322 research outputs found

    AMPHIBIAN AND REPTILE COLONIZATION OF RECLAIMED COAL SPOIL GRASSLANDS

    Get PDF
    While habitat loss is a major driver of amphibian and reptile declines globally, a subset of post-industrial landscapes, reclaimed and restored, are creating habitat for these animals. In a previous work, we showed that amphibians and reptiles use reclaimed and restored grasslands. In the present work we quantify captures at drift-fence/pitfall trap arrays over two consecutive years and show that several species of amphibians are not only successfully reproducing but that juveniles are being recruited into the population. In particular, 15,844 amphibians and 334 reptiles representing 25 species (14 amphibians, 11 reptiles) were captured at drift fences in 2009 and 2010. Nine additional reptile species were found opportunistically while conducting other research activities at the study site. Out of a total of 8,064 metamorphosing juveniles we detected 126 malformations, a 1.6% rate. The major malformation types were limbs missing (amelia) or foreshortened (ectromely), eye discolorations, and digits foreshortened (ectrodactyly) or small (brachydactyly). Our data show that reclaimed, restored, and properly managed landscapes can support reproducing populations of amphibians and reptiles with low malformation rates, including species in decline across other portions of their range

    Protection strategies for next generation passive optical networks -2

    Get PDF
    Next Generation Passive Optical Networks-2 (NGPON2) are being considered to upgrade the current PON technology to meet the ever increasing bandwidth requirements of the end users while optimizing the network operators' investment. Reliability performance of NG-PON2 is very important due to the extended reach and, consequently, large number of served customers per PON segment. On the other hand, the use of more complex and hence more failure prone components than in the current PON systems may degrade reliability performance of the network. Thus designing reliable NG-PON2 architectures is of a paramount importance. Moreover, for appropriately evaluating network reliability performance, new models are required. For example, the commonly used reliability parameter, i.e., connection availability, defined as the percentage of time for which a connection remains operable, doesn't reflect the network wide reliability performance. The network operators are often more concerned about a single failure affecting a large number of customers than many uncorrelated failures disconnecting fewer customers while leading to the same average failure time. With this view, we introduce a new parameter for reliability performance evaluation, referred to as the failure impact. In this paper, we propose several reliable architectures for two important NGPON2 candidates: wavelength division multiplexed (WDM) PON and time and wavelength division multiplexed (TWDM) PON. Furthermore, we evaluate protection coverage, availability, failure impact and cost of the proposed schemes in order to identify the most efficient protection architecture

    Energy-efficiency improvements for optical access

    Get PDF
    This article discusses novel approaches to improve energy efficiency of different optical access technologies, including time division multiplexing passive optical network (TDM-PON), time and wavelength division multiplexing PON (TWDM-PON), point-to-point (PTP) access network, wavelength division multiplexing PON (WDM-PON), and orthogonal frequency division multiple access PON (OFDMA-PON). These approaches include cyclic sleep mode, energy-efficient bit interleaving protocol, power reduction at component level, or frequency band selection. Depending on the target optical access technology, one or a combination of different approaches can be applied

    Functional methods in the theory of magnetoimpurity states of electrons in quantum wires

    Full text link
    Functional methods are used to study magnetoimpurity states of electrons in nanostructures. The Keldysh formalism is applied to these states. The theory is illustrated using a quantum wire sample with impurity atoms capable of localizing electrons in a magnetic field. The characteristics of magnetoimpurity states of electrons in the wire are calculated using the model of a Gaussian separable potential.Comment: 15 pages, 1 figur

    Electron transport via local polarons at interface atoms

    Get PDF
    Electronic transport is profoundly modified in the presence of strong electron-vibration coupling. We show that in certain situations, the electron flow takes place only when vibrations are excited. By controlling the segregation of boron in semiconducting Si(111)-3√×3√R30° surfaces, we create a type of adatom with a dangling-bond state that is electronically decoupled from any other electronic state. However, probing this state with scanning tunnelling microscopy at 5 K yields high currents. These findings are rationalized by ab-initio calculations that show the formation of a local polaron in the transport process

