1,550 research outputs found
GLONASS CDMA L3 ambiguity resolution and positioning
A first assessment of GLONASS CDMA L3 ambiguity resolution and positioning performance is provided. Our analyses are based on GLONASS L3 data from the satellite pair SVNs 755-801, received by two JAVAD receivers at Curtin University, Perth, Australia. In our analyses, four different versions of the two-satellite model are applied: the geometry-free model, the geometry-based model , the height-constrained geometry-based model, and the geometry-fixed model. We study the noise characteristics (carrier-to-noise density, measurement precision), the integer ambiguity resolution performance (success rates and distribution of the ambiguity residuals), and the positioning performance (ambiguity float and ambiguity fixed). The results show that our empirical outcomes are consistent with their formal counterparts and that the GLONASS data have a lower noise level than that of GPS, particularly in case of the code data. This difference is not only seen in the noise levels but also in their onward propagation to the ambiguity time series and ambiguity residuals distribution
Why impaired wellness may be inevitable in medicine, and why that may not be a bad thing
Context: A wellness crisis exists among physicians and medical trainees. High rates of burnout, depression, stress and other states of impaired wellness have driven a sense of urgency to create solutions, and the medical education community has mobilised impressively. However, we argue—and data suggest—that this rush to find solutions has outpaced our efforts to more fully understand the nature of impaired wellness in medicine. This, we believe, has led to the implementation of solutions informed by limited understanding of the problems we intend to solve. Methods: In this paper, we explore three contributors to this situation: (i) shaky definitions and conceptualisations of wellness, (ii) the predominance of deductive, quantitative research informing our understanding and current solutions, and (iii) the reliance on a ‘disease-focused’ approach to addressing impaired wellness in physicians and trainees. We discuss how these contributors have led to the current state of the science of wellness in medicine: one characterised by an expanding array of solutions built upon narrow conceptualisations of wellness and how it can be impaired. Discussion: Moving beyond the current state of the science on wellness in medicine will require three critical developments: (i) consistent use of clear definitions of wellness; (ii) expanding our methodologies to include those utilising direct interaction with participants; and (iii) moving beyond solutions informed by a disease-model approach. We propose a different way of thinking about wellness: one based on what we view as an inherent—and potentially unavoidable—risk of experiencing impairment during a career in medicine. We argue that efforts to extinguish and eliminate all states of impaired wellness may also eliminate opportunities to develop constructive coping mechanisms and future resilience, and that wellness may best be conceptualised as healthy and authentic engagement with the inevitable adversity of a career in medicine
Distributional theory for the DIA method
The DIA method for the detection, identification and adaptation of model misspecifications combines estimation with testing. The aim of the present contribution is to introduce a unifying framework for the rigorous capture of this combination. By using a canonical model formulation and a partitioning of misclosure space, we show that the whole estimation–testing scheme can be captured in one single DIA estimator. We study the characteristics of this estimator and discuss some of its distributional properties. With the distribution of the DIA estimator provided, one can then study all the characteristics of the combined estimation and testing scheme, as well as analyse how they propagate into final outcomes. Examples are given, as well as a discussion on how the distributional properties compare with their usage in practice
Fluid Biomarkers for Monitoring Structural Changes in Polyneuropathies: Their Use in Clinical Practice and Trials
