36 research outputs found
Assessment of the plume theory predictions of crown scorch using transport models
The aim of our work is to study numerically
crown scorch as the effectsof a fire line spreading through surface fuel under a
tree canopy. Theobjective was to assess the usual assumptions made when one uses
the Van Wagner criteria, which are indeed simple predictive models for crown scorch
height, to estimate crown scorch. For this purpose the FIRESTAR 2D and FIRETEC wildfire
simulators are used. We simulated the fire line by a heat source at ground level and
mainly investigated the temperature field. As a first step, we ran computations of
thermal plumes with no-wind and with no canopy, for first comparison to plume theory.
The influence of crown existence on the temperature field above the heat source, as well
as on crown scorch, was then investigated. As a second step, the effect of a wind to the
plume, as well as to crown scorch, was shown for the no-canopy and canopy cases
Recommended from our members
Coupled mesoscale-LES modeling of a diurnal cycle during the CWEX-13 field campaign: From weather to boundary-layer eddies
Multiscale modeling of a diurnal cycle of realâworld conditions is presented for the first time, validated using data from the CWEXâ13 field experiment. Dynamical downscaling from synopticâscale down to resolved threeâdimensional eddies in the atmospheric boundary layer (ABL) was performed, spanning 4 orders of magnitude in horizontal grid resolution: from 111 km down to 8.2 m (30 m) in stable (convective) conditions. Computationally efficient mesoscaleâtoâmicroscale transition was made possible by the generalized cell perturbation method with timeâvarying parameters derived from mesoscale forcing conditions, which substantially reduced the fetch to achieve fully developed turbulence. In addition, careful design of the simulations was made to inhibit the presence of underâresolved convection at convectionâresolving mesoscale resolution and to ensure proper turbulence representation in stablyâstratified conditions. Comparison to in situ windâprofiling lidar and nearâsurface sonic anemometer measurements demonstrated the ability to reproduce the ABL structure throughout the entire diurnal cycle with a high degree of fidelity. The multiscale simulations exhibit realistic atmospheric features such as convective rolls and global intermittency. Also, the diurnal evolution of turbulence was accurately simulated, with probability density functions of resolved turbulent velocity fluctuations nearly identical to the lidar measurements. Explicit representation of turbulence in the stablyâstratified ABL was found to provide the right balance with larger scales, resulting in the development of intraâhour variability as observed by the wind lidar; this variability was not captured by the mesoscale model. Moreover, multiscale simulations improved mean ABL characteristics such as horizontal velocity, vertical wind shear, and turbulence. Multiscale modeling of a realâworld diurnal cycle is presented for the first time, enabled by the generalized cell perturbation method The multiscale simulations exhibited realistic atmospheric features not captured by the mesoscale model such as convective rolls, global intermittency, and intraâhour variability Diurnal evolution of turbulence was accurately simulated, with probability density functions of resolved turbulent velocity fluctuations nearly identical to CWEXâ13 lidar measurement
Recommended from our members
Validation of Coupled Atmosphere-Fire Behavior Models
Recent advances in numerical modeling and computer power have made it feasible to simulate the dynamical interaction and feedback between the heat and turbulence induced by wildfires and the local atmospheric wind and temperature fields. At Los Alamos National Laboratory, the authors have developed a modeling system that includes this interaction by coupling a high resolution atmospheric dynamics model, HIGRAD, with a fire behavior model, BEHAVE, to predict the spread of wildfires. The HIGRAD/BEHAVE model is run at very high resolution to properly resolve the fire/atmosphere interaction. At present, these coupled wildfire model simulations are computationally intensive. The additional complexity of these models require sophisticated methods for assuring their reliability in real world applications. With this in mind, a substantial part of the research effort is directed at model validation. Several instrumented prescribed fires have been conducted with multi-agency support and participation from chaparral, marsh, and scrub environments in coastal areas of Florida and inland California. In this paper, the authors first describe the data required to initialize the components of the wildfire modeling system. Then they present results from one of the Florida fires, and discuss a strategy for further testing and improvement of coupled weather/wildfire models
Recommended from our members
Coupled Weather and Wildfire Behavior Modeling at Los Alamos: An Overview
