Lobbying for agroforestry in the EU

Presentatio

Decay of scalar variance in isotropic turbulence in a bounded domain

The decay of scalar variance in isotropic turbulence in a bounded domain is investigated. Extending the study of Touil, Bertoglio and Shao (2002; Journal of Turbulence, 03, 49) to the case of a passive scalar, the effect of the finite size of the domain on the lengthscales of turbulent eddies and scalar structures is studied by truncating the infrared range of the wavenumber spectra. Analytical arguments based on a simple model for the spectral distributions show that the decay exponent for the variance of scalar fluctuations is proportional to the ratio of the Kolmogorov constant to the Corrsin-Obukhov constant. This result is verified by closure calculations in which the Corrsin-Obukhov constant is artificially varied. Large-eddy simulations provide support to the results and give an estimation of the value of the decay exponent and of the scalar to velocity time scale ratio

Antibacterial, antioxidant and anti-proliferative properties and zinc content of five south Portugal herbs

Context: Crataegus monogyna L. (Rosaceae) (CM), Equisetum telmateia L. (Equisataceae) (ET), Geranium purpureum Vil. (Geraniaceae) (GP), Mentha suaveolens Ehrh. (Lamiaceae) (MS), and Lavandula stoechas L. spp. luisieri (Lamiaceae) (LS) are all medicinal. Objective: To evaluate the antioxidant, antiproliferative and antimicrobial activities of plant extracts and quantify individual phenolics and zinc. Material and methods: Aerial part extracts were prepared with water (W), ethanol (E) and an 80% mixture (80EW). Antioxidant activity was measured with TAA, FRAP and RP methods. Phenolics were quantified with a HPLC. Zinc was quantified using voltammetry. Antibacterial activity (after 48 h) was tested using Enterococcus faecalis, Bacillus cereus, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Listeria monocytogenes. Antiproliferative activity (after 24 h) was tested using HEP G2 cells and fibroblasts. Results: Solvents influenced results; the best were E and 80EW. GP had the highest antioxidant activity (TAA and FRAP of 536.90mg AAE/g dw and 783.48mg TE/g dw, respectively). CM had the highest zinc concentration (37.21 mg/kg) and phenolic variety, with neochlorogenic acid as the most abundant (92.91 mg/100 g dw). LS was rich in rosmarinic acid (301.71 mg/100 g dw). GP and LS inhibited the most microorganisms: B. cereus, E. coli and S. aureus. GP also inhibited E. faecalis. CM had the lowest MIC: 5830 mu g/mL. The antibacterial activity is explained by the phenolics present. LS and CM showed the most significant anti-proliferative activity, which is explained by their zinc content. Conclusion: The most promising plants for further studies are CM, LS and GP.FCT, Fundacao para a Ciencia e a Tecnologia of Portugal [SFRH/BSA/139/2014

A comparative study of the antimicrobial and antioxidant activities of Inonotus hispidus fruit and their mycelia extracts

Inonotus hispidus (Bull.) P. Karst. has been used as traditional medicine for the treatment of dyspepsia, cancer, and diabetes. Numerous studies have confirmed the antimicrobial, antiviral, antioxidant, anti-inflammatory, immunomodulatory, antiproliferative and cytotoxic biological activities of extracts from this species. The purpose of this study was a comparative analysis of the antioxidant and the antimicrobial activities of methanol extracts from fruit and liquid-cultured mycelia. Four compounds (N-butylbenzenesulfonamide, lauramidopropyl betaine, 3,5-di-tert-butyl-4-hydroxybenzaldehyde, and uplandicine), determined by hybrid HRMS, were found only in mycelia culture extracts. Free radical scavenging, measured by DPPH assay on methanol extracts, showed an activity of about 17.2% and 22.1% of Trolox in fruiting bodies and mycelia, respectively. The I. hispidus methanol extracts from fruit and mycelia culture were found to have varying degrees of antibacterial and antifungal effects against the pathogenic microorganisms tested (minimum inhibitory concentration from 0.17 to 2.56 μg mL−1)

Operating a full tungsten actively cooled tokamak: overview of WEST first phase of operation

