Optimized U-type Designs on Flexible Regions

The concept of a flexible region describes an infinite variety of symmetrical shapes to enclose a particular region of interest within a space. In experimental design, the properties of a function on the region of interest is analyzed based on a set of design points. The choice of design points can be made based on some discrepancy criterion. This paper investigates the generation of design points on a flexible region. It uses a recently proposed new measure of discrepancy for this purpose, the Central Composite Discrepancy. The optimization heuristic Threshold Accepting is used to generate low discrepancy Utype designs. The proposed algorithm is capable to construct optimal U-type designs under various flexible experimental regions in two or more dimensions. The illustrative results for the two dimensional case indicate that using an optimization heuristic in combination with an appropriate discrepancy measure, it is possible to produce high quality experimental designs on flexible regions.Central composite discrepancy, Experimental design, Flexible regions, Threshold accepting, U-type design

Oxygen semipermeable solid oxide membrane composites prepared by electrochemical vapor deposition

Ceramic membrane composites consisting of a coarse porous -alumina or two-layer porous alumina membrane support and an oxygen semipermeable gas tight thin (0.2–5 μm) yttria stabilized zirconia (YSZ) film are prepared by the electrochemical vapor deposition (EVD) method. The minimum gas-tight thickness of the YSZ films depends strongly on the average pore size of the support on which the films are deposited by the EVD process. The oxygen permeation fluxes through such gas tight YSZ membrane composites, measured in situ on the EVD apparatus, are in the range of 3 × 10−9 to 6 × 10−8 mol/cm2-sec with an oxygen partial pressures of P′O2 (high) ≈ 3 × 10−2 atm and P″O2 (low) ≈ 10−5 atm, much larger than the literature data for thicker YSZ pellets. During the oxygen permeation experiments the rate-limiting step is found to be the bulk electrochemical transport in the grown YSZ films with a thickness smaller than 10 μm.\u

On the kinetic study of electrochemical vapour deposition

A theoretical analysis is presented which quantitatively describes the transition behavior of the kinetics of the electrochemical vapour deposition of yttria-stabilized zirconia on porous substrates. It is shown that up to a certain deposition time and corresponding film thickness the rate limiting step is oxygen diffusion through the substrate pores, giving a linear dependence of the film thickness on the deposition time. For longer deposition times, i.e. thicker films, a transition of the rate limiting step to bulk electrochemical diffusion in the film occurs, resulting in a parabolic dependence of the film thickness on the deposition time. Simulation results are presented to show the effects of the experimental conditions on this transition time

The endoribonucleolytic N-terminal half of Escherichia coli RNase E is evolutionarily conserved in Synechocystis sp. and other bacteria but not the C-terminal half, which is sufficient for degradosome assembly

Escherichia coli RNase E, an essential single-stranded specific endoribonuclease, is required for both ribosomal RNA processing and the rapid degradation of mRNA. The availability of the complete sequences of a number of bacterial genomes prompted us to assess the evolutionarily conservation of bacterial RNase E. We show here that the sequence of the N-terminal endoribonucleolytic domain of RNase E is evolutionarily conserved in Synechocystis sp. and other bacteria. Furthermore, we demonstrate that the Synechocystis sp. homologue binds RNase E substrates and cleaves them at the same position as the E. coli enzyme. Taken together these results suggest that RNase E-mediated mechanisms of RNA decay are not confined to E. coli and its close relatives. We also show that the C-terminal half of E. coli RNase E is both sufficient and necessary for its physical interaction with the 3'-5' exoribonuclease polynucleotide phosphorylase, the RhlB helicase, and the glycolytic enzyme enolase, which are components of a "degradosome" complex. Interestingly, however, the sequence of the C-terminal half of E. coli RNase E is not highly conserved evolutionarily, suggesting diversity of RNase E interactions with other RNA decay components in different organisms. This notion is supported by our finding that the Synechocystis sp. RNase E homologue does not function as a platform for assembly of E. coli degradosome components

Modified CVD of nanoscale structures in and EVD of thin layers on porous ceramic membranes

Experiments on the modified chemical vapour deposition (CVD) and the electrochemical vapour deposition (EVD) of yttria-stabilized zirconia on porous substrates are reported. It is shown that, in the CVD stage, deposition occurs in a small (<20 um) region at the edge of the substrate, very likely leading to pore narrowing. This result illustrates the feasibility of the CVD technique for the modification of ceramic membranes to the (sub)nanometer scale. Film growth in the EVD stage is shown to be controlled by the inpore diffusion of the oxygen source reactant for short (<5 h) deposition times. The yttria to zirconia ratio in the deposited film is determined by the ratio present in the vapour phase. Very thin (<2 um) films can be deposited, which have a potential application in solid oxide fuel cells

A Kinetic Study of the Electrochemical Vapor Deposition of Solid Oxide Electrolyte Films on Porous Substrates

