34,398 research outputs found

    Altimeter height measurement errors introduced by the presence of variable cloud and rain attenuation

    Get PDF
    It has recently been recognized that spatially inhomogeneous clouds and rain can substantially affect the height precision obtainable from a spaceborne radar altimeter system. Through computer simulation, it has been found that typical levels of cloud and rain intensities and associated spatial variabilities may degrade altimeter precision at 13.5 GHz and, in particular, cause severe degradation at 35 GHz. This degradation in precision is a result of radar signature distortion caused by variable attenuation over the beam limited altimeter footprint. Because attenuation effects increase with frequency, imprecision caused by them will significantly impact on the frequency selection of future altimeters. In this paper the degradation of altimeter precision introduced by idealized cloud and rain configurations as well as for a realistic rain configuration as measured with a ground based radar is examined

    ISM gas studies towards the TeV PWN HESS J1825-137 and northern region

    Full text link
    HESS J1825-137 is a pulsar wind nebula (PWN) whose TeV emission extends across ~1 deg. Its large asymmetric shape indicates that its progenitor supernova interacted with a molecular cloud located in the north of the PWN as detected by previous CO Galactic survey (e.g Lemiere, Terrier & Djannati-Ata\"i 2006). Here we provide a detailed picture of the ISM towards the region north of HESS J1825-137, with the analysis of the dense molecular gas from our 7mm and 12mm Mopra survey and the more diffuse molecular gas from the Nanten CO(1-0) and GRS 13^{13}CO(1-0) surveys. Our focus is the possible association between HESS J1825-137 and the unidentified TeV source to the north, HESS J1826-130. We report several dense molecular regions whose kinematic distance matched the dispersion measured distance of the pulsar. Among them, the dense molecular gas located at (RA, Dec)=(18.421h,-13.282∘^{\circ}) shows enhanced turbulence and we suggest that the velocity structure in this region may be explained by a cloud-cloud collision scenario. Furthermore, the presence of a Hα\alpha rim may be the first evidence of the progenitor SNR of the pulsar PSR J1826-1334 as the distance between the Hα\alpha rim and the TeV source matched with the predicted SNR radius RSNR_{\text{SNR}}~120 pc. From our ISM study, we identify a few plausible origins of the HESS J1826-130 emission, including the progenitor SNR of PSR J1826-1334 and the PWN G018.5-0.4 powered by PSR J1826-1256. A deeper TeV study however, is required to fully identify the origin of this mysterious TeV source.Comment: 19 figures, 27 pages, accepted by MNRA

    Local search for stable marriage problems

    Full text link
    The stable marriage (SM) problem has a wide variety of practical applications, ranging from matching resident doctors to hospitals, to matching students to schools, or more generally to any two-sided market. In the classical formulation, n men and n women express their preferences (via a strict total order) over the members of the other sex. Solving a SM problem means finding a stable marriage where stability is an envy-free notion: no man and woman who are not married to each other would both prefer each other to their partners or to being single. We consider both the classical stable marriage problem and one of its useful variations (denoted SMTI) where the men and women express their preferences in the form of an incomplete preference list with ties over a subset of the members of the other sex. Matchings are permitted only with people who appear in these lists, an we try to find a stable matching that marries as many people as possible. Whilst the SM problem is polynomial to solve, the SMTI problem is NP-hard. We propose to tackle both problems via a local search approach, which exploits properties of the problems to reduce the size of the neighborhood and to make local moves efficiently. We evaluate empirically our algorithm for SM problems by measuring its runtime behaviour and its ability to sample the lattice of all possible stable marriages. We evaluate our algorithm for SMTI problems in terms of both its runtime behaviour and its ability to find a maximum cardinality stable marriage.For SM problems, the number of steps of our algorithm grows only as O(nlog(n)), and that it samples very well the set of all stable marriages. It is thus a fair and efficient approach to generate stable marriages.Furthermore, our approach for SMTI problems is able to solve large problems, quickly returning stable matchings of large and often optimal size despite the NP-hardness of this problem.Comment: 12 pages, Proc. COMSOC 2010 (Third International Workshop on Computational Social Choice

    European Paediatric Formulation Initiative (EuPFI)-Formulating Ideas for Better Medicines for Children.

