Optoelectronics of Inverted Type-I CdS/CdSe Core/Crown Quantum Ring

Inverted type-I heterostructure core/crown quantum rings (QRs) are quantum-efficient luminophores, whose spectral characteristics are highly tunable. Here, we study the optoelectronic properties of type-I core/crown CdS/CdSe QRs in the zincblende phase - over contrasting lateral size and crown width. For this we inspect their strain profiles, transition energies, transition matrix elements, spatial charge densities, electronic bandstructure, band-mixing probabilities, optical gain spectra, maximum optical gains and differential optical gains. Our framework uses an effective-mass envelope function theory based on the 8-band k$\cdot$p method employing the valence force field model for calculating the atomic strain distributions. The gain calculations are based on the density-matrix equation and take into consideration the excitonic effects with intraband scattering. Variations in the QR lateral size and relative widths of core and crown (ergo the composition) affect their energy levels, band-mixing probabilities, optical transition matrix elements, emission wavelengths/intensity, etc. The optical gain of QRs is also strongly dimension and composition dependent with further dependency on the injection carrier density causing band-filling effect. They also affect the maximum and differential gain at varying dimensions and compositions.Comment: Published in AIP Journal of Applied Physics (11 pages, 7 figures

Electronic structure of silicon-based nanostructures

We have developed an unifying tight-binding Hamiltonian that can account for the electronic properties of recently proposed Si-based nanostructures, namely, Si graphene-like sheets and Si nanotubes. We considered the $sp^3s^*$ and $sp^{3}$ models up to first- and second-nearest neighbors, respectively. Our results show that the Si graphene-like sheets considered here are metals or zero-gap semiconductors, and that the corresponding Si nanotubes follow the so-called Hamada's rule [Phys. Rev. Lett. {\bf 68}, 1579 1992]. Comparison to a recent {\it ab initio} calculation is made.Comment: 12 pages, 6 Figure

Influence of local and remote white matter conductivity anisotropy for a thalamic source on EEG/MEG field and return current computation

nverse methods are used to reconstruct current sources in the human brain by means of Electroencephalogra- phy (EEG) and Magnetoencephalography (MEG) measure- ments of event related fields or epileptic seizures. There exists a persistent uncertainty regarding the influence of anisotropy of the white matter compartment on neural source reconstruc- tion. In this paper, we study the sensitivity to anisotropy of the EEG/MEG forward problem for a thalamic source in a high resolution finite element volume conductor. The influence of anisotropy on computed fields will be presented by both high resolution visualization of fields and return current flow and topography and magnitude error measures. We pay particular attention to the influence of local conductivity changes in the neighborhood of the source. The combination of simulation and visualization provides deep insight into the effect of white matter conductivity anisotropy. We found that for both EEG and MEG formulations, the local presence of electrical anisotropy in the tissue surroun- ding the source substantially compromised the forward field computation, and correspondingly, the inverse source recons- truction. The degree of error resulting from the uncompen- sated presence of tissue anisotropy depended strongly on the proximity of the anisotropy to the source; remote anisotropy had a much weaker influence than anisotropic tissue that included the source

Microarray evidence for off target effects in tick RNA interference experiments, and the lack of strong correlation between DSRNA and antibody phenotypes in tick In vitro treatments for vaccine candidate screening

No abstract availabl

Spatial mapping of band bending in semiconductor devices using in-situ quantum sensors

Band bending is a central concept in solid-state physics that arises from local variations in charge distribution especially near semiconductor interfaces and surfaces. Its precision measurement is vital in a variety of contexts from the optimisation of field effect transistors to the engineering of qubit devices with enhanced stability and coherence. Existing methods are surface sensitive and are unable to probe band bending at depth from surface or bulk charges related to crystal defects. Here we propose an in-situ method for probing band bending in a semiconductor device by imaging an array of atomic-sized quantum sensing defects to report on the local electric field. We implement the concept using the nitrogen-vacancy centre in diamond, and map the electric field at different depths under various surface terminations. We then fabricate a two-terminal device based on the conductive two-dimensional hole gas formed at a hydrogen-terminated diamond surface, and observe an unexpected spatial modulation of the electric field attributed to a complex interplay between charge injection and photo-ionisation effects. Our method opens the way to three-dimensional mapping of band bending in diamond and other semiconductors hosting suitable quantum sensors, combined with simultaneous imaging of charge transport in complex operating devices.Comment: This is a pre-print of an article published in Nature Electronics. The final authenticated version is available online at https://dx.doi.org/10.1038/s41928-018-0130-

Asymmetrical domain wall propagation in bifurcated PMA wire structure due to the Dzyaloshinskii-Moriya interaction

Controlling domain wall (DW) motion in complex magnetic network structures is of paramount significance for the development of spin-based devices. Here, we report on the dynamics of a propagating DW in a bifurcated ferromagnetic wire with perpendicular magnetic anisotropy (PMA). The Dzyaloshinskii-Moriya interaction (DMI) in the wire structure induces a tilt angle to the injected DW, which leads to a quasi-selective propagation through the network branch. The DW tilting causes a field interval between DWs to arrive at Hall bars in the individual branches. Micromagnetic results further show that by tailoring the strength of the DMI, the control of DW dynamics in the PMA complex network structures can be achieved

An Optimal Frequency in Ca²⁺ oscillations for stomatal closure is an emergent property of ion transport in guard cells^1[OPEN]

Oscillations in cytosolic-free Ca2+ concentration ([Ca2+]i) have been proposed to encode information that controls stomatal closure. [Ca2+]i oscillations with a period near 10 min were previously shown to be optimal for stomatal closure in Arabidopsis (Arabidopsis thaliana), but the studies offered no insight into their origins or mechanisms of encoding to validate a role in signaling. We have used a proven systems modeling platform to investigate these [Ca2+]i oscillations and analyze their origins in guard cell homeostasis and membrane transport. The model faithfully reproduced differences in stomatal closure as a function of oscillation frequency with an optimum period near 10 min under standard conditions. Analysis showed that this optimum was one of a range of frequencies that accelerated closure, each arising from a balance of transport and the prevailing ion gradients across the plasma membrane and tonoplast. These interactions emerge from the experimentally derived kinetics encoded in the model for each of the relevant transporters, without the need of any additional signaling component. The resulting frequencies are of sufficient duration to permit substantial changes in [Ca2+]i and, with the accompanying oscillations in voltage, drive the K+ and anion efflux for stomatal closure. Thus, the frequency optima arise from emergent interactions of transport across the membrane system of the guard cell. Rather than encoding information for ion flux, these oscillations are a by-product of the transport activities that determine stomatal aperture

A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS

This paper presents the case study on the Hotel New World tragedy. The building collapsed on 15th March 1986 and an investigation was conducted to determine the main cause of this tragedy. There were several speculations made on the cause of the collapse such as internal explosion, bad concrete mixture and swampy land affecting the building’s foundations. However, after thorough investigations, these speculations were proved to be inappropriate and the main cause was found to be due to the engineer’s miscalculation during the designing stage which leads to this catastrophic failure of the building. Rescue operation was initiated immediately after the collapse to rescue the victims and the aftermath of this tragedy had led to multiple reclamations. These reclamations include the endorsement of Building Control Act 1989 along Building Control (Accredited Checkers) Regulations 1989 as a stricter quality control measure. The analysis shows that this case may be due to unwanted mistakes or negligence of the engineers in carrying out their duties. Several actions were taken according to the ethical theories and codes of ethics. However after the analysis and evaluation were done, duty ethics and right ethics were more relevant to the collapse of Hotel New World case as compared to the other ethical theories and thus reclamations were done based on duty ethics and right ethic