Synthetic Aperture Radar Interferometry for Structural Health Monitoring of Bridges: Potentialities and Open Research Questions

The development of synthetic aperture radar (SAR) interferometry has provided unprecedented opportunities to remotely analyze the behavior of civil structures, transcending traditional limitations associated with in-situ methods. However, while the effectiveness of SAR technology in monitoring wide-area geohazards is demonstrated in several applications, its extension to civil structures, which have a much smaller footprint, requires further investigation of several aspects. This paper investigates the potentialities and challenges connected with the use of SAR technology for civil engineering artifacts, fostered by the availability of remote satellite open data. Recently, the European Space Agency has introduced the European Ground Motion Service (EGMS) under the Copernicus program. This innovative and freely accessible resource provides comprehensive information regarding ground motion across Europe through multitemporal interferometric analysis of Sentinel-1 images acquired since 2015. In this paper the focus is on the Palatino Bridge in Rome, Italy. Data from the ascending and descending orbit are combined to obtain vertical and longitudinal displacements of the structure, allowing for a better estimation of the bridge's response to varying environmental conditions. Results are then compared with those obtained processing high resolution data from COSMO-SkyMed of the Italian Space Agency, showing the consistency of findings

Value of Information Analysis Accounting for Sensor Data Quality: focus on drift

Structural health monitoring plays a crucial role in assessing the condition of civil structures, providing information for regular maintenance and post-disaster emergency management. However, the reliability of structural health monitoring outcomes can be compromised by sensor malfunctions. Over the past two decades, sensor validation tools have been proposed to identify and discard abnormal measurements before extracting information from the structural health monitoring system. The long-term benefits of structural health monitoring systems are commonly evaluated without considering the possibility of faulty sensors. This can lead to suboptimal maintenance decisions. Recently, a Bayesian decision theory-based framework has been introduced to account for different data quality issues and quantify the benefit of implementing a sensor validation tool. This novel approach expands the traditional Value of Information concept to encompass multiple "functioning" states of the structural health monitoring system. This paper mainly focused on a specific data quality issue, i.e., bias or drift in the monitoring outcome. Previous applications of this framework regard simplified decision scenarios, where the monitoring system was either “damaged” or “undamaged”, considering a fixed drift value. In this paper, the impact of uncertain drift levels on the Value of Information in structural health monitoring is investigated, addressing real-world complexities. A numerical case study is considered to illustrate the practical implications of the VoI framework

Experimental verification of the interpolation method on a real damaged bridge

The identification of damage in a bridge from changes in its vibrational behavior is an inverse problem of important practical value. Significant advances have been obtained on this topic in the last two-three decades, both from the theoretical and applied point of view. One of the main problems when dealing with the assessment of vibration based damage identification methods is the lack of experimental data recorded on real damaged structures. Due to this, a large number of damage identification algorithms are tested using data simulated by numerical models. The availability of data recorded on a damaged bridge before its demolition gave the authors the uncommon chance to verify the sensitivity and reliability of the IDDM basing on data recorded on a real structure. Specifically data recorded on a reinforced concrete single-span supported bridge in the Municipality of Dogna (Friuli, Italy) were used to apply the damage localization algorithm. Harmonically forced tests were conducted after imposing artificial, increasing levels of localized damage. In this paper the sensitivity of the method is discussed with respect to the number of instrumented locations and to the severity of the damage scenarios considere

The value of visual inspections for emergency management of bridges under seismic hazard

One of the major problems in the aftermath of an earthquake is the management of the emergency inspection operations. Traffic restriction, including limited emergency operations or bridge closure due to safety concerns, may be issued to keep an appropriate level of safety. Visual inspections may be conducted to provide useful information on the damage state of the bridge and support the decision of imposing traffic restriction up to the complete closure of the bridge, or for allowing the immediate use of safe bridges after the event. The cost related to the inspection shall be at least balanced by the uncertainty reduction provided by the inspection data and the benefit is higher when the costs associated with taking a wrong management decision are high, but may be negligible if this is not the case. Practical tools and methods to forecast this benefit before collecting the information exist in classical decision theory, but are seldom applied by engineers. In this paper a framework based on the concept of Value of Information (VoI) from the pre-posterior Bayesian decision analysis is adopted and applied to the case study of a two span reinforced concrete bridge

ENAMA “Certification” of the inspection workshop activity: the necessary requirements

In European Directive 128/2009/EC it is stated that “each Member State shall establish certificate systems designed to allow the verification of sprayers inspections”, but no further indications are provided on how to make such certifications. In Italy the ENAMA (National Board for Agricultural Mechanization) working group – established to co-ordinate the sprayers inspection activities at national level – has prepared a specific document containing the guidelines on how to get, on a voluntary basis, an ENAMA certification which attests the conformity of test equipment and of test procedures adopted in the inspection workshops. In this document directions are reported on how to assess the conformity of the inspection workshops to a set of listed requirements, referred either to other ENAMA documents, or to the National Action Plan, or to ISO/IEC 17020.The ENAMA certification of conformity therefore represents an added value for the sprayers inspection and calibrations Workshops as it ensures, through periodical inspections, that workshops apply the correct administrative (e.g. management of data and record of test reports) and technical procedures in their inspection activity and that they use appropriate test equipment and instruments. In this paper the requirements needed to get and to maintain over time the ENAMA certification of conformity are described

The benefit of permanent monitoring for seismic emergency management

In this paper, a framework based on Value of Information (VoI) theory from pre-posterior Bayesian decision analysis is applied to the case of post-earthquake emergency management of traffic restrictions for a bridge. The decision context is the following: the operator of a bridge is concerned about the use of the structure in post-earthquake scenarios and wishes to know if it is worth to install a Structural Health Monitoring (SHM) system which gives information about the state of the bridge. The possible choices about traffic restrictions after the seismic event are Open or Close the bridge. The benefit of SHM is computed based on VoI and the influence of significant variables involved in the decisional framework is investigated

P12.14: 4D/3D ultrasound‐guided embryo transfer

n/

The necessity of a harmonized procedure for sprayers inspectors training: the Italian activity

European Directive on Sustainable Use of Pesticides requires that the people making inspections of sprayers in use have an official license, recognized at national level, released by the competent Authority. In Italy, Authorities responsible of training and upgrading of sprayers inspectors are Regional and Provincial administrations. They make this job in collaboration with research institutes that provide qualified teachers.With the aim to homogenize in the whole country the activity of training and licensing of sprayers inspectors the rules for training courses and the criteria for releasing licenses have been defined by ENAMA. Training courses shall have a duration of at least 40 hours subdivided between theory (60% of total time) and practical (40% of total time).Topics treated during courses are: criteria to apply pesticides, main sprayer types used in agriculture and relative components, test methods and equipment used to carry out the inspections of sprayers in use and to adjust them. The exam to get the inspector license shall consist in: a) filling of a questionnaire with multiple answers (at least 80% of answers have to be correct); the questions are selected among a database approved by ENAMA Working Group; b) oral test; c) practical exam consisting in the complete inspection of one sprayer.In order to guarantee the same quality level of sprayers inspections in the different European countries and to guarantee the mutual recognition of inspections made it is considered necessary to reach in short terms an agreement to harmonize the activity of training, licensing and upgrading of sprayers inspectors across Europe