were observed. Surface cracks caused by fretting or fretting corrosion finally lead to fatigue fracture of the titanium alloy modular neck adapters. Neck adapters made of cobalt chrome alloy show significantly reduced micromotions especially in case of contaminated cone connection. With a cobalt-chromium neck the micromotions can be reduced by a factor of 3 compared to the titanium neck. The incidence of fretting corrosion was also substantially lower with the cobalt-chromium neck configuration.</p> <p>Conclusions</p> <p>Failure of modular titanium alloy neck adapters can be initiated by surface micromotions due to surface contamination or highly loaded implant components. In the present study, the patients at risk were men with an average weight over 100 kg. Modular cobalt chrome neck adapters provide higher safety compared to titanium alloy material.</p
- …