Parametric study of lab-scale and pilot-scale biomass torrefaction for the production of woodstove briquettes

Conversion of torrefied olive residues to high-density briquettes is a potential solution to solid waste problems as well as to the lack of locally available fuel wood in Ireland. In this study, olive stones were torrefied at various temperatures and holding times in a fixed-bed reactor. Effects of process parameters such as heat treatment temperature from 200 to 300℃, residence time from 30 to 60 min, and particle size from 0.18 to 3 mm on the yield and composition of products were investigated and the results were compared with the mass balances from industrial-scale torrefaction plant at the Arigna Fuels (Carrick-on-Shannon, Ireland). The olive stones of larger particle size produced more liquid and gaseous products than smaller particles in a fixed bed reactor, whereas particle size had significantly less influence on the product yields than residence time and heat treatment temperature. The analysis of liquid products of the industrial-scale plant showed a greater content of heavy molecular products compared to the lab-scale pyrolysis using high-performance liquid chromatography and size exclusion chromatography techniques. New value-added products were developed from the tar compounds produced at the industrial-scale torrefaction plant. In addition, the lab-scale experiments showed that the ash content of torrefied biomass significantly increased with the increased feedstock particle size. The torrefied olive stones briquettes using different binders were tested in a conventional woodstove. Torrefaction of olive stones has been found to reduce the emissions by approximately 60% compared to the non-treated feedstock. This demonstrates that torrefaction has good potential as a cost-effective and sustainable process for the production of woodstove briquettes from low-quality feedstocks

Scientific Assessment in Support of the Materials Roadmap Enabling Low Carbon Energy Technologies: Bioenergy

This scientific assessment serves as the basis for a materials research roadmap for bioenergy technology, itself an integral element of an overall "Materials Roadmap Enabling Low Carbon Technologies", a Commission Staff Working Document published in December 2011. The Materials Roadmap aims at contributing to strategic decisions on materials research funding at European and Member State levels and is aligned with the priorities of the Strategic Energy Technology Plan (SET-Plan). It is intended to serve as a guide for developing specific research and development activities in the field of materials for energy applications over the next 10 years. This report provides an in-depth analysis of the state-of-the-art and future challenges for energy technology-related materials and the needs for research activities to support the development of bioenergy technology both for the 2020 and the 2050 market horizons. It has been produced by independent and renowned European materials scientists and energy technology experts, drawn from academia, research institutes and industry, under the coordination the SET-Plan Information System (SETIS), which is managed by the Joint Research Centre (JRC) of the European Commission. The contents were presented and discussed at a dedicated hearing in which a wide pool of stakeholders participated, including representatives of the relevant technology platforms, industry associations and the Joint Programmes of the European Energy Research Associations.JRC.F.2-Cleaner energ

Influence of the pyrolysis temperature on fresh and pelletised chicken litter with focus on sustainable production and utilisation of biochar

This study focused on determining the influence of temperature (500–700 °C) during pyrolysis of pelletised chicken litter (PCL) and fresh chicken litter (FCL). The composition of all pyrolysis products was analysed, and their potential applications were discussed. An analysis of phosphorus speciation in FCL and PCL along with their derived biochars revealed that the share of water-soluble phosphorus was greatly reduced in the biochar, implying lower risk of eutrophication in agricultural applications of biochar when used as a soil improver. Indeed, water-soluble phosphorus decreased from 60% for PCL to as low as 3% for the biochars. In addition, the concentration of other nutrients and heavy metals in biochar, and its potential for agriculture application was discussed. Heavy metals content was below the upper limits set out in the European Fertilising Products Regulation only for biochars produced at 500 °C, but biochars produced at higher temperatures did not meet the limits for Zn and Ni content. The energy balance analysis showed that pelletisation of chicken litter is not necessary, as the properties of both PCL and FCL allow for energetically sustainable pyrolysis when hot pyrolysis gas is combusted, and biochar recovered for nutrient recycling

Use of Patient-Reported Outcomes to Understand & Measure the Patient Experience of Novel Cell and Gene Therapies