    Get PDF
    © American Association of Pharmaceutical Scientists 2016, published by Springer US, available online at doi: https://doi.org/10.1208/s12249-016-0584-1The European Paediatric Formulation Initiative (EuPFI), founded in 2007, aims to promote and facilitate the preparation of better and safe medicines for children through linking research and information dissemination. It brings together the capabilities of the industry, academics, hospitals, and regulators within a common platform in order to scope the solid understanding of the major issues, which will underpin the progress towards the future of paediatric medicines we want.The EuPFI was formed in parallel to the adoption of regulations within the EU and USA and has served as a community that drives research and dissemination through publications and the organisation of annual conferences. The membership and reach of this group have grown since its inception in 2007 and continue to develop and evolve to meet the continuing needs and ambitions of research into and development of age appropriate medicines. Five diverse workstreams (age-appropriate medicines, Biopharmaceutics, Administration Devices, Excipients and Taste Assessment & Taste Masking (TATM)) direct specific workpackages on behalf of the EuPFI. Furthermore, EuPFI interacts with multiple diverse professional groups across the globe to ensure efficient working in the area of paediatric medicines. Strong commitment and active involvement of all EuPFI stakeholders have proved to be vital to effectively address knowledge gaps related to paediatric medicines, discuss potential areas for further research and identify issues that need more attention and analysis in the future.Peer reviewedFinal Accepted Versio

    A continuous low star formation rate in IZw 18 ?

    Full text link
    Deep long-slit spectroscopic observations of the blue compact galaxy IZw 18 obtained with the CFH 3.6 m Telescope are presented. The very low value of oxygen abundance previously reported is confirmed and a very homogeneous abundance distribution is found (no variation larger than 0.05 dex) over the whole ionized region. We concur with Tenorio-Tagle (1996) and Devost et al. (1997) that the observed abundance level cannot result from the material ejected by the stars formed in the current burst, and propose that the observed metals were formed in a previous star formation episode. Metals ejected in the current burst of star formation remain most probably hidden in a hot phase and are undetectable using optical spectroscopy. We discuss different scenarios of star formation in IZw 18. Combining various observational facts, for instance the faint star formation rate observed in low surface brightness galaxies van Zee et al. (1997), it is proposed that a low and continuous rate of star formation occurring during quiescent phases between bursts could be a significant source of metal enrichment of the interstellar medium.Comment: 10 pages, 4 Postscript figures, to be published in Astronomy and Astrophysics main journa

    Measurement of disruption forces in JET using fiber-optic sensors

    Get PDF
    Monitoring the forces induced on the vacuum vessel when a disruption occurs is essential for the protection of the machine. Since divertor coils have been installed in JET, during disruptions a significant difference between the forces measured on the top and the bottom of the machine has been observed. In order to investigate these further, optical fiber transducers FBGs (Fiber Bragg Gratings) were installed in addition to the currently used strain gauges. During VDE (Vertical Displacement Event) tests, these new transducers were used to measure different level of disruptions ranging from 80T up to 230T vertical forces. The results were then compared with the strain gauges. The FBG measurement was carried out using a broadband light source illuminating an array of 4 FBGs through a combination of directional couplers, connectors and fiber-optic cable. The forces measured both by FBG and by the strain gauges are within the same range, except for the initial swing where large random differences are observed. The tests have demonstrated that the FBG-based force measurement system has adequate resolution (±1.52strain corresponding to a force of 4kN due to the geometry of the leg) and measurement range (50002strain or 13000kN) for this application

    High mass star formation in the infrared dark cloud G11.11-0.12

    Full text link
    We report detection of moderate to high-mass star formation in an infrared dark cloud (G11.11-0.12) where we discovered class II methanol and water maser emissions at 6.7 GHz and 22.2 GHz, respectively. We also observed the object in ammonia inversion transitions. Strong emission from the (3,3) line indicates a hot (~60 K) compact component associated with the maser emission. The line width of the hot component (4 km/s), as well as the methanol maser detection, are indicative of high mass star formation. To further constrain the physical parameters of the source, we derived the spectral energy distribution (SED) of the dust continuum by analysing data from the 2MASS survey, HIRAS, MSX, the Spitzer Space Telescope, and interferometric 3mm observations. The SED was modelled in a radiative transfer program: a) the stellar luminosity equals 1200 L_sun corresponding to a ZAMS star of 8 M_sun; b) the bulk of the envelope has a temperature of 19 K; c) the mass of the remnant protostellar cloud in an area 8x10^17 cm or 15 arcsec across amounts to 500M_sun, if assuming standard dust of the diffuse medium, and to about 60 M_sun, should the grains be fluffy and have ice mantles; d) the corresponding visual extinction towards the star is a few hundred magnitudes. The near IR data can be explained by scattering from tenuous material above a hypothetical disk. The class II methanol maser lines are spread out in velocity over 11 km/s. To explain the kinematics of the masing spots, we propose that they are located in a Kepler disk at a distance of about 250 AU. The dust temperatures there are around 150 K, high enough to evaporate methanol--containing ice mantles.Comment: 10 pages, 6 figures, Accepted for publication in Astronomy & Astrophysics Journa
    • 

    corecore