49 research outputs found
A new type of neutral-ionic interface in mixed-stack organic charge-tranfer crystals: Temperature induced ionicity change in ClMePD-DMeDCNQI
Raman and polarized infrared spectra of the mixed stack charge transfer
crystal 2-chloro-5methyl-p-phenylendiamine- -2,5-dimethyl-dicyanoquinonediimine
(ClMePD-DMeDCNQI) are reported as a function of temperature. A detailed
spectral interpretation allows us to gain new insight into the temperature
induced neutral-ionic transition in this compound. In particular, the crossing
of the neutral-ionic borderline appears to be quite different from that of the
few known temperature induced neutral-ionic phase transitions. First of all,
the ionicity change is continuous. Furthermore, the onset of stack dimerization
precedes, rather than accompanies, the neutral-ionic crossing. The (second
order) phase transition is then driven by the dimerization, but the extent of
dimerization is in turn affected by the ionicity change.Comment: LaTex (revTeX), 6 figures. Yields 10 pages postscript (including
figures
Pressure driven neutral-ionic transition in ClMePD-DMeDCNQI
Application of about 0.8 GPa pressure is sufficient to induce the
neutral-ionic transition in the mixed stack charge-transfer crystal
2-chloro-5-methyl--phenylenediamine--2,5-dimethyl-dicyanoquinonediimine
({\CD}). The ionicity increases continuously from 0.35 at ambient
conditions to 0.65 when the pressure is raised up to 2 GPa. Moreover,
stack dimerization begins well before the crossing of the neutral-ionic
interface. The evolution of the transition is similar to what observed in the
temperature induced phase change in the same compound. (cond-mat/0101179) A
distinguishing feature is represented by the simultaneous presence of domains
of molecules with slightly different ionicities across the transition pressure.
A comparison of the present example of pressure driven neutral-ionic transition
with the well studied cases of tetrathiafulvalene--chloranil and of
tetrathiafulvalene--2,5-dichloro-p-benzoquinone puts in evidence the remarkably
different evolution of the three transitions.Comment: 6 pages in *.PS format, 5 figure
A new type of neutral-ionic interface in mixed-stack organic charge-tranfer crystals: Temperature induced ionicity change in ClMePD-DMeDCNQI
Raman and polarized infrared spectra of the mixed stack charge transfer
crystal 2-chloro-5methyl-p-phenylendiamine- -2,5-dimethyl-dicyanoquinonediimine
(ClMePD-DMeDCNQI) are reported as a function of temperature. A detailed
spectral interpretation allows us to gain new insight into the temperature
induced neutral-ionic transition in this compound. In particular, the crossing
of the neutral-ionic borderline appears to be quite different from that of the
few known temperature induced neutral-ionic phase transitions. First of all,
the ionicity change is continuous. Furthermore, the onset of stack dimerization
precedes, rather than accompanies, the neutral-ionic crossing. The (second
order) phase transition is then driven by the dimerization, but the extent of
dimerization is in turn affected by the ionicity change.Comment: LaTex (revTeX), 6 figures. Yields 10 pages postscript (including
figures
Polymorphism, phonon dynamics and carrier-phonon coupling in pentacene
The crystal structure and phonon dynamics of pentacene is computed with the
Quasi Harmonic Lattice Dynamics (QHLD) method, based on atom-atom potential. We
show that two crystalline phases of pentacene exist, rather similar in
thermodynamic stability and in molecular density. The two phases can be easily
distinguished by Raman spectroscopy in the 10-100 cm-1 spectral region. We have
not found any temperature induced phase transition, whereas a sluggish phase
change to the denser phase is induced by pressure. The bandwidths of the two
phases are slightly different. The charge carrier coupling to low-frequency
phonons is calculated.Comment: 6 pages, 3 figures. Presented at ICFPAM-
This article is published in cooperation with Terclim 2022 (XIVth International Terroir Congress and 2nd ClimWine Symposium), 3-8 July 2022, Bordeaux, France.