Patient reported outcomes (PROs) are the gold standard for assessing patients’ experience of treatment in oncology, defined in the 21st Century Cures Act as information about patients’ experiences with a disease or condition, including the impact of a disease or condition, or a related therapy or clinical investigation on patients’ lives; and patient preferences with respect to treatment of their disease or condition [1]. PROs provide a comprehensive assessment of the benefits and risks of new medical products, as well as essential data to inform real-world use. Although RCTs are the ultimate source for information for evaluating products in development, they are not always feasible for rare diseases with few or no effective treatment options available. Thus, it is important to consider other measures that can help to improve the strength of evidence for cell and gene therapies targeting rare indications. While collection of PROs and other patient experience endpoints does not resolve the difficulty of conducting trials in small populations, doing so contributes empirical evidence that informs both product development and patient access. Additionally, including routine collection of PROs in registries may provide supplemental data to further characterize the benefit:risk profile of cell and gene therapies at follow-up times that would be infeasible to operationalize in a clinical trial setting

A Review of the Design Process for Implantable Orthopedic Medical Devices

The design process for medical devices is highly regulated to ensure the safety of patients. This paper will present a review of the design process for implantable orthopedic medical devices. It will cover the main stages of feasibility, design reviews, design, design verification, manufacture, design validation, design transfer and design changes

Utilisation of poultry litter as an energy feedstock

peer-reviewedThis paper examines poultry litter (PL) as a resource in fuel quality terms and illustrates how the small scale application of fluidised bed technology solves both energy and waste problems, while producing a nutrient rich ash. PL was found to have a higher heating value (HHV) of 18 GJ t−1 on a dry basis (db). On an as received basis (ar), it had an ash mass fraction of 9% and the elemental phosphorous content of the ash was 110 g kg−1. The resultant mineral matter can be utilised as a nutrient substitute for mineral fertiliser

A Statistical Study of Galactic SNRs using the PMN Survey

The Parkes-MIT-NRAO (PMN) radio survey has been used to generate a quasi all-sky study of Galactic Supernova Remnants (SNRs) at a common frequency of 4.85 GHz. We present flux densities estimated for the sample of 110 Southern Galactic SNRs (up to Dec = - 65 deg.) observed with the Parkes 64-m radio telescope and an additional sample of 54 from the Northern PMN (up to Dec = +64 deg.) survey undertaken with the Green Bank 43-m (20 SNRs) and 91-m (34 SNRs) radio telescopes. Out of this total sample of 164 selected SNRs (representing 71% of the 231 known SNRs in the Green catalogue) we consider 138 to provide reliable estimates of flux density and surface brightness distribution. This sub-sample represents those SNRs which fall within carefully chosen selection criteria which minimises the effects of the known problems in establishing reliable fluxes from the PMN survey data. Our selection criteria are based on a judicious restriction of source angular size and telescope beam together with careful evaluation of fluxes on a case by case basis. This gives confidence in the newly derived PMN fluxes when the selection criteria are respected. We find a sharp drop off in the flux densities for Galactic SNRs beyond 4 Jy and then a fairly flat distribution from 5-9 Jy, a slight decline and a further flat distribution from 9-20 Jy though the numbers of SNR in each Jy bin are low. We also re-visit the contentious Sigma-D relation to determine a new power law index for a sub-sample of shell type SNRs which yields beta= -2.2 +/- 0.6. This new evaluation of the Sigma-D relation, applied to the restricted sample, provides new distance estimates and their Galactic scale height distribution. We find a peak in the SNR distribution between 7-11 kpc with most restricted to +/- 100 pc Galactic scale height.Comment: 14 pages, 7 figures. Accepted for publishing in Astrophysics and Space Scienc

Just One of the ‘PIIGS’ or a European Outlier? Studying Irish Emigration from a Comparative Perspective

The return of high levels of emigration has become one of the most debated and sensitive social topics in Ireland in recent years. But Irish emigration continues to be discussed in the singular rather than the plural. This paper compares Irish emigration to other Eurozone states that also encountered serious economic difficulties following the onset of the global financial crisis to highlight international trends and specify national differences. All of the ‘PIIGS’ experienced increased emigration after the crisis. Yet Irish citizens left in much greater numbers per capita than their Eurozone counterparts, with only Portugal bearing any similarities. This was because Irish emigrants possessed valuable transnational human, cultural and social capital that enabled them to access liberal labour markets outside the Eurozone. They possessed skills desired by attractive destination states; they spoke the same language and shared similar cultural traits as their hosts; and they were able to call upon recently renewed Irish networks to further facilitate their move abroad.Seventh Framework Programme (FP7)info:eu-repo/grantAgreement/EC/FP7/332409Cities, Migration and Global Interdependenc

