3,327 research outputs found
Thin film solid-state reactions forming carbides as contact materials for carbon-containing semiconductors
A
Solid-state formation of titanium carbide and molybdenum carbide as contacts for carbon-containing semiconductors
Texture in thin film silicides and germanides : a review
Silicides and germanides are compounds consisting of a metal and silicon or germanium. In the microelectronics industry, silicides are the material of choice for contacting silicon based devices (over the years, CoSi2, C54-TiSi2, and NiSi have been adopted), while germanides are considered as a top candidate for contacting future germanium based electronics. Since also strain engineering through the use of Si1-xGex in the source/drain/gate regions of MOSFET devices is an important technique for improving device characteristics in modern Si-based microelectronics industry, a profound understanding of the formation of silicide/germanide contacts to silicon and germanium is of utmost importance. The crystallographic texture of these films, which is defined as the statistical distribution of the orientation of the grains in the film, has been the subject of scientific studies since the 1970s. Different types of texture like epitaxy, axiotaxy, fiber, or combinations thereof have been observed in such films. In recent years, it has become increasingly clear that film texture can have a profound influence on the formation and stability of silicide/germanide contacts, as it controls the type and orientation of grain boundaries (affecting diffusion and agglomeration) and the interface energy (affecting nucleation during the solid-state reaction). Furthermore, the texture also has an impact on the electrical characteristics of the contact, as the orientation and size of individual grains influences functional properties such as contact resistance and sheet resistance and will induce local variations in strain and Schottky barrier height. This review aims to give a comprehensive overview of the scientific work that has been published in the field of texture studies on thin film silicide/germanide contacts. Published by AIP Publishing
Sex Trafficking in Asia: The Impact of Policy, Economic Opportunity, and Globalization
This paper examines the prevalence of sex trafficking in Asia and considers factors that make it stand out among other regions of the world. It explains the consequences of poorly designed policy on sex trafficking, using the Chinese One Child Policy as an example. It also looks at the lack of economic opportunity in countries like Thailand and Cambodia, that can incentivize the selling of women to traffickers. Finally, this paper considers the role of globalization in making the transport of sex trafficking victims easier as well as the effect of modern communication technologies on trafficking
Composition dependent effects in gas chromatography
Fundamantal concepts are developed which are required to optimize a gas chromatograph-mass spectrometer chemical analysis system suitable for use on an unmanned roving vehicle for Mars exploration. Prior efforts have developed simulation models for the chromatograph which were compared with data obtained from a test facility. Representation of binary systems by superposition was shown to be a first-order approximation and in certain cases large discrepencies were noted. This subtask has as its objective generation of additional binary data and analysis of the observed nonlinear effects
Measuring the notched compressive strength of composite laminates: Specimen size effects
Large fibre reinforced composite structures can give much lower strengths than small test specimens, so a proper understanding of scaling is vital for their safe and efficient use. Small size (scale) specimens are commonly tested to justify allowable stresses, but could be dangerous if results are extrapolated without accounting for scaling effects. On the other hand large factors are sometimes applied to compensate for uncertainties, resulting in overweight designs. The most important variables of scaling effects on the strength of composites with open holes have been identified from experimental tests as notch size, ply and laminate thickness. In this study, these have been scaled both independently and simultaneously over a large range of combinations. The specimens are fabricated from commercially available (Hexcel Composites Ltd.) carbon/epoxy pre-impregnated tapes 0.125 mm thick (IM7/8552). The material is laid up by hand in unidirectional [04]ns with n = 2, 3, 4, and 8 (i.e., 2, 3, 4 and 8 mm thick) and multidirectional laminates; two generic quasi-isotropic lay-ups, one fabricated with blocked plies [45n/90n/−45n/0n]s and the other with distributed layers [45/90/−45/0]ns with n = 2, 4 and 8 are examined. It is shown that the critical failure mechanism in these laminates is in the form of fibre microbuckling or kinking. The unnotched compressive strength in unidirectional specimens thicker than 2 mm is found to be limited by the stress concentration developed at the end tabs and manufacturing induced defects in the form of ply waviness, fibre misalignment and voids rather than specimen size (scaling). In the open hole specimens, for both lay-ups, the strength reduction observed is due to hole size effect rather than specimen thickness or volume increase. The open hole (notched) compressive strength results obtained compare favourably to predictions by a linear softening cohesive zone fracture model developed in earlier work by the second author
Experimental certification of millions of genuinely entangled atoms in a solid
Quantum theory predicts that entanglement can also persist in macroscopic
physical systems, albeit difficulties to demonstrate it experimentally remain.
Recently, significant progress has been achieved and genuine entanglement
between up to 2900 atoms was reported. Here we demonstrate 16 million genuinely
entangled atoms in a solid-state quantum memory prepared by the heralded
absorption of a single photon. We develop an entanglement witness for
quantifying the number of genuinely entangled particles based on the collective
effect of directed emission combined with the nonclassical nature of the
emitted light. The method is applicable to a wide range of physical systems and
is effective even in situations with significant losses. Our results clarify
the role of multipartite entanglement in ensemble-based quantum memories as a
necessary prerequisite to achieve a high single-photon process fidelity crucial
for future quantum networks. On a more fundamental level, our results reveal
the robustness of certain classes of multipartite entangled states, contrary
to, e.g., Schr\"odinger-cat states, and that the depth of entanglement can be
experimentally certified at unprecedented scales.Comment: 11 pages incl. Methods and Suppl. Info., 4 figures, 1 table. v2:
close to published version. See also parallel submission by Zarkeshian et al
(1703.04709
Production, purification, sequencing and activity spectra of mutacins D-123.1 and F-59.1
<p>Abstract</p> <p>Background</p> <p>The increase in bacterial resistance to antibiotics impels the development of new anti-bacterial substances. Mutacins (bacteriocins) are small antibacterial peptides produced by <it>Streptococcus mutans </it>showing activity against bacterial pathogens. The objective of the study was to produce and characterise additional mutacins in order to find new useful antibacterial substances.</p> <p>Results</p> <p>Mutacin F-59.1 was produced in liquid media by <it>S. mutans </it>59.1 while production of mutacin D-123.1 by <it>S. mutans </it>123.1 was obtained in semi-solid media. Mutacins were purified by hydrophobic chromatography. The amino acid sequences of the mutacins were obtained by Edman degradation and their molecular mass was determined by mass spectrometry. Mutacin F-59.1 consists of 25 amino acids, containing the YGNGV consensus sequence of pediocin-like bacteriocins with a molecular mass calculated at 2719 Da. Mutacin D-123.1 has an identical molecular mass (2364 Da) with the same first 9 amino acids as mutacin I. Mutacins D-123.1 and F-59.1 have wide activity spectra inhibiting human and food-borne pathogens. The lantibiotic mutacin D-123.1 possesses a broader activity spectrum than mutacin F-59.1 against the bacterial strains tested.</p> <p>Conclusion</p> <p>Mutacin F-59.1 is the first pediocin-like bacteriocin identified and characterised that is produced by <it>Streptococcus mutans</it>. Mutacin D-123.1 appears to be identical to mutacin I previously identified in different strains of <it>S. mutans</it>.</p
- …