Terroir is not just a geographical site, but also a complex concept aiming to express the "collective knowledge of the interactions" between the environment and the vines mediated through human action, "providing distinctive characteristics" to the final product (OIV 2010).In the popular press, it is often treated and communicated without a proper understanding of the mechanistic relationships between the wine characteristics and the site. These relationships are primarily rooted in the physical environment, particularly in the interactions between the soil-plant and atmosphere system, affecting grapevine physiology, grape composition and wine. Comprehension of the phenomena starts with viticulture zoning techniques, a crucial first step in mapping, describing and further studying terroirs. Viticulture zoning can be carried out with diverse empiricism and expertise and achieving different level of details in describing complex biophysical processes. Spatial and temporal scales can vary across studies, and not all of them have been able to capture the multidisciplinary nature of the terroir.The scientific understanding of the mechanisms ruling vineyard variability and grape composition is one of the most critical scientific focuses of terroir research. This knowledge can contribute to the analysis of climate change impacts on terroir resilience, the identification of new suitable land for viticulture, and the precise management of vineyards to reach a specific oenological goal.This article gives an overview of the latest approaches to terroir studies and of new zoning technology, with particular attention to their importance in supporting terroir resilience to climate change
Comparing kaolin and pinolene to improve sustainable grapevine production during drought
Viticulture is widely practiced in dry regions, where the grapevine is greatly exposed to water stress. Optimizing plant water use efficiency (WUE) without affecting crop yield, grape and wine quality is crucial to limiting use of water for irrigation and to significantly improving viticulture sustainability. This study examines the use in vineyards of particle film technology (engineered kaolin) and compares it to a film-forming antitranspirant (pinolene), traditionally used to limit leaf water loss, and to an untreated control. The trial was carried out under field conditions over three growing seasons, during which moderate to very severe plant water stress (down to -1.9 MPa) was measured through stem water potential. Leaf stomatal conductance (gs ) and photosynthesis rate (An ) were measured during the seasons and used to compute intrinsic WUE (WUEi, defined as An /gs ratio). Leaf temperature was also recorded and compared between treatments. Bunch quantity, bunch and berry weight, sugar accumulation, anthocyanin and flavonoid contents were measured. Finally, microvinifications were performed and resultant wines subjected to sensory evaluation.Results showed that the use of kaolin increased grapevine intrinsic WUE (+18% on average as compared to unsprayed vines) without affecting berry and bunch weight and quantity, or sugar level. Anthocyanin content increased (+35%) in kaolin treatment, and the wine was judged more attractive (p-value <0.05) and slightly more appreciated (p-value < 0.1) than control. Pinolene did not increase WUEi, limiting An more than gs; grapes with this treatment contained lower sugar and anthocyanin content than control, and the obtained wine was the least appreciated. This study demonstrates that particle film technology can improve vine WUEi and wine quality at the same time, while traditional antitranspirants were not as effective for these purposes. This positive effect can be used in interaction with other already-demonstrated uses of particle film technology, such as pest control and sunburn reduction, in order to achieve more sustainable vineyard management. \ua9 2016 Brillante et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Phonons and structures of tetracene polymorphs at low temperature and high pressure
Crystals of tetracene have been studied by means of lattice phonon Raman
spectroscopy as a function of temperature and pressure. Two different phases
(polymorphs I and II) have been obtained, depending on sample preparation and
history. Polymorph I is the most frequently grown phase, stable at ambient
conditions. A pressure induced phase transition, observed above 1 GPa, leads to
polymorph II, which is also obtained at temperatures below 140 K. Polymorph II
can also be maintained at ambient conditions.
We have calculated the crystallographic structures and phonon frequencies as
a function of temperature, starting from the configurations of the energy
minima found by exploring the potential energy surface of crystalline
tetracene. The spectra calculated for the first and second deepest minima match
satisfactorily those measured for polymorphs I and II, respectively. All
published x-ray structures, once assigned to the appropriate polymorph, are
also reproduced.Comment: 8 pages, 5 figures, RevTeX4, update after referees report
Spatio-temporal analysis of grapevine water behaviour in hillslope vineyards. The example of Corton hill, Burgundy.
6 pagesInternational audienc