A review of solar thermal energy storage in beds of particles: Packed and fluidized beds

This review summarizes different solar thermal energy storage techniques from a particle technology perspective, including sensible, latent and thermochemical techniques for low- and high-temperature applications that use particles as the storage medium in the thermal energy storage system. The focus is on applications, experimental results, modeling and future trends. This review describes two different particle technologies used to store thermal energy: packed and fluidized beds. The advantages and disadvantages of both technologies are reviewed throughout different studies found in the literature for various thermal energy storage systems. Packed beds have the main advantage of thermal stratification, which increases the efficiency of solar collectors in low-temperature sensible energy storage systems and augments the exergy content in the bed. Moreover, they have been proven to be suitable as dual-media thermocline storage systems for CSP plants. In contrast, the high mixing rates of fluidized beds makes them suitable for the rapid distribution of concentrated solar energy in particle receiver CSP systems. In addition, their high heat and mass transfer rates, compared with those of packed beds, make them the preferred particle technology for thermochemical energy storage applications. This review also notes that it is important to find new materials with an appropriate size and density that can be properly used in a fluidized bed. Additionally, more specific research efforts are necessary to improve the understanding of the behavior of these materials during the fluidization process and over a high number of charging/discharging cycles

Flow and heat transfer analysis of a gas-particle fluidized dense suspension in a tube for CSP applications

This work presents a numerical study of the flow of particles in a gas–particle fluidized dense suspension for CSP applications using the Multi-Phase Particle in Cell (MP-PIC) method, implemented in CPFD-Barracuda software. The study covers two different numerical simulations. The first is a cold and isothermal model in which the fluctuations and control of the mass flow of particles ascending along the vertical tube was studied. In the second, a high-temperature boundary condition was imposed on the external surface of the tube and the energy equation was solved. In this second case, the heat transfer coefficient between the inner surface of the tube and the particles was numerically computed. The numerical results in the cold model are highly consistent with experimental data available in the literature (with values up to 150 kg/h and differences of approximately ±10 kg/h) and underline the significant impact of the pressure at the bottom of the bed and of the aeration flow rate on the mass flow of particles. The results of the non-isothermal case present heat transfer coefficients in the range of 300–400 W∕(m2 K) with transient fluctuations during the fluidization process. These fluctuations may be an influence on the mechanical damage of the tube, which is exposed to high levels of concentrated irradiation.This work was partially funded by the project PID2021-127322OB-I00, funded by the Ministerio de Ciencia e Innovación MICIN/AEI/10.13039/501100011033/ and by FEDER Una manera de hacer Europa; Project SBPLY/21/180501/000017, funded by the Regional Government of Castilla-La Mancha and by FEDER Una manera de hacer Europa; Project RED2018-102431-T, funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) and Project 2020-GRIN-28725, funded by Universidad de Castilla-La Mancha

Towards a standardization of biomethane potential tests

8 PáginasProduction of biogas from different organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. A workshop was held in June 2015 in Leysin Switzerland to agree on common solutions to the conundrum of inconsistent BMP test results. A discussion covers actions and criteria that are considered compulsory ito accept and validate a BMP test result; and recommendations concerning the inoculum substrate test setup and data analysis and reporting ito obtain test results that can be validated and reproduced.The workshop in Leysin, Switzerland, has been financed by the Swiss Federal Office for Energy, and co-sponsored by Bioprocess Control Sweden AB, Lund, Sweden. The authors thank Alexandra Maria Murray for editing the English

Towards a standardization of biomethane potential tests

Production of biogas from different organic materials is a most interesting source of renewable energy. The biomethane potential (BMP) of these materials has to be determined to get insight in design parameters for anaerobic digesters. Although several norms and guidelines for BMP tests exist, inter-laboratory tests regularly show high variability of BMPs for the same substrate. A workshop was held in June 2015, in Leysin, Switzerland, with over 40 attendees from 30 laboratories around the world, to agree on common solutions to the conundrum of inconsistent BMP test results. This paper presents the consensus of the intense roundtable discussions and cross-comparison of methodologies used in respective laboratories. Compulsory elements for the validation of BMP results were defined. They include the minimal number of replicates, the request to carry out blank and positive control assays, a criterion for the test duration, details on BMP calculation, and last but not least criteria for rejection of the BMP tests. Finally, recommendations on items that strongly influence the outcome of BMP tests such as inoculum characteristics, substrate preparation, test setup, and data analysis are presented to increase the probability of obtaining validated and reproducible results.info:eu-repo/semantics/publishedVersio

Biochemical methane potential (BMP) of solid organic materials: results obtained from an international interlaboratory study

IWA-487

A dataset for the analysis of antibody response to glycan alpha-Gal in individuals with immune-mediated disorders [version 1; peer review: 1 approved]

Humans evolved by losing the capacity to synthesize the glycan Galα1-3Galβ1-(3)4GlcNAc-R (α-Gal), which resulted in the development of a protective response mediated by anti-α-Gal IgM/IgG/IgA antibodies against pathogens containing this modification on membrane proteins. As an evolutionary trade-off, humans can develop the alpha-Gal syndrome (AGS), a recently diagnosed disease mediated by anti-α-Gal IgE antibodies and associated with allergic reactions to mammalian meat consumption and tick bites. However, the anti-α-Gal antibody response may be associated with other immune-mediated disorders such as those occurring in patients with COVID-19 and Guillain-Barré syndrome (GBS). Here, we provide a dataset (209 entries) on the IgE/IgM/IgG/IgA anti-α-Gal antibody response in healthy individuals and patients diagnosed with AGS, tick-borne allergies, GBS and COVID-19. The data allows correlative analyses of the anti-α-Gal antibody response with factors such as patient and clinical characteristics, record of tick bites, blood group, age and sex. These analyses could provide insights into the role of anti-α-Gal antibody response in disease symptomatology and possible protective mechanisms.We acknowledge UCLM, Spain support to Group SaBio.Peer reviewe