Mass-energy balance for an S-1C rocket exhaust cloud during static firing

Rocket exhaust cloud mass-energy balance measurements for Saturn S1-C static firin

The geometry and physical properties of exhaust clouds generated during the static firing of S-1C and S-2 rocket engines

An experimental program was conducted during the static firing of the S-1C stage 13, 14, and 15 rocket engines and the S-2 stage 13, 14, and 15 rocket engines. The data compiled during the experimental program consisted of photographic recordings of the time-dependent growth and diffusion of the exhaust clouds, the collection of meteorological data in the ambient atmosphere, and the acquisition of data on the physical structure of the exhaust clouds which were obtained by flying instrumented aircraft through the clouds. A new technique was developed to verify the previous measurements of evaporation and entrainment of blast deflector cooling water into the cloud. The results of the experimental program indicate that at the lower altitudes the rocket exhaust cloud or plume closely resembles a free-jet type of flow. At the upper altitudes, where the cloud is approaching an equilibrium condition, structure is very similar to a natural cumulus cloud

Knowledge, attitudes and practices of medical staff towards obesity management in patients with spinal cord injuries: an International survey of four western European countries

Objective: To (1) examine the opinions of medical staff working in spinal cord injury (SCI) centres (SCICs); (2) evaluate their knowledge, attitudes and practices towards obesity prevention and management; (3) report the number of beds and dietitians available at each SCIC. Methods: A 37-item questionnaire was sent to 23 SCICs in the UK, the Netherlands, Belgium and the Republic of Ireland between September 2012 and January 2013. Results: Eighteen SCICs returned the questionnaires for analysis. All respondents stated that they had an interest in obesity treatment but only 2.3% of the respondents received training in obesity management. Sixty-one percent of staff did not consider body mass index (BMI) to be appropriate for use in SCI patients and subsequently less than half of the respondents use BMI routinely. The majority of respondents reported that they are confident in dealing with overweight (74.5%) and obese (66.1%) SCI adults, less than half (44.1%) are confident in treating overweight and obese SCI children. Respondents also indicated the need for nationally adopted guidelines and a lack of physical activity provision. There were 17.5 whole-time equivalent (WTE) dietitians recorded in 22 SCICs, equivalent to 47.8 beds per WTE dietitians (range 10–420). Non-UK SCIC dietitians are significantly better resourced than in UK SCICs (beds per WTE dietitian: 36 vs 124, P=0.035). Conclusion: Medical staff expressed the need to participate in obesity prevention and management. Appropriate training should be considered for all medical staff and the development of specific weight management guidelines and dietetic provision should be considered

Automated monitoring of dairy cow body condition, mobility and weight using a single 3D video capture device

© 2018 Here we propose a low-cost automated system for the unobtrusive and continuous welfare monitoring of dairy cattle on the farm. We argue that effective and regular monitoring of multiple condition traits is not currently practicable and go on to propose 3D imaging technology able to acquire differing forms of related animal condition data (body condition, lameness and weight), concurrently using a single device. Results obtained under farm conditions in continuous operation are shown to be comparable or better than manual scoring of the herd. We also consider inherent limitations of using scoring and argue that sensitivity to relative change over successive observations offers greater benefit than the use of what may be considered abstract and arbitrary scoring systems

Beyond the social license to operate: Whole system approaches for a socially responsible mining industry

The demand for minerals, metals and rare-earth elements is rapidly growing to support the transition to low-carbon energies, and the mining industry must increase its supply while facing complex Environmental, Social and Governance (ESG) risks. Traditionally relying on its engineering expertise to maximize ore extraction, the sector must now find ways to sustain its production while facing increased scrutiny from the public, civil societies and shareholders alike. The paper reviews current practice in sustainability assessment to highlight sector-specific characteristics and the notion of trust as central to effective project developments. Because the social interface of extractive operations is complex, dynamic and non-linear in nature, we recommend going beyond the aim of obtaining a social license to operate and use Systems Thinking to fully embed Corporate Social Responsibility (CSR) at the core of strategic mine planning. System Dynamics can foster interdisciplinary collaborations by bridging together social and technical flows within simulation models to identify sustainable levers of change. We present the development of a stock and flow model quantifying causal mechanisms between the use of cyanide, the environment, communities and public trust, and operational productivity. Industry practitioners, researchers and facilitators can use the model as an adaptable framework to engage with systems modelling in mining. We recommend its use in conjunction with meaningful stakeholder's engagement to ensure shared understanding, reduced uncertainty and long-term benefits for all

Smith-Forbes, E., Howell, Dana M., Pitts, G., Willoughby, J., & Uhl, T. (Minimal Clinical Important Difference of the Quick Disabilities of the Arm, Shoulder, and Hand (Quickdash) for Post-Surgical Finger Phalanx Fractures

Purpose: STUDY DESIGN: Retrospective, multiple-group observational design. Objective: To determine the minimal clinically important difference (MCID) for the Quick Disabilities of the Arm, Should,er, and Hand (QuickDASH) outcome measure, for post-surgical palanx fracture diagnosis, using a triangulation of distribution-and-anchor-based approaches. Backgroudn: The MCID for the QuickDASH has been established using a pool of multiple conditions, and specifically for the shoulder, and other diagnoses in the elbow and wrist, but not for post-surgical finger fracture. Understanding specific threshold change values for post-surgical finger fracture can enhance the clinical decision-making process

Specificity of the Minimal Clinically Important Difference of the Quick Disabilities of the Arm Shoulder and Hand (QDASH) for Distal Upper Extremity Conditions