Reliable and responsive tools for monitoring disease activity and treatment outcomes in patients with neuropathies are lacking. With the emergence of ultrasensitive blood bioassays, proteins released with nerve damage are potentially useful response biomarkers for many neurological disorders, including polyneuropathies. In this review, we provide an overview of the existing literature focusing on potential applications in polyneuropathy clinical care and trials. Whilst several promising candidates have been identified, no studies have investigated if any of these proteins can serve as response biomarkers of longitudinal disease activity, except for neurofilament light (NfL). For NfL, limited evidence exists supporting a role as a response biomarker in Guillain-Barré syndrome, vasculitic neuropathy, and chronic inflammatory demyelinating polyradiculoneuropathy (CIDP). Most evidence exists for NfL as a response biomarker in hereditary transthyretin-related amyloidosis (hATTR). At the present time, the role of NfL is therefore limited to a supporting clinical tool or exploratory endpoint in trials. Future developments will need to focus on the discovery of additional biomarkers for anatomically specific and other forms of nerve damage using high-throughput technologies and highly sensitive analytical platforms in adequality powered studies of appropriate design. For NfL, a better understanding of cut-off values, the relation to clinical symptoms and long-term disability as well as dynamics in serum on and off treatment is needed to further expand and proceed towards implementation
How is museum lighting selected? An insight into current practice in UK museums
The results of a series of interviews with museum professionals on the subject of museum lighting specification and selection are reported, with the aim that this report should provide an insight into current practice. Specific attention is given to the usage of industry parameters (lux, CIE-Ra, CCT), and to investigating the level of ubiquity of light-emitting diode (LED) technology. It is found that the damage potential of lighting is considered most commonly in terms of lux dosage, that a minimum cut off in terms of CIE-Ra is used to specify lighting ‘quality’, and that LED usage is growing, primarily as a result of institution-wide energy use reduction drives
An assessment of smartphone and low-cost multi-GNSS single-frequency RTK positioning for low, medium and high ionospheric disturbance periods
The emerging GNSSs make single-frequency (SF) RTK positioning possible. In this contribution two different types of low-cost (few hundred USDs) RTK receivers are analyzed, which can track L1 GPS, B1 BDS, E1 Galileo and L1 QZSS, or any combinations thereof, for a location in Dunedin, New Zealand. These SF RTK receivers can potentially give competitive ambiguity resolution and positioning performance to that of more expensive (thousands USDs) dual-frequency (DF) GPS receivers. A smartphone implementation of one of these SF receiver types is also evaluated. The least-squares variance component estimation (LS-VCE) procedure is first used to formulate a realistic stochastic model, which assures that our receivers at hand can achieve the best possible ambiguity resolution and RTK positioning performance. The best performing low-cost SF RTK receiver types are then assessed against DF GPS receivers and survey-grade antennas. Real data with ionospheric disturbances at low, medium and high levels are analyzed, while making use of the ionosphere-weighted model. It will be demonstrated that when the presence of the residual ionospheric delays increases, instantaneous RTK positioning is not possible for any of the receivers, and a multi-epoch model is necessary to use. It is finally shown that the low-cost SF RTK performance can remain competitive to that of more expensive DF GPS receivers even when the ionospheric disturbance level reaches a Kp-index of 7-, i.e. for a strong geomagnetic storm, for the baseline at hand
Towards single-electron metrology
We review the status of the understanding of single-electron transport (SET)
devices with respect to their applicability in metrology. Their envisioned role
as the basis of a high-precision electrical standard is outlined and is
discussed in the context of other standards. The operation principles of single
electron transistors, turnstiles and pumps are explained and the fundamental
limits of these devices are discussed in detail. We describe the various
physical mechanisms that influence the device uncertainty and review the
analytical and numerical methods needed to calculate the intrinsic uncertainty
and to optimise the fabrication and operation parameters. Recent experimental
results are evaluated and compared with theoretical predictions. Although there
are discrepancies between theory and experiments, the intrinsic uncertainty is
already small enough to start preparing for the first SET-based metrological
applications.Comment: 39 pages, 14 figures. Review paper to be published in International
Journal of Modern Physics
Radiation-Hydrodynamics with MPI-AMRVAC: Flux-Limited Diffusion
Radiation controls the dynamics and energetics of many astrophysical
environments. To capture the coupling between the radiation and matter,
however, is often a physically complex and computationally expensive endeavour.