The electrochemical vapor deposition (EVD) method is a very promising technique for making gas-tight dense solidelectrolyte films on porous substrates. In this paper, theoretical and experimental studies on the kinetics of the depositionof dense yttria-stabilized zirconia films on porous ceramic substrates by the EVD method are presented. The more systematictheoretical analysis is based on a model which takes into account pore diffusion, bulk electrochemical transport, andsurface charge-transfer reactions in the film growing process. The experimental work is focused on examining the effectsof the oxygen partial pressure and substrate pore dimension on the EVD film growth rates. In accordance with thetheoretical prediction, the pressure of oxygen source reactant (e.g., water vapor), the partial pressure of oxygen and substratepore dimension are very important in affecting the rate-limiting step and film growth rate of the EVD process. In thepresent experimental conditions (e.g., low pressure of oxygen source reactant and small substrate pore-size/thicknessratio), the diffusion of the oxygen source reactant in the substrate pore is found to be the rate-limiting step for the EVDprocess

Shadowing Effects on Vector Boson Production

We explore how nuclear modifications to the nucleon structure functions, shadowing, affect massive gauge boson production in heavy ion collisions at different impact parameters. We calculate the dependence of $Z^0$, $W^+$ and $W^-$ production on rapidity and impact parameter to next-to-leading order in Pb+Pb collisions at 5.5 TeV/nucleon to study quark shadowing at high $Q^2$. We also compare our Pb+Pb results to the $pp$ rapidity distributions at 14 TeV.Comment: 25 pages ReVTeX, 12 .eps figures, NLO included, version accepted for publication in Physical Review

The effect of organic pollution on the abundance and distribution of aquatic oligochaetes in an urban water basin, Taiwan

Aquatic oligochaetes are abundant in polluted areas and are, therefore, commonly used as bioindicators to study organic pollution in rivers and streams. In order to develop a species-level oligochaete biotic index to reflect the River Pollution Index (RPI) in the Taichung Water Basin in Taiwan, we conducted a systematic sampling scheme to collect aquatic oligochaetes from the sediment samples of watercourses in the Taichung Water Basin, Taiwan. We evaluated the relationships between aquatic oligochaetes and the sewage pollution using statistical methods. The distribution of aquatic oligochaetes in relation to environmental variables, such as water quality and sediment characteristics of the regional urban contaminated streams was expressed by Canonical Correspondence Analysis (CCA). We identified 17 species of aquatic oligochaetes (Annelida, Clitellata) including 3 species of Tubificidae, 13 species of Naididae, and 1 species of Enchytraeidae from the watercourses of an urban region in the Taichung Water Basin in Taiwan, during the summer and winter of 2005 and 2006. A positive correlation was found between the total abundance of aquatic oligochaetes and the RPI (r = 0.58, P < 0.05). However, only population density of the most abundant tubificid, Limnodrilus hoffmeisteri, increased with increasing RPI values and a significantly negative correlation was found between the population density of the naidid, Nais communis, and RPI values. The results of CCA indicated that certain naidids, such as Aulophorus furcatus and Allonais gwaliorensis also tolerated extremely polluted environments in upper stream or stony habitats, implying that tubificids should not be the sole representation of simple biotic indices but should also include pollution-tolerant naidids. We found that the community structure of aquatic oligochaetes was influenced by short-term variations in microhabitat rather than according to seasonal factors in our study region. The results proved that aquatic oligochaetes were sensitive enough to provide a supplement for the regional urban pollution assessment applications for biotic indicators at the species-level

Submodular Maximization Meets Streaming: Matchings, Matroids, and More

We study the problem of finding a maximum matching in a graph given by an input stream listing its edges in some arbitrary order, where the quantity to be maximized is given by a monotone submodular function on subsets of edges. This problem, which we call maximum submodular-function matching (MSM), is a natural generalization of maximum weight matching (MWM), which is in turn a generalization of maximum cardinality matching (MCM). We give two incomparable algorithms for this problem with space usage falling in the semi-streaming range---they store only $O(n)$ edges, using $O(n\log n)$ working memory---that achieve approximation ratios of $7.75$ in a single pass and $(3+\epsilon)$ in $O(\epsilon^{-3})$ passes respectively. The operations of these algorithms mimic those of Zelke's and McGregor's respective algorithms for MWM; the novelty lies in the analysis for the MSM setting. In fact we identify a general framework for MWM algorithms that allows this kind of adaptation to the broader setting of MSM. In the sequel, we give generalizations of these results where the maximization is over "independent sets" in a very general sense. This generalization captures hypermatchings in hypergraphs as well as independence in the intersection of multiple matroids.Comment: 18 page

Hybrid meson decay from the lattice

We discuss the allowed decays of a hybrid meson in the heavy quark limit. We deduce that an important decay will be into a heavy quark non-hybrid state and a light quark meson, in other words, the de-excitation of an excited gluonic string by emission of a light quark-antiquark pair. We discuss the study of hadronic decays from the lattice in the heavy quark limit and apply this approach to explore the transitions from a spin-exotic hybrid to $\chi_b \eta$ and $\chi_b S$ where $S$ is a scalar meson. We obtain a signal for the transition emitting a scalar meson and we discuss the phenomenological implications.Comment: 18 pages, LATEX, 3 ps figure