19,519 research outputs found
Viscous/potential flow about multi-element two-dimensional and infinite-span swept wings: Theory and experiment
The viscous subsonic flow past two-dimensional and infinite-span swept multi-component airfoils is studied theoretically and experimentally. The computerized analysis is based on iteratively coupled boundary layer and potential flow analysis. The method, which is restricted to flows with only slight separation, gives surface pressure distribution, chordwise and spanwise boundary layer characteristics, lift, drag, and pitching moment for airfoil configurations with up to four elements. Merging confluent boundary layers are treated. Theoretical predictions are compared with an exact theoretical potential flow solution and with experimental measures made in the Ames 40- by 80-Foot Wind Tunnel for both two-dimensional and infinite-span swept wing configurations. Section lift characteristics are accurately predicted for zero and moderate sweep angles where flow separation effects are negligible
Towards a Measurement of Free Riding within Private Collective Action Organizations
The objective of this study is to determine if there is a dominant free riding activity which can be identified and used as the basis for measuring free riding, or if multiple free riding actions and/or behaviors coexist within large collective action organizations. The study uses a confirmatory factor analysis model to evaluate member level survey data from a large agricultural marketing cooperative.Institutional and Behavioral Economics, Marketing, Research Methods/ Statistical Methods,
Digital frequency synthesizer for radar astronomy
The digital frequency synthesizer (DFS) is an integral part of the programmable local oscillator (PLO) which is being developed for the NASA's Deep Space Network (DSN) and radar astronomy. Here, the theory of operation and the design of the DFS are discussed, and the design parameters in application for the Goldstone Solar System Radar (GSSR) are specified. The spectral purity of the DFS is evaluated by analytically evaluating the output spectrum of the DFS. A novel architecture is proposed for the design of the DFS with a frequency resolution of 1/2(exp 48) of the clock frequency (0.35 mu Hz at 100 MHz), a phase resolution of 0.0056 degrees (16 bits), and a frequency spur attenuation of -96 dBc
CELSS Transportation Analysis
Regenerative life support systems based on the use of biological material was considered for inclusion in manned spacecraft. Biological life support systems are developed in the controlled ecological life support system (CELSS) program. Because of the progress achieved in the CELSS program, it is determined which space missions may profit from use of the developing technology. Potential transportation cost savings by using CELSS technology for selected future manned space missions was evaluated. Six representative missions were selected which ranged from a low Earth orbit mission to those associated with asteroids and a Mars sortie. The crew sizes considered varied from four persons to five thousand. Other study parameters included mission duration and life support closure percentages, with the latter ranging from complete resupply of consumable life support materials to 97% closure of the life support system. The analytical study approach and the missions and systems considered, together with the benefits derived from CELSS when applicable are described
Aerodynamic characteristics of the 40- by 80/80- by 120-foot wind tunnel at NASA Ames Research Center
The design and testing of vane sets and air-exchange inlet for the 40 x 80/80 x 120-ft wind tunnel at NASA Ames are reported. Boundary-layer analysis and 2D and 3D inviscid panel codes are employed in computer models of the system, and a 1/10-scale 2D facility and a 1/50-scale 3D model of the entire wind tunnel are used in experimental testing of the vane sets. The results are presented in graphs, photographs, drawings, and diagrams are discussed. Generally good agreement is found between the predicted and measured performance
Leading-edge slat optimization for maximum airfoil lift
A numerical procedure for determining the position (horizontal location, vertical location, and deflection) of a leading edge slat that maximizes the lift of multielement airfoils is presented. The structure of the flow field is calculated by iteratively coupling potential flow and boundary layer analysis. This aerodynamic calculation is combined with a constrained function minimization analysis to determine the position of a leading edge slat so that the suction peak on the nose of the main airfoil is minized. The slat position is constrained by the numerical procedure to ensure an attached boundary layer on the upper surface of the slat and to ensure negligible interaction between the slat wake and the boundary layer on the upper surface of the main airfoil. The highest angle attack at which this optimized slat position can maintain attached flow on the main airfoil defines the optimum slat position for maximum lift. The design method is demonstrated for an airfoil equipped with a leading-edge slat and a trailing edge, single-slotted flap. The theoretical results are compared with experimental data, obtained in the Ames 40 by 80 Foot Wind Tunnel, to verify experimentally the predicted slat position for maximum lift. The experimentally optimized slat position is in good agreement with the theoretical prediction, indicating that the theoretical procedure is a feasible design method
Numerical solution of the time-dependent compressible Navier-Stokes equations in inlet regions
The results of a study to determine the effects of compressibility on the viscous flow through channels that have straight, parallel walls are presented. Two channel configurations are considered, the flow between two semi-infinite flat plates with uniform flow prescribed at the inlet plane and a cascade of semi-infinite flat plates with uniform flow introduced upstream. The flow field is modeled by using the time dependent, compressible Navier-Stokes equations. Time dependent solutions are obtained by using an explicit finite difference technique which advances the pressure on near field subsonic boundaries such that accurate steady state solutions are obtained. Steady state results at Reynolds number 20 and 150 are presented for Mach numbers between 0.09 and 0.36 and compared with the incompressible solutions of previous studies
A Limited Habitable Zone for Complex Life
The habitable zone (HZ) is commonly defined as the range of distances from a
host star within which liquid water, a key requirement for life, may exist on a
planet's surface. Substantially more CO2 than present in Earth's modern
atmosphere is required to maintain clement temperatures for most of the HZ,
with several bars required at the outer edge. However, most complex aerobic
life on Earth is limited by CO2 concentrations of just fractions of a bar. At
the same time, most exoplanets in the traditional HZ reside in proximity to M
dwarfs, which are more numerous than Sun-like G dwarfs but are predicted to
promote greater abundances of gases that can be toxic in the atmospheres of
orbiting planets, such as carbon monoxide (CO). Here we show that the HZ for
complex aerobic life is likely limited relative to that for microbial life. We
use a 1D radiative-convective climate and photochemical models to circumscribe
a Habitable Zone for Complex Life (HZCL) based on known toxicity limits for a
range of organisms as a proof of concept. We find that for CO2 tolerances of
0.01, 0.1, and 1 bar, the HZCL is only 21%, 32%, and 50% as wide as the
conventional HZ for a Sun-like star, and that CO concentrations may limit some
complex life throughout the entire HZ of the coolest M dwarfs. These results
cast new light on the likely distribution of complex life in the universe and
have important ramifications for the search for exoplanet biosignatures and
technosignatures.Comment: Revised including additional discussion. Published Gold OA in ApJ. 9
pages, 5 figures, 5 table
EC701 Revised 1953 Farm Water System : Insulated Pump House
Extension circular 701 is a 1953 revision of extension circular 701. Along with providing a material list and diagrams for building an insulated pump house, it also provides information on the advantages of a well-built pump house and thing to do when building one
- …