Use and Management of Medicinal Plants by Indigenous People in Boji Dirmeji District, Western Ethiopia

Ethnobotanical study of traditional medicinal plants used by local people of Kondala Woreda was conducted from September 2016 to June 2017. The aim of the study was to collect, identify, describe, compile and document medicinal plant species used by the local people for the treatments of human and livestock ailments. A total of 49 informants from seven kebeles were selected. A total of 64 plant species were collected. Out of these, 78% of medicinal plant species were used as cure for human ailments, 12% of species for livestock and 10% of species for the treatment of both human and livestock. The most frequently used plant parts were leaves and roots. In the study area, there are threats to medicinal plants and firewood was ranked first by selected key informant followed by, agricultural expansion. Results indicated that Viciafaba is most effective in treating stomach ache while Cordia africana is used as multipurpose medicinal plants. Majority of the 64 medicinal plants that were cited by informants, (57.8%) were used to treat a specific ailment. Thus, the community should conserve and manage these medicinal plant species before they become extinct

Molecular Epidemiology of Mycobacterium Tuberculosis Complex at Nekemte Municipality Abattoir, Western Ethiopia

A cross-sectional study was conducted at Nekemte Manicipality Abattoir from September 2009 to May 2010 to estimate the prevalence of bovine tuberculosis (BTB), and characterize its causative agents. Post mortem examination, bacteriological culturing, Zeihl Neelsen staining, multiplex polymerase chain reaction (PCR), and region of difference-4 (RD4) deletion typing were used for investigation. Cattles (1168) were recruited for the study and the prevalence was found to be 5.9% (70/1186) on the basis of gross lesion. 70% of the gross lesion was detected in the thoracic cavity while 25% of the lesion was found in the abdominal cavity. Only 31.4% (22/70) of the suspicious lesions yielded colonies of which 19 were acid-fast positive. Further identification of these 19 isolates using multiplex PCR revealed that 17 isolates belong to the Genus Mycobacterium while the remaining two isolates did not show signal to the Genus. Of the 17 isolates that showed signal to the Genus Mycobacterium, 7 were members of Mycobacterium tuberculosis (M. tuberculosis) complex while the remaining 10 isolates were members of the non-M. tuberculosis complex. Further identification and characterization of the M. tuberculosis complex members using RD4 deletion typing identified four isolates with intact RD4 which could be either M. tuberculosis or M. africanum and three isolates with deleted RD4 thus confirmed to be M. bovis. In conclusion, TB lesions were caused by both the members of M. tuberculosis complex and the non-M. tuberculosis complex Mycobacteria. Hence, as the majority of the isolates was the non-M. tuberculosis complex members, the pathogenecity of these members in cattle needs further study.Keywords: Mycobacterium tuberculosis; Molecular epidemiology; Cattle; Western Ethiopia; Nekemte; PC

Climate change mitigation and adaptation in the land use sector: from complementarity to synergy

Currently, mitigation and adaptation measures are handled separately, due to differences in priorities for the measures and segregated planning and implementation policies at international and national levels. There is a growing argument that synergistic approaches to adaptation and mitigation could bring substantial benefits at multiple scales in the land use sector. Nonetheless, efforts to implement synergies between adaptation and mitigation measures are rare due to the weak conceptual framing of the approach and constraining policy issues. In this paper, we explore the attributes of synergy and the necessary enabling conditions and discuss, as an example, experience with the Ngitili system in Tanzania that serves both adaptation and mitigation functions. An in-depth look into the current practices suggests that more emphasis is laid on complementarity—i.e., mitigation projects providing adaptation co-benefits and vice versa rather than on synergy. Unlike complementarity, synergy should emphasize functionally sustainable landscape systems in which adaptation and mitigation are optimized as part of multiple functions. We argue that the current practice of seeking co-benefits (complementarity) is a necessary but insufficient step toward addressing synergy. Moving forward from complementarity will require a paradigm shift from current compartmentalization between mitigation and adaptation to systems thinking at landscape scale. However, enabling policy, institutional, and investment conditions need to be developed at global, national, and local levels to achieve synergistic goals

Potentials of 3D extrusion‐based printing in resolving food processing challenges: A perspective review

