Separation of microplastics from water using superhydrophobic silane-coupling-agent-modified geopolymer foam

Microplastics are a topical environmental problem that requires urgent solutions. They are ubiquitously present in various wastewaters and are discharged into aquatic environments because of difficulties in their removal. In this study, a novel filtration medium, superhydrophobic geopolymer foam, was prepared and investigated for the separation of microplastics from water. The foam was prepared using metakaolin, sodium silicate, sodium hydroxide, hydrogen peroxide, and Triton X-100 surfactant as raw materials and superhydrophobized with a silane coupling agent, triethoxy(octyl)silane. The purpose of the superhydrophobization was to improve the attachment of hydrophobic microplastic particles to the foam surface via chemical interactions. The modified geopolymer foam exhibited a water contact angle of 152°, and the presence of octyl chains on its surface was confirmed using Fourier transform infrared and X-ray photoelectron spectroscopies. When applied as a filter, the modified foam separated 53-63-µm sized polyethylene microspheres with ∼99 % removal efficiency, and no change in its separation efficiency was observed for ∼200 bed volumes of treated water. A comparison with an unmodified foam filter confirmed that the removal mechanism was not based on physical separation at higher flow rates, because the performance of the unmodified foam began to degrade after treating ∼5 bed volumes of wastewater. The performance of the modified foam was also validated with laundry washing effluents (particle size of microplastics varied roughly within 2–2000 μm), achieving ∼84 % separation efficiency for ∼50 bed volumes of wastewater. This study provides proof of concept of using superhydrophobic geopolymers as efficient, easy-to-prepare, and potentially low-cost separation media for microplastics from water effluents

Chemical aspects of peracetic acid based wastewater disinfection

Peracetic acid (PAA) has been studied for wastewater disinfection  applications for some 30 years and has been shown to be an effective disinfectant against many indicator microbes, including bacteria, viruses, and protozoa. One of the key advantages compared to, e.g., chlorine is the lack of harmful disinfection by-products. In this paper a pilot-scale study of PAA-based disinfection is presented. Indicator microbes (E. coli, total coliforms and coliphage viruses) as well as chemical parameters (pH, oxidation-reduction potential (ORP), chemical and biochemical oxygen  demand (COD and BOD), and residual PAA and hydrogen peroxide) were studied. The main aim of this investigation was to study how these  selected chemical parameters change during PAA treatment. Based on the results, disinfection was efficient at C·t values of 15 to 30 (mg·min)/l which equals to a PAA dose of 1.5 to 2 mg/l and a contact time of 10 to 15 min. In this concentration area changes in pH, COD and BOD were negligible. However, hydrogen peroxide residues may interfere with COD   measurements and apparent COD can be higher than the calculated   theoretical oxygen demand (ThOD). Additionally PAA or hydrogen peroxide residues interfere with the BOD test resulting in BOD values that are too  low. Residual PAA and ORP were found to correlate with remaining amounts of bacteria.Keywords: tertiary wastewater disinfection, peracetic acid, total coliform, E. coli, coliphage

Systemic inflammatory responses following welding inhalation challenge test

Peer reviewe

Water disinfection with geopolymer-bentonite composite foam containing silver nanoparticles

Geopolymers resemble conventional ceramics but can be manufactured at near-ambient temperatures. In this work, geopolymer-bentonite composite foam with silver nanoparticles was prepared and applied for water disinfection, inspired by point-of-use ceramic water filters. The inactivation efficiency against Escherichia coli and intestinal enterococci bacteria was found to be promising (0.6-2.4 and 0.3-1.4 log(10) reductions, respectively) for similar to 1 d. However, the inactivation efficiency against somatic coliphage viruses was poor (Peer reviewe

Reverse osmosis reject water management by immobilization into alkali-activated materials

Water-intensive industries face challenges due to water scarcity and pollution. In the management of these challenges, membrane processes play an important role. However, they produce significant amounts of reject waters, in which the separated salts and pollutants are concentrated. This study aims to develop a novel management concept for reject waters using alkali activation to immobilize salts in a solid phase using metakaolin, blast furnace slag (BFS), or their mixture as precursors and to create alkali-activated materials with sufficient properties to be potentially used in construction applications. Seven different waters were used to prepare the NaOH-based alkali activator solution: deionized water, three simulated seawaters with increasing salinity, and three reverse osmosis (RO) reject waters from mining or pulp and paper industries. Overall, BFS-based samples had the highest immobilization efficiency, likely due to the formation of layered double hydroxide phases (hydrotalcite, with anion exchange capacity) and hydrocalumite (chloride-containing mineral). Moreover, high-salinity water enhanced the dissolution of precursors, prolonged the setting time, and increased the compressive strength compared with nonsaline water. Thus, the obtained materials could be used in construction applications, such as backfilling material at mines where RO concentrates are commonly produced

