52 research outputs found
Tensile and nanoindentation tests analysis of Ti6Al4V alloy manufactured by laser powder bed fusion
Additive manufacturing (AM) technologies are widely used in the fabrication of topologically complex components with thin-walled features, such as lattice structures. In this context, Laser Powder Bed Fusion (L-PBF) is one of the most commonly used AM technologies for producing such components. In order to further expand and justify the application of these components in operation and to model their mechanical behavior, it is necessary to know the mechanical properties of the matrix material from which they are formed. Therefore, there is currently a high interest in studying the behavior of these materials when subjected to monotonic or cyclic loading. However, determining the mechanical properties of the matrix material of thin-walled structures using tensile tests is challenging on the required subsize specimens. As a micro- or even nano-scale technology, nanoindentation can be used to probe a small volume of specimen, thus allowing the mechanical properties such as Young modulus, of thin-walled structures to be determined. In this work, Young's modulus of L-PBF Ti6Al4V alloy produced using different laser power and scanning speed combinations, has been determined on nano and macro scale. By comparing obtained results at both scales, it is evident that Young's modulus values determined at nano scale are higher and more scattered when compared to results determined at macro scale. Furthermore, this study implies that a wider range or a higher number of L-PBF process parameters should be considered to model it's influence on Young's modulus with higher accuracy
Process parameters optimization in fused deposition modeling of polyether ether ketone
Fused Deposition Modeling is increasingly used for producing high-performing, creepresistant, biocompatible, fireproof, highly-stable parts from polyether ether ketone. However, the knowledge on this process is still poor and fragmented, and the lack of relevant data inhibits many applications. In this paper, the effects of the nozzle temperature, nozzle speed and layer thickness on the properties of PEEK processed by Fused Deposition Modeling were investigated by performing indentation, tensile, Scanning Electron Microscope, Computer Tomography and Energy Dispersive X-ray Spectroscopy tests on as-built samples. The outgassing behavior was also analyzed, while the synchrotron radiation was used to characterize the structure of selected samples on a hitherto unexplored scale. The samples morphology was finally used to identify the optimal process window. The results provided new insights on the process and novel data enabling new applications
Preface to special issue of selected papers from the Eleventh International Conference on CFD in the Minerals and Process Industries (CFD2015)
A volume-tracking method for the modelling of multi-fluid flows in engineering unit operations
A numerical code is presented for the numerical simulation of multi-fluid flows in pyrometallurgical unit operations. The code, MFVOF, is a finite difference code that allows transient solutions to immiscible multi-fluid flow problems to be generated in 2-D Cartesian and cylindrical geometries. The code is based on the use of an accurate PLIC (piecewise linear interface calculation) volume-tracking scheme to track the distortions of fluid bodies, with a redistribution procedure to ameliorate the formation of subgrid-scale fluid ligaments. Other recent enhancements to the code include swirl and expansion/compression modelling. The MFVOF code is not only able to model flows with low-curvature interface traditional applications of volume tracking - it is also able to generate robust and realistic transient representations of fragmentation and coalescence involving higher-curvature interfaces. This suggests that volume tracking can become increasingly useful for multi-phase flow modelling in chemical engineering unit operations, beyond traditional civil engineering and metallurgical applications
A volume-tracking method for the modelling of multi-fluid flows in engineering unit operations
A numerical code is presented for the numerical simulation of multi-fluid flows in pyrometallurgical unit operations. The code, MFVOF, is a finite difference code that allows transient solutions to immiscible multi-fluid flow problems to be generated in 2-D Cartesian and cylindrical geometries. The code is based on the use of an accurate PLIC (piecewise linear interface calculation) volume-tracking scheme to track the distortions of fluid bodies, with a redistribution procedure to ameliorate the formation of subgrid-scale fluid ligaments. Other recent enhancements to the code include swirl and expansion/compression modelling. The MFVOF code is not only able to model flows with low-curvature interface traditional applications of volume tracking - it is also able to generate robust and realistic transient representations of fragmentation and coalescence involving higher-curvature interfaces. This suggests that volume tracking can become increasingly useful for multi-phase flow modelling in chemical engineering unit operations, beyond traditional civil engineering and metallurgical applications
A novel mutation (p.Thr198Ser) in the 1A helix of keratin 5 causes the localized variant of Epidermolysis Bullosa Simplex
- …