Over the past two years, researchers at Los Alamos National Laboratory (LANL) have been engaged in coupled weather/wildfire modeling as part of a broader initiative to predict the unfolding of crisis events. Wildfire prediction was chosen for the following reasons: (1) few physics-based wild-fire prediction models presently exist; (2) LANL has expertise in the fields required to develop such a capability; and (3) the development of this predictive capability would be enhanced by LANL`s strength in high performance computing. Wildfire behavior models have historically been used to predict fire spread and heat release for a prescribed set of fuel, slope, and wind conditions (Andrews 1986). In the vicinity of a fire, however, atmospheric conditions are constantly changing due to non-local weather influences and the intense heat of the fire itself. This non- linear process underscores the need for physics-based models that treat the atmosphere-fire feedback. Actual wildfire prediction with full-physics models is both time-critical and computationally demanding, since it must include regional- to local-scale weather forecasting together with the capability to accurately simulate both intense gradients across a fireline, and atmosphere/fire/fuel interactions. Los Alamos has recently (January 1997) acquired a number of SGI/Cray Origin 2000 machines, each presently having 32 to 64 processors. These high performance computing systems are part of the Department of Energy`s Accelerated Strategic Computing Initiative (ASCI). While offering impressive performance now, upgrades to the system promise to deliver over 1 Teraflop (10(12) floating point operations per second) at peak performance before the turn of the century
Integrating plant physiology into simulation of fire behavior and effects
Wildfires are a global crisis, but current fire models fail to capture vegetation response to changing climate. With drought and elevated temperature increasing the importance of vegetation dynamics to fire behavior, and the advent of next generation models capable of capturing increasingly complex physical processes, we provide a renewed focus on representation of woody vegetation in fire models. Currently, the most advanced representations of fire behavior and biophysical fire effects are found in distinct classes of fine-scale models and do not capture variation in live fuel (i.e. living plant) properties. We demonstrate that plant water and carbon dynamics, which influence combustion and heat transfer into the plant and often dictate plant survival, provide the mechanistic linkage between fire behavior and effects. Our conceptual framework linking remotely sensed estimates of plant water and carbon to fine-scale models of fire behavior and effects could be a critical first step toward improving the fidelity of the coarse scale models that are now relied upon for global fire forecasting. This process-based approach will be essential to capturing the influence of physiological responses to drought and warming on live fuel conditions, strengthening the science needed to guide fire managers in an uncertain future
Prognostic model to predict postoperative acute kidney injury in patients undergoing major gastrointestinal surgery based on a national prospective observational cohort study.
Background: Acute illness, existing co-morbidities and surgical stress response can all contribute to postoperative acute kidney injury (AKI) in patients undergoing major gastrointestinal surgery. The aim of this study was prospectively to develop a pragmatic prognostic model to stratify patients according to risk of developing AKI after major gastrointestinal surgery. Methods: This prospective multicentre cohort study included consecutive adults undergoing elective or emergency gastrointestinal resection, liver resection or stoma reversal in 2-week blocks over a continuous 3-month period. The primary outcome was the rate of AKI within 7 days of surgery. Bootstrap stability was used to select clinically plausible risk factors into the model. Internal model validation was carried out by bootstrap validation. Results: A total of 4544 patients were included across 173 centres in the UK and Ireland. The overall rate of AKI was 14·2 per cent (646 of 4544) and the 30-day mortality rate was 1·8 per cent (84 of 4544). Stage 1 AKI was significantly associated with 30-day mortality (unadjusted odds ratio 7·61, 95 per cent c.i. 4·49 to 12·90; P < 0·001), with increasing odds of death with each AKI stage. Six variables were selected for inclusion in the prognostic model: age, sex, ASA grade, preoperative estimated glomerular filtration rate, planned open surgery and preoperative use of either an angiotensin-converting enzyme inhibitor or an angiotensin receptor blocker. Internal validation demonstrated good model discrimination (c-statistic 0·65). Discussion: Following major gastrointestinal surgery, AKI occurred in one in seven patients. This preoperative prognostic model identified patients at high risk of postoperative AKI. Validation in an independent data set is required to ensure generalizability
Numerical simulations of grass fires using a coupled atmosphere-fire model: Dynamics of fire spread
Effects of vegetation description parameters on forest fire behavior with FIRETEC
Texte complet sur CDROMInternational audienc
Etude des effets de l'hétérogénéité de la végétation sur la propagation du feu avec le modÚle HIGRAD/FIRETEC
des simulations numériques détaillées et des modélisations simplifiées. AprÚs un état des lieux général, nous présenterons de maniÚre plus détaillée notre contribution dans ce domaine