Portmanteau tests for linearity of Stationary Time Series

This paper considers the problem of testing for linearity of stationary time series. Portmanteau tests are discussed which are based on generalized correlations of residuals from a linear model (that is, autocorrelations and cross-correlations of different powers of the residuals). The finite-sample properties of the tests are assessed by means of Monte Carlo experiments. The tests are applied to 100 time series of stock returns

Collaborative research: Accomplishments & potential

Although a substantial part of scientific research is collaborative and increasing globalization will probably lead to its increase, very few studies actually investigate the advantages, disadvantages, experiences and lessons learned from collaboration. In environmental epidemiology interdisciplinary collaboration is essential and the contrasting geographical patterns in exposure and disease make multi-location projects essential. This paper is based on a presentation given at the Annual Conference of the International Society for Environmental Epidemiology, Paris 2006, and is attempting to initiate a discussion on a framework for studying collaborative research. A review of the relevant literature showed that indeed collaborative research is rising, in some countries with impressive rates. However, there are substantial differences between countries in their outlook, need and respect for collaboration. In many situations collaborative publications receive more citations than those based on national authorship. The European Union is the most important host of collaborative research, mainly driven by the European Commission through the Framework Programmes. A critical assessment of the tools and trends of collaborative networks under FP6, showed that there was a need for a critical revision, which led to changes in FP7. In conclusion, it is useful to study the characteristics of collaborative research and set targets for the future. The added value for science and for the researchers involved may be assessed. The motivation for collaboration could be increased in the more developed countries. Particular ways to increase the efficiency and interaction in interdisciplinary and intercultural collaboration may be developed. We can work towards "the principles of collaborative research" in Environmental Epidemiology

The rate of X-ray-induced DNA double-strand break repair in the embryonic mouse brain is unaff ected by exposure to 50 Hz magnetic fi elds

Following in utero exposure to low dose radiation (10 – 200 mGy), we recently observed a linear induction of DNA double-strand breaks (DSB) and activation of apoptosis in the embryonic neuronal stem/progenitor cell compartment. No signifi cant induction of DSB or apoptosis was observed following exposure to magnetic fi elds (MF). In the present study, we exploited this in vivo system to examine whether exposure to MF before and after exposure to 100 mGy X-rays impacts upon DSB repair rates. Materials and methods : 53BP1 foci were quantifi ed following combined exposure to radiation and MF in the embryonic neuronal stem/progenitor cell compartment. Embryos were exposed in utero to 50 Hz MF at 300 m T for 3 h before and up to 9 h after exposure to 100 mGy X-rays. Controls included embryos exposed to MF or X-rays alone plus sham exposures. Results : Exposure to MF before and after 100 mGy X-rays did not impact upon the rate of DSB repair in the embryonic neuronal stem cell compartment compared to repair rates following radiation exposure alone. Conclusions : We conclude that in this sensitive system MF do not exert any signifi cant level of DNA damage and do not impede the repair of X-ray induced damage

Removal of ammonium from wastewater with geopolymer sorbents fabricated via additive manufacturing

Geopolymers have been recently explored as sorbents for wastewater treatment, thanks to their mechanical and chemical stability and to their low-energy manufacturing process. One specific application could be the removal of ammonium (NH4+) through exchange with Na+ ions. Additive manufacturing (AM) represents an especially interesting option for fabrication, as it allows to tailor the size, distribution, shape, and interconnectivity of pores, and therefore the access to charge-bearing sites. The present study provides a proof of concept for NH4+ removal from wastewater using porous geopolymer components fabricated via direct ink writing (DIW) AM approach. A metakaolin-based ink was employed for the fabrication of a log-pile structure with 45\ub0 rotation between layers, producing continuous yet tortuous macropores which are responsible for the high permeability of the sorbents. The ink consolidates in an amorphous, mesoporous network, with the mesopores acting as preferential sites for ion exchange. The printed sorbents were characterized for their physicochemical and mechanical properties and the NH4+ removal capacity in continuous-flow column experiments by using a model effluent. The lattices present high permeability and high cation exchange capacity and maintained a high amount of active ions after four cycles, allowing to reuse them multiple times