WEST is an MA class superconducting, actively cooled, full tungsten (W) tokamak, designed to operate in long pulses up to 1000 s. In support of ITER operation and DEMO conceptual activities, key missions of WEST are: (i) qualification of high heat flux plasma-facing components in integrating both technological and physics aspects in relevant heat and particle exhaust conditions, particularly for the tungsten monoblocks foreseen in ITER divertor; (ii) integrated steady-state operation at high confinement, with a focus on power exhaust issues. During the phase 1 of operation (2017–2020), a set of actively cooled ITER-grade plasma facing unit prototypes was integrated into the inertially cooled W coated startup lower divertor. Up to 8.8 MW of RF power has been coupled to the plasma and divertor heat flux of up to 6 MW m−2 were reached. Long pulse operation was started, using the upper actively cooled divertor, with a discharge of about 1 min achieved. This paper gives an overview of the results achieved in phase 1. Perspectives for phase 2, operating with the full capability of the device with the complete ITER-grade actively cooled lower divertor, are also described

Synthetic approaches to artificial photosynthesis: general discussion

Metals in Catalysis, Biomimetics & Inorganic Material

ALK-positive histiocytosis: a new clinicopathologic spectrum highlighting neurologic involvement and responses to ALK inhibition

ALK-positive histiocytosis is a rare subtype of histiocytic neoplasm first described in 2008 in three infants with multisystemic disease involving the liver and hematopoietic system. This entity has subsequently been documented in case reports and series to occupy a wider clinicopathologic spectrum with recurrent KIF5B-ALK fusions. The full clinicopathologic and molecular spectra of ALK-positive histiocytosis remain, however, poorly characterized. Here, we describe the largest study of ALK-positive histiocytosis to date, with detailed clinicopathologic data of 39 cases, including 37 cases with confirmed ALKrearrangements. The clinical spectrum comprised distinct clinical phenotypic groups: infants with multisystemic disease with liver and hematopoietic involvement, as originally described (Group 1A: 6/39), other patients with multisystemic disease (Group 1B: 10/39), and patients with single-system disease (Group 2: 23/39). Nineteen patients of the entire cohort (49%) had neurologic involvement (seven and twelve from Groups 1B and 2, respectively). Histology included classic xanthogranuloma features in almost one third of cases, whereas the majority displayed a more densely cellular, monomorphic appearance without lipidized histiocytes but sometimes more spindled or epithelioid morphology. Neoplastic histiocytes were positive for macrophage markers and often conferred strong expression of phosphorylated-ERK, confirming MAPK pathway activation. KIF5B-ALK fusions were detected in 27 patients, while CLTC-ALK, TPM3-ALK, TFG-ALK, EML4-ALK and DCTN1-ALK fusions were identified in single cases. Robust and durable responses were observed in 11/11 patients treated with ALK inhibition, ten with neurologic involvement. This study presents the existing clinicopathologic and molecular landscape of ALK-positive histiocytosis, and provides guidance for the clinical management of this emerging histiocytic entity.Molecular tumour pathology - and tumour genetic

Fracture Stress in Compression of TiB2 : Strain Rate Sensibility and Modeling

The aim of this study consists in developing a simple model which could evaluate the fracture stress, in uniaxial compressive loadings, of brittle materials, like ceramics. We first prove that fracture stress of a polycristalline TiB2 is independent of strain rate. Then, we present a modeling of this stress based on fracture mechanics principles and which parameters are the toughness, the porosity rate, the pores size and their shape, i.e. material intrinsic values.Le but de cette étude est de développer un modèle simple capable d'évaluer la contrainte à rupture en compression uniaxiale d'un matériau fragile, telle une céramique. Nous allons montrer dans un premier temps que la contrainte à rupture d'un TiB2 polycristallin ne dépend pas de la vitesse de déformation. Ensuite, nous présentons une modélisation de cette contrainte basée sur des principes de mécanique de la rupture et dont les paramètres sont la ténacité du matériau, le taux de porosité, la taille des pores et leur forme, i.e. des grandeurs intrinsèques au matériau

Étude de la transition fragile-ductile d'un tungstène

The aim of this study consists in analyzing the ductile-brittle transition temperature of a sintered tungsten. We lay emphasis on the appraisal of the influence of the triaxial stress state, of the strain rate and of the applied loading direction on the transition temperature. A simple modeling based on local competition between cleavage stress and theorical elastic yield stress is presented. It allows to appraise the transition temperature of a material under any loading condition.L'étude présentée a pour but d'analyser la température de transition fragile ductile d'un tungstène fritté. Nous insistons sur l'évaluation de l'influence d'un champ triaxial de contraintes, de la vitesse de déformation et de la direction de chargement sur la température de transition. Une modélisation simple basée sur la compétition locale entre la contrainte de clivage et la limite d'élasticité théorique est présentée. Elle permet d'évaluer la température de transition d'un matériau soumis à un chargement quelconque