1,397 research outputs found
Progress in Development of the Analogue Read-out Chip for Silicon Strip Detector Modules for LHC Experiments
Performance of a 128 channel analogue front-end chip for read-out of Si strip detector modules for LHC experiments
We present a 128-channel analogue front-end chip, SCT128A-HC, for readout of silicon strip detectors employed in the inner tracking detectors of the LHC experiment. The chip is produced in the radiation hard DMILL technology. The architecture of the chip and critical design issues are discussed. The performance of the chip has been evaluated in details in the test bench and is presented in the paper. The chip is used to read out prototype analogue modules compatible in size, functionality and performance with the ATLAS SCT base line modules. Several full size detector modules equipped with SCT128A-HC chips has been built and tested successfully in the lab with beta particles as well as in the test beam. The results concerning the signal-to-noise ratio, noise occupancy, efficiency and spatial resolution are presented. The radiation hardness issues are discussed. (5 refs)
Analogue read-out chip for Si strip detector modules for LHC experiments
We present a 128-channel analogue front-end chip SCTA128 for readout of silicon strip detectors employed in the inner tracking detectors of LHC experiments. The architecture of the chip and critical design issues are discussed. The performance of the chip has been evaluated in detail in bench tests and is presented in the paper. The chip is used to read out prototype analogue modules compatible in size, functionality and performance with the ATLAS SCT base line modules. Several full size detector modules equipped with SCTA128 chips have been built and tested successfully in the lab with E particles as well as in beam tests
Radiation tests on commercial instrumentation amplifiers, analog switches & DAC's
A study of several commercial instrumentation amplifiers (INA110, INA111, INA114, INA116, INA118 & INA121) under neutron and vestigial gamma radiation was done. Some parameters (Gain, input offset voltage, input bias currents) were measured on-line and bandwidth, and slew rate were determined before and after radiation. The results of the testing of some voltage references REF102 and ADR290GR and the DG412 analog switch are shown. Finally, different digital-to-analog converters were tested under radiation. (6 refs)
Instrumentation amplifiers and voltage controlled current sources for LHC cryogenic instrumentation
The ATLAS SCT grounding and shielding concept and implementation
This paper presents a complete description of Virgo, the French-Italian gravitational wave detector. The detector, built at Cascina, near Pisa (Italy), is a very large Michelson interferometer, with 3 km-long arms. In this paper, following a presentation of the physics requirements, leading to the specifications for the construction of the detector, a detailed description of all its different elements is given. These include civil engineering infrastructures, a huge ultra-high vacuum (UHV) chamber (about 6000 cubic metres), all of the optical components, including high quality mirrors and their seismic isolating suspensions, all of the electronics required to control the interferometer and for signal detection. The expected performances of these different elements are given, leading to an overall sensitivity curve as a function of the incoming gravitational wave frequency. This description represents the detector as built and used in the first data-taking runs. Improvements in different parts have been and continue to be performed, leading to better sensitivities. These will be detailed in a forthcoming paper
A Measurement of B Meson Production and Lifetime Using D`â Events in Z0 Decays
A study of B meson decays into D l- X final states is presented. In these events, neutral and charged D mesons originate predominantly from B+ and B0 decays, respectively. The dilution of this correlation due to D** production has been taken into account. From 263700 hadronic Z0 decays collected in 1991 with the DELPHI detector at the LEP collider, 92 D0 --> K- pi+, 35 D+ --> K- pi+ pi+ and 61 D*+ --> D0 pi+ followed by D0 --> K- pi+ or D0 --> K- pi+ pi+ pi-, are found with an associated lepton of the same charge as the kaon. From the D0 l- and D*+ l-, the probability f(d) that a b quark hadronizes into a B- (or B0BAR),meson is found to be 0.44 +/-0.08 +/-0.09, corresponding to a total (B(s) + LAMBDA(b)) hadronization fraction of 0.12(-0.12)+0.24 .By reconstructing the energy of each B meson, the b quark fragmentation is directly measured for the first time. The mean value of the B meson energy fraction is: [X(E)(B)] = 0.695+/-0.015(stat.)+/-0.029(syst.) Reconstructing D-lepton vertices, the following B life-times are measured: tau(B) = 1.27(-0.18)+0.22(stat.)+/-0.15(syst.) ps, where bBAR --> D0 l- X, tau(B) = 1.18(-0.27)+0.39(stat.)+/-0.15(syst.) ps, where BBAR --> D+ l- X, T(B) = 1.19(-0.19)+0.25(stat.)+/-0.15(syst.) ps where BBAR --> D*+ l- X, and an average tau(B) = 1.23(-0.13)+0.14(stat.)+/-0.15(syst.) ps is found. Allowing for decays into D** l- vBAR, the B+ and B0 lifetimes are: tau(B+)= 1.30(0.29)+0.33(stat.)+/-0.15(syst. exp.) +/-0.05(syst. D**) ps, tau(B0)= 1.17(-0.23)+0.29(stat.)+/-0.15(syst. exp.) +/-0.05 (syst. D**) ps, tau(B+)/tau(B0) = 1.11(0.39)+0.51(stat.)+/-0.05(syst. exp.) +/-0.10(syst. D**) ps
Measurement of the triple-gluon vertex from 4-JET events at LEP
From the combined data of 1990 and 1991 of the DELPHI experiment at LEP, 13057 4-jet events are obtained and used for determining the contribution of the triple-gluon vertex. The relevant variables are the generalized Nachtmann Reiter angle theta(NR)* and the opening angle of the two least energetic jets. A fit to their two-dimensional distribution yields C(A)/C(F)=2.12+/-0.35 and N(C)/N(A)=0.46+/-0.19, where C(A)/C(F) is the ratio of the coupling strength of the triple-gluon vertex to that of gluon bremsstrahlung from quarks, and N(C)/N(A), the ratio of the number of quark colours to the number of gluons. This constitutes a convincing model-independent proof of the existence of the triple-gluon vertex, since its contribution is directly proportional to C(A)/C(F). The results are in agreement with the values expected from QCD: C(A)/C(F)=2.25, and N(C)/N(A)=3/8
Highlights from the Pierre Auger Observatory
The Pierre Auger Observatory is the world's largest cosmic ray observatory.
Our current exposure reaches nearly 40,000 km str and provides us with an
unprecedented quality data set. The performance and stability of the detectors
and their enhancements are described. Data analyses have led to a number of
major breakthroughs. Among these we discuss the energy spectrum and the
searches for large-scale anisotropies. We present analyses of our X
data and show how it can be interpreted in terms of mass composition. We also
describe some new analyses that extract mass sensitive parameters from the 100%
duty cycle SD data. A coherent interpretation of all these recent results opens
new directions. The consequences regarding the cosmic ray composition and the
properties of UHECR sources are briefly discussed.Comment: 9 pages, 12 figures, talk given at the 33rd International Cosmic Ray
Conference, Rio de Janeiro 201
- âŠ