We develop a numerical tool to perform radiation-hydrodynamics simulations in
various configurations at an affordable cost. We build upon the finite volume
code MPI-AMRVAC to solve the equations of hydrodynamics on multi-dimensional
adaptive meshes and introduce a new module to handle the coupling with
radiation. A non-equilibrium, flux-limiting diffusion approximation is used to
close the radiation momentum and energy equations. The time-dependent radiation
energy equation is then solved within a flexible framework, accounting fully
for radiation forces and work terms and further allowing the user to adopt a
variety of descriptions for the radiation-matter interaction terms (the
'opacities'). We validate the radiation module on a set of standard testcases
for which different terms of the radiative energy equation predominate. As a
preliminary application to a scientific case, we calculate spherically
symmetric models of the radiation-driven and optically thick supersonic
outflows from massive Wolf-Rayet stars. This also demonstrates our code's
flexibility, as the illustrated simulation combines opacities typically used in
static stellar structure models with a parametrised form for the enhanced
line-opacity expected in supersonic flows. This new module provides a
convenient and versatile tool to perform multi-dimensional and high resolution
radiative-hydrodynamics simulations in optically thick environments with the
MPI-AMRVAC code. The code is ready to be used for a variety of astrophysical
applications, where a first target for us will be multi-dimensional simulations
of stellar outflows from Wolf-Rayet stars.Comment: 14 pages, 10 figures Submitted to A&
More than kin:Subordinates foster strong bonds with relatives and potential mates in a social bird
Social interactions shape relationships between individuals in complex societies. Affiliative interactions are associated with benefits and strengthen social bonds, while aggressive interactions are costly and negatively affect social bonds. Individuals may attempt to reduce aggressive encounters through submissive displays directed at higher-ranking individuals. Thus, fine-scale patterns of affilia-tive, aggressive, and submissive interactions may reflect costly and beneficial social relationships within groups, providing insight into the benefits of group living and the mechanisms of conflict resolution. So far, however, most studies have looked at social interactions and benefits of group living in isolation. We investigated how the strength of social bonds (affiliative vs. aggressive interactions) and submissive displays varied with kin-selected and potential mating benefits, and with reproductive conflict in the cooperatively breeding purple-crowned fairy-wren, Malurus coronatus. Our results revealed that subordinates formed equally strong social bonds with kin and potential mates (unrelated opposite-sex individuals) while they formed antagonistic relationships with reproductive competitors that offered no kin-selected or mating benefits (unrelated same-sex individuals). Submissive displays were directed exclusively at same-sex breeders, regardless of relatedness. Affiliation and submission were associated with reduced foraging time when food was limited, indicating a cost to maintaining positive relationships. Together, our results suggest that the strength of social bonds is determined by (potential) benefits obtained from group members, while submission likely serves to reduce conflict. Our findings highlight the importance of time-costly social interactions for maintaining relationships with group members, providing insight into how social groups of individuals with (partly) divergent interests can remain stable.</p
Importance of highly selective LC–MS/MS analysis for the accurate quantification of tamoxifen and its metabolites: focus on endoxifen and 4-hydroxytamoxifen
The antiestrogenic effect of tamoxifen is mainly attributable to the active metabolites endoxifen and 4-hydroxytamoxifen. This effect is assumed to be concentration-dependent and therefore quantitative analysis of tamoxifen and metabolites for clinical studies and therapeutic drug monitoring is increasing. We investigated the large discrepancies in reported mean endoxifen and 4-hydroxytamoxifen concentrations. Two published LC–MS/MS methods are used to analyse a set of 75 serum samples from patients treated with tamoxifen. The method from Teunissen et al. (J Chrom B, 879:1677–1685, 2011) separates endoxifen and 4-hydroxytamoxifen from other tamoxifen metabolites with similar masses and fragmentation patterns. The second method, published by Gjerde et al. (J Chrom A, 1082:6–14, 2005) however lacks selectivity, resulting in a factor 2–3 overestimation of the endoxifen and 4-hydroxytamoxifen levels, respectively. We emphasize the use of highly selective LC–MS/MS methods for the quantification of tamoxifen and its metabolites in biological samples
- …