Comparing Presenting Clinical Features in 48 Children With Microscopic Polyangiitis to 183 Children Who Have Granulomatosis With Polyangiitis (Wegener's) : an ARChiVe Cohort Study

OBJECTIVE: To uniquely classify children with microscopic polyangiitis (MPA), to describe their demographic characteristics, presenting clinical features, and initial treatments in comparison to patients with granulomatosis with polyangiitis (Wegener's) (GPA). METHODS: The European Medicines Agency (EMA) classification algorithm was applied by computation to categorical data from patients recruited to the ARChiVe (A Registry for Childhood Vasculitis: e-entry) cohort, with the data censored to November 2015. The EMA algorithm was used to uniquely distinguish children with MPA from children with GPA, whose diagnoses had been classified according to both adult- and pediatric-specific criteria. Descriptive statistics were used for comparisons. RESULTS: In total, 231 of 440 patients (64% female) fulfilled the classification criteria for either MPA (n\u2009=\u200948) or GPA (n\u2009=\u2009183). The median time to diagnosis was 1.6 months in the MPA group and 2.1 months in the GPA group (ranging to 39 and 73 months, respectively). Patients with MPA were significantly younger than those with GPA (median age 11 years versus 14 years). Constitutional features were equally common between the groups. In patients with MPA compared to those with GPA, pulmonary manifestations were less frequent (44% versus 74%) and less severe (primarily, hemorrhage, requirement for supplemental oxygen, and pulmonary failure). Renal pathologic features were frequently found in both groups (75% of patients with MPA versus 83% of patients with GPA) but tended toward greater severity in those with MPA (primarily, nephrotic-range proteinuria, requirement for dialysis, and end-stage renal disease). Airway/eye involvement was absent among patients with MPA, because these GPA-defining features preclude a diagnosis of MPA within the EMA algorithm. Similar proportions of patients with MPA and those with GPA received combination therapy with corticosteroids plus cyclophosphamide (69% and 78%, respectively) or both drugs in combination with plasmapheresis (19% and 22%, respectively). Other treatments administered, ranging in decreasing frequency from 13% to 3%, were rituximab, methotrexate, azathioprine, and mycophenolate mofetil. CONCLUSION: Younger age at disease onset and, perhaps, both gastrointestinal manifestations and more severe kidney disease seem to characterize the clinical profile in children with MPA compared to those with GPA. Delay in diagnosis suggests that recognition of these systemic vasculitides is suboptimal. Compared with adults, initial treatment regimens in children were comparable, but the complete reversal of female-to-male disease prevalence ratios is a provocative finding

A comparative study of thermally and chemically treated dairy waste: Impacts on soil phosphorus turnover and availability using 33P isotope dilution

peer-receivedDairy processing sludge (DPS) and DPS-derived secondary products such as struvite, biochar, hydrochar and ash (collectively known as SRUBIAS) are emerging as alternatives to fertilizers produced from mined rock phosphate. However, little is known about how these products affect soil P availability and daily P turnover rates.. A lack of such information prevents precision nutrient management planning using these products out on farms. This study used a novel isotope dilution technique (IPD) with 33P as a tracer to compare P turnover in soils amended with chemically (alum-treated DPS and struvite) and thermally (biochar, hydrochar, ash) treated DPS. Results showed that thermally treated products exhibited poor agronomic performance as P fertilizers, potentially inhibiting P availability when applied to soils. For example, a P deficient soil amended with hydrochar treatment at the highest application rates did not record a build-up of available P to agronomic target values. In ash and biochar treated P deficient soils, available P increased but only with very high application rates of 150 and 80 mg P kg −1. The application of these products as fertilizers could have negative implications for both environmental and agronomic goals. Conversely, chemically treated fertilisers demonstrated better agronomic performance. The same agronomic target value was reached with application rates of only 20 mg P kg −1 soil for DPS and 50 mg P kg −1 soil for struvite. However, the techniques deployed revealed that these products exhibited slower rates of available and exchangeable P build-up when compared with chemical fertilisers. This suggests that these bio-based alternatives require higher application rates or earlier application times compared to conventional chemical fertilizers. Regulations providing advice on P use in agricultural soils need to account for slower P turnover in soils receiving recycled fertilizers. The IPD technique is transferrable to all wastes to examine their performance as fertilizers.Horizon 202