Retrospective cohort design. The minimal clinically important difference (MCID) for the quick Disabilities of the Arm, Shoulder and Hand (QDASH) has been established using a pool of multiple conditions, and only exclusively for the shoulder. Understanding diagnoses-specific threshold change values can enhance the clinical decision-making process. Before and after QDASH scores for 406 participants with conditions of surgical distal radius fracture, non-surgical lateral epicondylitis, and surgical carpal tunnel release were obtained. The external anchor administered at each fourth visit was a 15-point global rating of change scale. The test-retest reliability of the QDASH was moderate for all diagnoses: intraclass correlation coefficient model 2, 1, for surgical distal radius = 0.71; non-surgical lateral epicondylitis = 0.69; and surgical carpal tunnel = 0.69. The minimum detectable change at the 90% confidence level was 25.28; 22.49; and 27.63 points respectively; and the MCID values were 25.8; 15.8 and 18.7, respectively. For these three distal upper extremity conditions, a QDASH MCID of 16-26 points could represent the estimate of change in score that is important to the patient and guide clinicians through the decision-making process

A Retrospective Cohort Study of QuickDASH Scores for Three Hand Therapy Acute Upper Limb Conditions

Introduction: The QuickDASH is a valid and reliable outcome measure widely used to assess the function and pain in arm, shoulder, and hand disabilities. A recent study introduced a QuickDASH 80% cut point test to gauge patients at risk of poor outcomes. However, the utility of this test has not been validated. Purpose: To determine typical QuickDASH scores for three upper limb conditions and to test the sensitivity and specificity of the QuickDASH 80% cut point test in predicting patients at risk of poor outcomes. Methods: This is a retrospective study with a total of 406 patient records for whom QuickDASH scores were examined. The sensitivity and specificity of the QuickDASH 80% cut point test was investigated for three acute upper limb conditions seen in hand therapy: surgical distal radius fracture, nonsurgical lateral epicondylitis, and carpal tunnel release. Results: Typical scores were determined for three upper limb conditions. The QuickDASH 80% cut point test per upper limb condition returned poor sensitivity between 28.57% and 41.67%. Conclusion: The results did not support the QuickDASH 80% cut point test as a predictor of final outcome in these three patient populations. Patients with the worse initial 20% scores were not correctly classified as worse 20% final scores. This study provides summary data from three upper limb conditions to provide clinicians with comparison data to establish goals and educate patients

Adherence of Individuals in Upper Extremity Rehabilitation: A Qualitative Study

OBJECTIVE: To describe the rehabilitation experiences, expectations, and treatment adherence of patients receiving upper extremity (UE) rehabilitation who demonstrated discrepancy between functional gains and overall improvement. DESIGN: Qualitative (phenomenologic) interviews and analysis. SETTING: Outpatient UE rehabilitation. PARTICIPANTS: Patients with acute UE injuries (N=10). INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURE: Concerns related to UE rehabilitation patients demonstrating discrepancy between outcome measures. RESULTS: Five key themes emerged from the interviews of patients demonstrating discrepancy in their self-reported patient outcomes: (1) desire to return to normal, (2) initial anticipation of brief recovery, (3) trust of therapist, (4) cannot stop living, and (5) feelings of ambivalence. Challenges included living with the desire to move back into life. Multiple factors affected patient adherence: cost of treatment, patient-provider relation (difference between therapist and patient understanding on what is important for treatment), and patients expecting the treating therapists to be an expert and fix their problem. CONCLUSIONS: Patient adherence to UE rehabilitation presents many challenges. Patients view themselves as laypersons and seek the knowledge of a dedicated therapist who they trust to spend time with them to understand what they value as important and clarify their injury, collaboratively make goals, and explain the intervention to get them in essence, back into life, in the minimal required time. When categorized according to the World Health Organization\u27s multidimensional adherence model, domains identified in this model include social and economic, health care team and system, condition-related, therapy-related, and patient-related dimensions. Assessing factors identified to improve efficiency and effectiveness of clinical management can enhance patient adherence

Descriptive Analysis of Common Functional Limitations Identified by Patients with Shoulder Pain

Context: Recent establishment of G-codes by the US government requires therapists to report function limitations at initial evaluation. Limited information exists specific to the most common limitations in patients with shoulder pain. Objective: To describe the most commonly expressed shoulder limitations with activities and their severity/level of impairment from a patient’s perspective on the initial evaluation. Design: Descriptive. Setting: Patients reporting pain with overhead activity and seeking medical attention from one orthopedic surgeon were recruited as part of a cohort study. Patients: 176 with shoulder superior labral tear from anterior to posterior (SLAP), subacromial impingement, combined SLAP and rotator cuff, and nonspecific (female = 53, age = 41 ± 13 y; male = 123, age = 41 ± 12 y). Interventions: Data were obtained on the initial visit from the Patient-Specific Functional Scale (PSFS) questionnaire. Three researchers extracted meaningful concepts from the PSFS and linked them to the International Classification of Functioning (ICF) categories according to established ICF linking rules. Results: 176 participants yielded 765 meaningful concepts that were linked to the ICF with a 66% agreement between researchers before consensus. There were no differences between diagnoses. Of all patients, 88% reported functional limitations coded into meaningful concepts as represented by 10 ICF codes; 634 (83%) meaningful concepts were linked to the activities and participation domain while 129 (17%) were linked to the body function domain. Only 2 reported functional limitations that were considered nondefinable (nd). The overall average initial impairment score on the PSFS = 4 ± 2.5 out of 10 points. Conclusion: Meaningful concepts from the activities and participation domain were most commonly identified as functional limitations and were more prevalent than limitations from the body function domain. This information helps identify some of the most common limitations in patients with shoulder pain that therapists can use to efficiently document patient functional impairment