Anyonic Bogomol'nyi Solitons in a Gauged O(3) Sigma Model

We introduce the self-dual abelian gauged $O(3)$ sigma models where the Maxwell and Chern-Simons terms constitute the kinetic terms for the gauge field. These models have quite rich structures and various limits. Our models are found to exhibit both symmetric and broken phases of the gauge group. We discuss the pure Chern-Simons limit in some detail and study rotationally symmetric solitons.Comment: 14 pages, 6 Postscript figures uuencoded, written in REVTe

Magnetotransport in a bi-crystal film of La_0.7Sr_0.3MnO_3

Transport properties of an epitaxial film of La_0.7Sr_0.3MnO_3 (LSMO), deposited epitaxially on a LaAlO_3 bi-crystal substrate having a misorientation angle of 9.2 deg., have been studied. The film was patterned into a meander containing 100 grain boundaries. The resistivity of the sample exhibits two components; one originating from the grain boundary regions, and one from the LSMO elements in the meander; the latter contribution is similar to the resistivity of a reference epitaxial LSMO film. The low (<0.5 T) and high (up to 6 T) field magnetoresistance was also studied. The meander show a large low field magnetoresistance, increasing with decreasing temperature, and a constant high field slope of the magnetoconductance, results that are well explained by a two-step spin polarized tunneling model.Comment: ICM2000 contribution - 6 pages, 3 figure

Effects of stoichiometry, purity, etching and distilling on resistance of MgB2 pellets and wire segments

We present a study of the effects of non-stoichiometry, boron purity, wire diameter and post-synthesis treatment (etching and Mg distilling) on the temperature dependent resistance and resistivity of sintered MgB2 pellets and wire segments. Whereas the residual resistivity ratio (RRR) varies between RRR \~ 4 to RRR > 20 for different boron purity, it is only moderately affected by non-stoichiometry (from 20% Mg deficiency to 20% Mg excess) and is apparently independent of wire diameter and presence of Mg metal traces on the wire surface. The obtained set of data indicates that RRR values in excess of 20 and residual resistivities as low as rho{0} ~ 0.4 mu Ohm cm are intrinsic material properties of high purity MgB2

Waveform-level time-domain simulation comparison study of three shipboard power system architectures

Detailed waveform-level modeling and simulation of three alternative shipboard power system architectures is presented herein. The three system architectures are based on conventional 60Hz medium-voltage ac (MVAC), higherfrequency 240Hz medium-voltage ac (HFAC) and mediumvoltage dc (MVDC) technologies. To support the quantitative assessment and comparison of these three different power system architectures, each technology was modeled using a common representative, notional baseline ship. The baseline ship represents a multi-mission destroyer fitted with an 80MW next generation integrated power system (NGIPS). Modeling of each power system architecture is set forth along with simulation studies for three fault scenarios. Each of the three power system architectures was implemented within the MATLAB/ Simulink environment. Continuity of service was evaluated for each architecture along with a fault scenario using an operability metric. After a brief description of the three power system architectures and the operability metric, quantitative results are presented.Center for Electromechanic

Orbital effect of in-plane magnetic field on quantum transport in chaotic lateral dots

We show how the in-plane magnetic field, which breaks time-reversal and rotational symmetries of the orbital motion of electrons in a heterostructure due to the momentum-dependent inter-subband mixing, affects weak localisation correction to conductance of a large-area chaotic lateral quantum dot and parameteric dependences of universal conductance fluctuations in it.Comment: 4 pages with a figur

Effects of Boron Purity, Mg Stoichiometry and Carbon Substitution on Properties of Polycrystalline MgB2_{2}

By synthesizing MgB$_{2}$ using boron of different nominal purity we found values of the residual resistivity ratio ($RRR = R(300 K) / R(42 K)$) from 4 to 20, which covers almost all values found in literature. To obtain high values of $RRR$, high purity reagents are necessary. With the isotopically pure boron we obtained the highest $RRR \sim$ 20 for the stoichiometric compound. We also investigated Mg$_{x}$$^{11}$B$_{2}$ samples with 0.8 $< x <$ 1.2. For the range Mg$_{0.8}$$^{11}$B$_{2}$ up to Mg$_{1.2}$$^{11}$B$_{2}$ we found average values of $RRR$ between 14 and 24. For smaller variations in stoichiometry ($x=1\pm 0.1$) $RRR = 18 \pm 3$. All of our data point to the conclusion that high $RRR$ ($\sim 20$) and low $\rho_{0}$ ($\leq 0.4 \mu \Omega cm$) are intrinsic material properties associated with high purity MgB$_{2}$. In addition we have performed initial work on optimizing the formation of carbon doped MgB$_{2}$ via the use of B$_{4}$C. Nearly single phase material can be formed by reaction of nominal Mg(B$_{0.8}$C$_{0.2}$)$_{2}$ for 24 hours at $1200^{\circ}C$. The $T_{c}$ for this composition is between $21.9 K$ and $22.7 K$ (depending on criterion).Comment: accepted to Physica C, special MgB2 issu

A complete solution of a Constrained System: SUSY Monopole Quantum Mechanics

We solve the quantum mechanical problem of a charged particle on S^2 in the background of a magnetic monopole for both bosonic and supersymmetric cases by constructing Hilbert space and realizing the fundamental operators obeying complicated Dirac bracket relations in terms of differential operators. We find the complete energy eigenfunctions. Using the lowest energy eigenstates we count the number of degeneracies and examine the supersymmetric structure of the ground states in detail.Comment: 20 pages including the title, prepared in JHEP forma