Inter-laminar shear stress in hybrid CFRP/austenitic steel

Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research concluded that higher bearing strengths in composite bolted joints can be achieved by a CFRP/ Titanium hybrid lay-up in the vicinity of the bolted joint. The high costs of titanium motivate a similar research with the more cost competitive austenitic steel. An experimental program was performed in order to compare the apparent inter-laminar shear stress (ILSS) of a CFRP reference beam with the ILSS of hybrid CFRP/Steel beams utilizing different surface treatments in the metallic ply. The apparent ILSS was determined by short beam test, a three-point bending test. Finite element models using cohesive elements in the CFRP/Steel interface were built to simulate the short beam test in the reference beam and in the highest interlaminar shear stress hybrid beam. The main parameters for a FEM simulation of inter laminar shear are the cohesive elements damage model and appropriate value for the critical energy release rate. The results show that hybrid CFRP/Steel have a maximum ILSS very similar to the ILSS of the reference beam. Hybrid CFRP/Steel is a competitive solution when compared with the reference beam ILSS. FEM models were able to predict the maximum ILSS in each type of beam

NEW SEISMIC SOURCE ZONE MODEL FOR PORTUGAL AND AZORES

The development of seismogenic source models is one of the first steps in seismic hazard assessment. In seismic hazard terminology, seismic source zones (SSZ) are polygons (or volumes) that delineate areas with homogeneous characteristics of seismicity. The importance of using knowledge on geology, seismicity and tectonics in the definition of source zones has been recognized for a long time [1]. However, the definition of SSZ tends to be subjective and controversial. Using SSZ based on broad geology, by spreading the seismicity clusters throughout the areal extent of a zone, provides a way to account for possible long-term non-stationary seismicity behavior [2,3]. This approach effectively increases seismicity rates in regions with no significant historical or instrumental seismicity, while decreasing seismicity rates in regions that display higher rates of seismicity. In contrast, the use of SSZ based on concentrations of seismicity or spatial smoothing results in stationary behavior [4]. In the FP7 Project SHARE (Seismic Hazard Harmonization in Europe), seismic hazard will be assessed with a logic tree approach that allows for three types of branches for seismicity models: a) smoothed seismicity, b) SSZ, c) SSZ and faults. In this context, a large-scale zonation model for use in the smoothed seismicity branch, and a new consensus SSZ model for Portugal and Azores have been developed. The new models were achieved with the participation of regional experts by combining and adapting existing models and incorporating new regional knowledge of the earthquake potential. The main criteria used for delineating the SSZ include distribution of seismicity, broad geological architecture, crustal characteristics (oceanic versus continental, tectonically active versus stable, etc.), historical catalogue completeness, and the characteristics of active or potentially-active faults. This model will be integrated into an Iberian model of SSZ to be used in the Project SHARE seismic hazard assessment

A Test of Rank-Dependent Utility in the Context of Ambiguity

Experimental investigations of non-expected utility have primarily concentrated on decision under risk (probability triangles). The literature suggests, however, that ambiguity is one of the main causes for deviations from expected utility (EU). This article investigates the descriptive performance of rank-dependent utility (RDU) in the context of choice under ambiguity. We use the axiomatic difference between RDU and EU to critically test RDU against EU. Surprisingly, the RDU model does not provide any descriptive improvement over EU. Our data suggest other framing factors that do provide descriptive improvements over EU

Caracterização da saúde de crianças atendidas em creches e prevenção dos distúrbios de comunicação

For the purpose of characterizing the health of the population assisted by the Nursery Program (Programa Creche) at the three units financed by the city authorities of S.Paulo, Brazil, an enquiry was undertaken. A questionnaire consisting of both open and closed question concerning personal identification, personal antecedents, development and health was prepared and 133 of them were applied. Results indicated that children whose living conditions were unsatisfactory (humid and overcrowded housing) have presented respiratory infections and otitis in greater numbers. Most of the children were breast-fed at first but started being nursed artificially when two months old. Salty and varied texture foods were introduced at the appropriate ages and well accepted. Language delay is related predominantly to ages 3 to 7. Parents act properly lin communication situations. It is considered that the systematic use of the questionaire proposed will permit not only better knowledge of the health of the children, benefitting the multidisciplinary attendance and integration of the child, as also the improvement of preventive practices and make the surveillance of difficulties in communication possible.Com o objetivo de caracterizar a saúde da população atendida pelo Programa Creche, desenvolvido em três unidades conveniadas com a Prefeitura do Município de São Paulo (Brasil), foi feito um inquérito junto a essa população. Foram aplicados 133 questionários com perguntas abertas e fechadas relativas à identificação e antecedentes pessoais, desenvolvimento e saúde. Os resultados mostraram que crianças residentes em moradias desfavoráveis, com umidade e grande número de pessoas na casa apresentaram maior número de infecções respiratórias e de otite. A maioria das crianças foi aleitada naturalmente, passando para amamentação artificial com dois meses. Os alimentos salgados e de texturas variadas foram introduzidos na idade adequada e bem aceitos. Atraso de linguagem é referido predominantemente dos 3 aos 7 anos. Os pais atuam adequadamente em situações de comunicação. Conclui-se que a aplicação sistemática do questionário proposto permitirá não somente obter maior conhecimento das condições de saúde das crianças, favorecendo o atendimento multidisciplinar e integrado da criança, como otimizar condutas preventivas e possibilitar a realização de vigilância de distúrbios da comunicação

Incorporating Descriptive Metadata into Seismic Source Zone Models for Seismic Hazard Assessment: A case study of the Azores-West Iberian region

