693 research outputs found
Optimization of technological parameters in ultrasonic welding of the polypropylene fabric using Taguchi and FCCCD methods
Ultrasonic welding is a welding method that has been applied for welding nonwoven fabrics, with many advantages such as fast speed, high reliability, easy automation and especially less pollution to the environment. This paper studies the optimization of technological parameters in the welding process such as welding time, pressure, and weld shape on the breaking strength of ultrasonic welding of Polypropylene (PP) nonwovens. To evaluate the influence level and find the reasonable technological parameters domain in the paper, the Taguchi method is used in combination with the face-centered central composite design (FCCCD) response surface method. The research results have determined the regression equations used to calculate the breaking strength for each weld shape as well as the optimal domain for the main technological parameters, ensuring the breaking strength of the weld. There are different degrees of influence of technological parameters (shape of the weld zone, welding time and welding pressure) on the breaking strength of ultrasonic welds. Among them, the influence level of welding time t is 45.31 %, the weld shape is Pattern 2 with the rate of 30.03 %, and the welding pressure is 24.66 %. Carrying out a verification test with the welding parameters: t=1.6 s, p=3.1 kgf/cm2, two patterns ( Pattern 2 and Pattern 3), the result of breaking strength for patterns was achieved. Pattern 2 has a difference of 1.19 % between the regression equation results and the actual experimental results, while the figure for Pattern 3 is 0.77 %. From these results, it is possible to select the appropriate technological parameters for ultrasonic welding equipment when processing products from nonwoven fabrics to ensure the highest quality and productivit
Application of Microscopic Simulation to Evaluate the Safety Performance of Freeway Weaving Sections
This study adopted the traffic conflict technique, investigated and applied it for evaluation of freeway weaving section safety performance. Conflicts between vehicles were identified based on the state of interactions between vehicles in the traffic stream at microscopic level. The VISSIM microscopic simulation model was employed to simulate traffic operation. Surrogate safety measures were formulated based on deceleration rate required to avoid crash and these simulation-based measures were statistically compared and validated using crash data collected from the same study site. Three study sites located in Houston and Dallas areas were selected. Geometric and traffic data were collected using various technique including the use of traffic surveillance cameras and pneumatic tubes. The study revealed the existence of links between actually observed crashes and the surrogate safety measures. The study findings support the possible the use of microscopic simulation to evaluate safety performance of weaving areas and other transportation facilities
The Relationships between Commodity Prices, Firm Performance and Stock Valuation: An Empirical Evidence from Malaysia and Singapore
The study estimates the commodity prices and firm performance risk exposures of the Malaysian and Singaporean plantation and other related commodities’ sectors, using the Ohlson (1995)’s, Easton and Harris (1991)’s and other related asset prices together with return models augmented with accounting factors. Results show that the firm performance factors affect significantly and strongly stock valuation. However, the commodity prices affect determinants of firm performance and stock valuation weakly. The study also finds that both the commodity prices and firm performance together affect stock prices more significantly than the stock returns do. However, both of the constructed models which show the impacts of commodity prices and firm performance on stock valuation have better explanation than Ohlson (1995)’s and Easton and Harris (1991)’s models. This study proves that the relationships among commodity prices, firm performance and stock valuation of plantation and agriculture sectors are more considerable than other sectors’ over time
Towards green growth in Vietnam: the case of marine capture fisheries
The objective of this study is to assess sustainable development and the potential for green growth of the marine capture fisheries in Vietnam. We use “standard” bio-economic models with additional terms to correct some of ecosystem externalities and to define reference points for the fisheries. The results show that Vietnam’s marine capture fisheries are unsustainable and the fishing effort needs to be reduced about 0.35 and 0.39 of present effort in order to achieve the maximum sustainable yield and maximum economic yield, respectively. If ecosystem externalities are taken into account, the situation is even worse. The potential for green growth in the fisheries is estimated to be about 7.3 billion USD, higher than the export value for fisheries and aquaculture products in Vietnam in 2016. Green growth policies for the fisheries include public subsidies to environmentally friendly industries, reducing the “trash” fish catch and more efficient regulations more effectively enforced
CAMELLIA PYRIFORMIS (THEACEAE, SECTION CALPANDRIA), A NEW SPECIES FROM NORTHERN VIETNAM
Camellia pyriformis is described, illustrated, and placed in section Calpandria. Morphological features of this new species are young branches villous; leaves above pubescent, a long midrib, below pubescent; petiole falcate, densely villous; flowers solitary or geminate; pedicel very short, pubescent; bracteoles sparsely pubescent on both sides; sepals, pubescent on both sides; petals, white, glabrous; androecium 5–6 stamens, filaments completely united to form a truncated cone, glabrous, basal adnate to the petal, shallowly dentate at the apex, each filament bearing an anther; gynoecium 3-locular, densely white silky strigose tomentose, styles glabrous; capsule pyriform, pubescent; seed broad pyriform, densely villou
A Robust Mobile Robot Navigation System using Neuro-Fuzzy Kalman Filtering and Optimal Fusion of Behavior-based Fuzzy Controllers
This study proposes a control system model for mobile robots navigating in unknown environments. The proposed model includes a neuro-fuzzy Extended Kalman Filter for localization task and a behaviorbased fuzzy multi-controller navigation module. The neuro-fuzzy EKF, used for estimating the robot’s position from sensor readings, is an enhanced EKF whose noise covariance matrix is progressively adjusted by a fuzzy neural network. The navigation module features a series of independently-executed fuzzy controllers, each deals with a specific navigation sub-task, or behavior, and a multi-objective optimizer to coordinate all behaviors. The membership functions of all fuzzy controllers play the roles of objective functions for the optimizer, which produces an overall Pareto-optimal control signal to drive the robot. A number of simulations and real-world experiments were conducted to evaluate the performance of this model
Vitali's theorem without uniform boundedness
Let {fm}m≥1 be a sequence of holomorphic functions defined on a bounded domain D ⊂ Cn or a sequence of rational functions (1 ≤ deg rm ≤ m) defined on Cn. We are interested infinding sufficient conditions to ensure the convergence of {fm}m≥1 on a large set provided the convergence holds pointwise on a not too small set. This type of result is inspired from a theorem of Vitali which gives a positive answer for uniformly bounded sequence
Factors affecting the adoption of climate-smart aquaculture (CSAq) in the North Central Coast of Vietnam
Climate-smart aquaculture (CSAq) is considered an appropriate and effective adaptation approach for the coastal aquaculture sector under the climate change phenomenon. This study, applying probit model, aims to assess the influence of several factors on the farmers’ decision to apply CSAq practices in extensive coastal shrimp farming. Data were collected from interviews with 200 households who have both already applied and have yet to apply CSAq practices in five coastal districts of Thanh Hoa Province. The results showed six key factors that influenced the decision of the farmers to apply CSAq practices: availability of household labor; access to information on CSAq practices; market price of products applying CSAq practices; economic efficiency; ability to ensure food security; and improved pond environment when applying CSAq practices. These factors explained 69.41% of their decision to apply CSAq, among which economic efficiency had the greatest impact (30.2%). Market prices and access to information about CSAq are also important factors with respective levels of influence at 16.0% and 14.9%. The result implies that strengthening access to CSAq information and improving technical understanding of CSAq practices are important solutions to upscale CSAq in the North Central Coast of Vietnam
- …