Three-dimensional (3D) printing has promising application potentials in improving food product manufacturing, increasingly helping in simplifying the supply chain, as well as expanding the utilization of food materials. To further understand the current situation of 3D food printing in providing food engineering solutions with customized design, the authors checked recently conducted reviews and considered the extrusion-based type to deserve additional literature synthesis. In this perspective review, therefore, we scoped the potentials of 3D extrusion-based printing in resolving food processing challenges. The evolving trends of 3D food printing technologies, fundamentals of extrusion processes, food printer, and printing enhancement, (extrusion) food systems, algorithm development, and associated food rheological properties were discussed. The (extrusion) mechanism in 3D food printing involving some essentials for material flow and configuration, its uniqueness, suitability, and printability to food materials, (food material) types in the extrusion-based (3D food printing), together with essential food properties and their dynamics were also discussed. Additionally, some bottlenecks/concerns still applicable to extrusion-based 3D food printing were brainstormed. Developing enhanced calibrating techniques for 3D printing materials, and designing better methods of integrating data will help improve the algorithmic representations of printed foods. Rheological complexities associated with the extrusion-based 3D food printing require both industry and researchers to work together so as to tackle the (rheological) shifts that make (food) materials unsuitable.info:eu-repo/semantics/publishedVersio

Culex pipiens development is greatly influenced by native bacteria and exogenous yeast

Culex pipiens is the most cosmopolitan mosquito of the Pipiens Assemblage. By studying the nature of interactions between this species and microorganisms common to its breeding environment we can unravel important pitfalls encountered during development. We tested the survival rate of larval stages, pupae and adults of a Cx. pipiens colony exposed to a variety of microorganisms in laboratory conditions and assessed the transmission to offspring (F1) by those organisms that secured development up to adulthood. Three complementary experiments were designed to: 1) explore the nutritional value of yeasts and other microorganisms during Cx. pipiens development; 2) elucidate the transstadial transmission of yeast to the host offspring; and 3) to examine the relevance of all these microorganisms in female choice for oviposition-substratum. The yeast Saccharomyces cerevisiae proved to be the most nutritional diet, but despite showing the highest survival rates, vertical transmission to F1 was never confirmed. In addition, during the oviposition trials, none of the gravid females was attracted to the yeast substratum. Notably, the two native bacterial strains, Klebsiella sp. and Aeromonas sp., were the preferred oviposition media, the same two bacteria that managed to feed neonates until molting into 2nd instar larvae. Our results not only suggest that Klebsiella sp. or Aeromonas sp. serve as attractants for oviposition habitat selection, but also nurture the most fragile instar, L1, to assure molting into a more resilient stage, L2, while yeast proves to be the most supportive diet for completing development. These experiments unearthed survival traits that might be considered in the future development of strategies of Cx. pipiens control. These studies can be extended to other members of the Pipiens Assemblag

Genetic parameters for growth, reproductive and maternal traits in a multibreed meat sheep population

The genetic parameters for growth, reproductive and maternal traits in a multibreed meat sheep population were estimated by applying the Average Information Restricted Maximum Likelihood method to an animal model. Data from a flock supported by the Programa de Melhoramento Genético de Caprinos e Ovinos de Corte (GENECOC) were used. The traits studied included birth weight (BW), weaning weight (WW), slaughter weight (SW), yearling weight (YW), weight gain from birth to weaning (GBW), weight gain from weaning to slaughter (GWS), weight gain from weaning to yearling (GWY), age at first lambing (AFL), lambing interval (LI), gestation length (GL), lambing date (LD - number of days between the start of breeding season and lambing), litter weight at birth (LWB) and litter weight at weaning (LWW). The direct heritabilities were 0.35, 0.81, 0.65, 0.49, 0.20, 0.15 and 0.39 for BW, WW, SW, YW, GBW, GWS and GWY, respectively, and 0.04, 0.06, 0.10, 0.05, 0.15 and 0.11 for AFL, LI, GL, LD, LWB and LWW, respectively. Positive genetic correlations were observed among body weights. In contrast, there was a negative genetic correlation between GBW and GWS (-0.49) and GBW and GWY (-0.56). Positive genetic correlations were observed between AFL and LI, LI and GL, and LWB and LWW. These results indicate a strong maternal influence in this herd and the presence of sufficient genetic variation to allow mass selection for growth traits. Additive effects were of little importance for reproductive traits, and other strategies are necessary to improve the performance of these animals