In probabilistic seismic-hazard analysis (PSHA), seismic source zone (SSZ) models are widely used to account for the contribution to the hazard from earth- quakes not directly correlated with geological structures. Notwithstanding the impact of SSZ models in PSHA, the theoretical framework underlying SSZ models and the criteria used to delineate the SSZs are seldom explicitly stated and suitably docu- mented. In this paper, we propose a methodological framework to develop and docu- ment SSZ models, which includes (1) an assessment of the appropriate scale and degree of stationarity, (2) an assessment of seismicity catalog completeness-related issues, and (3) an evaluation and credibility ranking of physical criteria used to delin- eate the boundaries of the SSZs. We also emphasize the need for SSZ models to be supported by a comprehensive set of metadata documenting both the unique character- istics of each SSZ and the criteria used to delineate its boundaries. This procedure ensures that the uncertainties in the model can be properly addressed in the PSHA and that the model can be easily updated whenever new data are available. The pro- posed methodology is illustrated using the SSZ model developed for the Azores–West Iberian region in the context of the Seismic Hazard Harmonization in Europe project (project SHARE) and some of the most relevant SSZs are discussed in detail

Characterization of large area avalanche photodiodes in X-ray and VUV-light detection

The present manuscript summarizes novel studies on the application of large area avalanche photodiodes (LAAPDs) to the detection of X-rays and vacuum ultraviolet (VUV) light. The operational characteristics of four different LAAPDs manufactured by Advanced Photonix Inc., with active areas of 80 and 200 mm^2 were investigated for X-ray detection at room temperature. The best energy resolution was found to be in the 10-18% range for 5.9 keV X-rays. The LAAPD, being compact, simple to operate and with high counting rate capability (up to about 10^5/s), proved to be useful in several applications, such as low-energy X-ray detection, where they can reach better performance than proportional counters. Since X-rays are used as reference in light measurements, the gain non-linearity between 5.9 keV X-rays and light pulses was investigated. The gain ratio between X-rays and VUV light decreases with gain, reaching 10 and 6% variations for VUV light produced in argon (~128 nm) and xenon (~172 nm), respectively, for a gain 200, while for visible light (~635 nm) the variation is lower than 1%. The effect of temperature on the LAAPD performance was investigated. Relative gain variations of about -5% per Celsius degree were observed for the highest gains. The excess noise factor was found to be independent on temperature, being between 1.8 and 2.3 for gains from 50 to 300. The energy resolution is better for decreasing temperatures due mainly to the dark current. LAAPDs were tested under intense magnetic fields up to 5 T, being insensitive when used in X-ray and visible-light detection, while for VUV light a significant amplitude reduction was observed at 5 T.Comment: 25 pages, 40 figures, submitted to JINS

Characterization of large area avalanche photodiodes in X-ray and VUV-light detection

The present manuscript summarizes novel studies on the application of large area avalanche photodiodes (LAAPDs) to the detection of X-rays and vacuum ultraviolet (VUV) light. The operational characteristics of four different LAAPDs manufactured by Advanced Photonix Inc., with active areas of 80 and 200 mm^2 were investigated for X-ray detection at room temperature. The best energy resolution was found to be in the 10-18% range for 5.9 keV X-rays. The LAAPD, being compact, simple to operate and with high counting rate capability (up to about 10^5/s), proved to be useful in several applications, such as low-energy X-ray detection, where they can reach better performance than proportional counters. Since X-rays are used as reference in light measurements, the gain non-linearity between 5.9 keV X-rays and light pulses was investigated. The gain ratio between X-rays and VUV light decreases with gain, reaching 10 and 6% variations for VUV light produced in argon (~128 nm) and xenon (~172 nm), respectively, for a gain 200, while for visible light (~635 nm) the variation is lower than 1%. The effect of temperature on the LAAPD performance was investigated. Relative gain variations of about -5% per Celsius degree were observed for the highest gains. The excess noise factor was found to be independent on temperature, being between 1.8 and 2.3 for gains from 50 to 300. The energy resolution is better for decreasing temperatures due mainly to the dark current. LAAPDs were tested under intense magnetic fields up to 5 T, being insensitive when used in X-ray and visible-light detection, while for VUV light a significant amplitude reduction was observed at 5 T.Comment: 25 pages, 40 figures, submitted to JINS

Characterization of large area avalanche photodiodes in X-ray and VUV-light detection

The present manuscript summarizes novel studies on the application of large area avalanche photodiodes (LAAPDs) to the detection of X-rays and vacuum ultraviolet (VUV) light. The operational characteristics of four different LAAPDs manufactured by Advanced Photonix Inc., with active areas of 80 and 200 mm^2 were investigated for X-ray detection at room temperature. The best energy resolution was found to be in the 10-18% range for 5.9 keV X-rays. The LAAPD, being compact, simple to operate and with high counting rate capability (up to about 10^5/s), proved to be useful in several applications, such as low-energy X-ray detection, where they can reach better performance than proportional counters. Since X-rays are used as reference in light measurements, the gain non-linearity between 5.9 keV X-rays and light pulses was investigated. The gain ratio between X-rays and VUV light decreases with gain, reaching 10 and 6% variations for VUV light produced in argon (~128 nm) and xenon (~172 nm), respectively, for a gain 200, while for visible light (~635 nm) the variation is lower than 1%. The effect of temperature on the LAAPD performance was investigated. Relative gain variations of about -5% per Celsius degree were observed for the highest gains. The excess noise factor was found to be independent on temperature, being between 1.8 and 2.3 for gains from 50 to 300. The energy resolution is better for decreasing temperatures due mainly to the dark current. LAAPDs were tested under intense magnetic fields up to 5 T, being insensitive when used in X-ray and visible-light detection, while for VUV light a significant amplitude reduction was observed at 5 T.Comment: 25 pages, 40 figures, submitted to JINS

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.