    Geometric versus geographic models for the estimation of an FTTH deployment

    Get PDF
    Optical access networks provide a future proof platform for a wide range of services, and today, several operators are deploying fibre to the home (FTTH) networks. Installing an FTTH infrastructure, however, involves very high investment cost. Therefore, a good estimation of the investment cost is important for building a successful business strategy and, consequently, to speed up the FTTH penetration. In this paper, for calculating the amount of cable and fibre in the outside plant together with the associated civil works, and the number of required network elements, two different approaches are investigated: (1) geometric modelling of the fibre plant based on approximate mathematical models and (2) geographic modelling of the fibre plant based on map-based geospatial data. The results obtained from these two approaches can then be used as input for preliminary investment cost calculations and/or techno-economic evaluations. Compared to more complex and accurate geographic modelling, we verify that especially with uneven population density and irregular street system, simple geometric models do not provide accurate results. However, if no geospatial data is available or a fast calculation is desired for a first estimation, geometric models definitely have their relevance. Based on the case studies presented in this paper, we propose some important guidelines to improve the accuracy of the geometric models by eliminating their main distortion factors

    Geographic model for cost estimation of FTTH deployment: overcoming inaccuracy in uneven-populated areas

    Get PDF
    A geographic approach is proposed to accurately estimate the cost of FTTH networks. In contrast to the existing geometric models, our model can efficiently avoid inaccurate estimation of the fibre infrastructure cost in the uneven-populated areas

    Toward reliable hybrid WDM/TDM passive optical networks

    Get PDF
    Individual users and enterprises are increasingly relying on the access to internet services and cannot accept long interruption time as easily as before. Moreover, the main characteristics of next generation optical access (NGOA) networks, such as long reach and a large number of users per feeder line, turn the network reliability to an important design parameter to offer uninterrupted service delivery. In this regard, protection mechanisms become one of the crucial aspects that need to be considered in the design process of access networks. On the other hand, it should be noted that not all users can afford to pay a high extra cost for protection; hence, it is important to provide resilience in a cost-efficient way. A PON combining WDM and TDM technologies, referred to as hybrid WDM/TDM PON or HPON, is one of the most promising candidates for NGOA networks due to its ability to serve a large number of subscribers and offer high capacity per user. For these reasons, in this article, we propose HPON architecture offering different degrees of resilience depending on the user profiles (i.e., partial and full protection for residential and business access, respectively). Also, the investment cost of providing resilience for the proposed schemes is investigated considering various protection upgrade road maps. Our results confirm that protecting the shared part of network with a large number of users is required in order to keep the failure impact at an acceptable level, with less than 5 percent increase of investment cost compared to the unprotected case. Meanwhile, the proposed end-to-end protection for business users considerably reduces the risk of service interruption for this type of demanding user without a need to duplicate the deployment cost of an unprotected connection. Furthermore, a sensitivity analysis is performed to investigate the impact of changes in business user percentage and protection upgrade time on the deployment cost. The results may be used as advice on cost-efficient deployment of reliable fiber access networks

    SARS-CoV2 (COVID-19) infection: is fetal surgery in times of national disasters reasonable?

    Get PDF
    Even though the global COVID‐19 pandemic may affect how medical care is delivered in general, most countries try to maintain steady access for women to routine pregnancy care, including fetal anomaly screening. This means that, also during this pandemic, fetal anomalies will be detected, and that discussions regarding invasive genetic testing and possibly fetal therapy will need to take place. For patients, concerns about Severe Acute Respiratory Syndrome‐Corona Virus 2 will add to the anxiety caused by the diagnosis of a serious fetal anomaly. Yet, also for fetal medicine teams the situation gets more complex as they must weigh up the risks and benefits to the fetus as well as the mother, while managing a changing evidence base and logistic challenges in their healthcare system

    Reversal of the Charge Transfer between Host and Dopant Atoms in Semiconductor Nanocrystals

    Full text link
    We present ab initio density functional calculations that show P (Al) dopant atoms in small hydrogen-terminated Si crystals to be negatively (positively) charged. These signs of the dopant charges are reversed relative to the same dopants in bulk Si. We predict this novel reversal of the dopant charge (and electronic character of the doping) to occur at crystal sizes of order 100 Si atoms. We explain it as a result of competition between fundamental principles governing charge transfer in bulk semiconductors and molecules and predict it to occur in nanocrystals of most semiconductors.Comment: 4 pages, 4 figures (3 in color), 2 table
    corecore