615 research outputs found

    Hybrid Software Development Approaches in Practice: A European Perspective

    Get PDF
    Agile and traditional development approaches are used in combination in todays software development. To improve the understanding and to provide better guidance for selecting appropriate development approaches, it is important to analyze such combinations in practice. Results obtained from an online survey strongly confirm that hybrid development approaches are widely used in industry. Our results show that hybrid development approaches: (i) have become reality for nearly all companies; (ii) are applied to specific projects even in the presence of company-wide policies for process usage; (iii) are neither planned nor designed but emerge from the evolution of different work practices; and, (iv) are consistently used regardless of company size or industry secto

    Институционализация памяти: научно-организационные формы и практики изучения Великой Отечественной войны в советской и постсоветской историографии

    Get PDF
    Статья подготовлена в рамках проекта «Великая Отечественная война в пространстве исторической памяти Юга России» Подпрограммы фундаментальных исследований «Проблемы социально-экономического и этнополитического развития южного макрорегиона» Программы Президиума РАН «Фундаментальные проблемы пространственного развития Российской Федерации: междисциплинарный синтез» на 2009–2011 гг

    Invasiveness of previous treatment for peripheral arterial disease and risk of adverse cardiac events after coronary stenting

    Get PDF
    Patients with peripheral arterial disease (PADs), undergoing percutaneous coronary intervention (PCI), have higher adverse event risks. The effect of invasiveness of PADs treatment on PCI outcome is unknown. This study assessed the impact of the invasiveness of previous PADs treatment (invasive or non-invasive) on event risks after PCI with contemporary drug-eluting stents. This post-hoc analysis pooled 3-year patient-level data of PCI all-comer patients living in the eastern Netherlands, previously treated for PADs. PADs included symptomatic atherosclerotic lesion in the lower or upper extremities; carotid or vertebral arteries; mesenteric arteries or aorta. Invasive PADs treatment comprised endarterectomy, bypass surgery, percutaneous transluminal angioplasty, stenting or amputation; non-invasive treatment consisted of medication and participation in exercise programs. Primary endpoint was (coronary) target vessel failure: composite of cardiac mortality, target vessel-related myocardial infarction, or clinically indicated target vessel revascularization. Of 461 PCI patients with PADs, information on PADs treatment was available in 357 (77.4%) patients; 249 (69.7%) were treated invasively and 108 (30.3%) non-invasively. Baseline and PCI procedural characteristics showed no between-group difference. Invasiveness of PADs treatment was not associated with adverse event risks, including target vessel failure (20.5% vs. 16.0%; HR: 1.30, 95%-CI 0.75–2.26, p = 0.35), major adverse cardiac events (23.3% vs. 20.4%; HR: 1.16, 95%-CI 0.71–1.90, p = 0.55), and all-cause mortality (12.1% vs. 8.3%; HR: 1.48, 95%-CI 0.70–3.13, p = 0.30). In PADs patients participating in PCI trials, we found no significant relation between the invasiveness of previous PADs treatment and 3-year outcome after PCI. Consequently, high-risk PCI patients can be identified by consulting medical records, searching for PADs, irrespective of the invasiveness of PADs treatment. Graphical abstract: (Figure presented.) Comparison of patients with non-invasive and invasive PADs treatment. PADs peripheral arterial disease, PCI percutaneous coronary intervention.</p

    Design and characterisation of the CLICTD pixelated monolithic sensor chip

    Get PDF
    A novel monolithic pixelated sensor and readout chip, the CLIC Tracker Detector (CLICTD) chip, is presented. The CLICTD chip was designed targeting the requirements of the silicon tracker development for the experiment at the Compact Linear Collider (CLIC), and has been fabricated in a modified 180 nm CMOS imaging process with charge collection on a high-resistivity p-type epitaxial layer. The chip features a matrix of 16×128 elongated channels, each measuring 300×30 μm2. Each channel contains 8 equidistant collection electrodes and analog readout circuits to ensure prompt signal formation. A simultaneous 8-bit Time-of-Arrival (with 10 ns time bins) and 5-bit Time-over-Threshold measurement is performed on the combined digital output of the 8 sub-pixels in every channel. The chip has been fabricated in two process variants and characterised in laboratory measurements using electrical test pulses and radiation sources. Results show a minimum threshold between 135 and 180 e‾ and a noise of about 14 e‾ RMS. The design aspects and characterisation results of the CLICTD chip are presented

    Long-term outcome and chest pain in patients with true versus non-true bifurcation lesions treated with second-generation drug-eluting stents in the TWENTE trial

    Get PDF
    The objective of this study is to assess 3-year clinical outcome of patients with true bifurcation lesions (TBLs) versus non-true bifurcation lesions (non-TBLs) following treatment with second-generation drug-eluting stents (DES). TBLs are characterized by the obstruction of both main vessel and side-branch. Limited data are available on long-term clinical outcome following TBL treatment with newer-generation DES. We performed an explorative sub-study of the randomized TWENTE trial among 287 patients who had bifurcated target lesions with side-branches ≥2.0 mm. Patients were categorized into TBL (Medina classes: 1.1.1; 1.0.1; 0.1.1) versus non-TBL to compare long-term clinical outcome. A total of 116 (40.4 %) patients had TBL, while 171 (59.6 %) had non-TBL only. Target-lesion revascularization rates were similar (3.5 vs. 3.5 %; p = 1.0), and definite-or-probable stent thrombosis rates were low (both <1.0 %). The target-vessel myocardial infarction (MI) rate was 11.3 versus 5.3 % (p = 0.06), mostly driven by (periprocedural) MI ≤48 h from PCI. All-cause mortality and cardiac death rates were 8.7 versus 3.5 % (p = 0.06) and 3.5 versus 1.2 % (p = 0.22), respectively. The 3-year major adverse cardiac event rate for patients with TBL versus non-TBL was 20.0 versus 11.7 % (p = 0.05). At 1-, 2-, and 3-year follow-up, 6.5, 13.0, and 11.0 % of patients reported chest pain at less than or equal moderate physical effort, respectively, without any between-group difference. Patients treated with second-generation DES for TBL had somewhat higher adverse event rates than patients with non-TBL, but dissimilarities did not reach statistical significance. Up to 3-year follow-up, the vast majority of patients of both groups remained free from chest pain

    ECFA Detector R&D Panel, Review Report

    Full text link
    Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 103^{-3} at the ILC and 102^{-2} at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.Comment: 61 pages, 51 figure
    corecore