Superconducting Gap and Pseudogap in Bi-2212

We present results of Raman scattering experiments in differently doped Bi-2212 single crystals. Below Tc the spectra show pair-breaking features in the whole doping range. The low frequency power laws confirm the existence of a $d_{x^2-y^2}$-wave order parameter. In the normal state between Tc and T* = 200K we find evidence for a pseudogap in B2g symmetry. Upon doping its effect on the spectra decreases while its energy scale appears to be unchanged.Comment: 2 pages, 1 EPS figure; LT22 Proceedings to appear in Physica

Application of a physics-based model to predict the performance curves of pumps as turbines

This paper presents the application of a physics-based simulation model, aimed at predicting the performance curves of pumps as turbines (PATs) based on the performance curves of the respective pump. The simulation model implements the equations for estimating head, power and efficiency for both direct and reverse operation. Model tuning on a given machine is performed by using loss coefficients and specific parameters identified by means of an optimization procedure, which simultaneously optimizes both the pump and PAT operation. The simulation model is calibrated in this paper on data taken from the literature, reporting both pump and PAT performance curves for head and efficiency over the entire range of operation. The performance data refer to twelve different centrifugal pumps, running in both pump and PAT mode. The accuracy of the predictions of the physics-based simulation model is quantitatively assessed against both pump and PAT performance curves and best efficiency point. Prediction consistency from a physical point of view is also evaluated

Prediction of compressor efficiency by means of Bayesian Hierarchical Models

The prediction of time evolution of gas turbine performance is an emerging requirement of modern prognostics and health management systems, aimed at improving system reliability and availability, while reducing life cycle costs. In this work, a data-driven Bayesian Hierarchical Model (BHM) is employed to perform a probabilistic prediction of gas turbine future behavior. The BHM approach is applied to field data, taken from the literature and representative of gas turbine degradation over time for a time frame of 7-9 years. The predicted variable is compressor efficiency collected from three power plants characterized by high degradation rate. The capabilities of the BHM prognostic method are assessed by considering two different forecasting approaches, i.e. single-step and multi-step forecast. For the considered field data, the prediction accuracy is very high for both approaches. In fact, the average values of the prediction errors are lower than 0.3% for single-step prediction and lower than 0.6% for multi- step prediction

Complex Systems Science: Dreams of Universality, Reality of Interdisciplinarity

Using a large database (~ 215 000 records) of relevant articles, we empirically study the "complex systems" field and its claims to find universal principles applying to systems in general. The study of references shared by the papers allows us to obtain a global point of view on the structure of this highly interdisciplinary field. We show that its overall coherence does not arise from a universal theory but instead from computational techniques and fruitful adaptations of the idea of self-organization to specific systems. We also find that communication between different disciplines goes through specific "trading zones", ie sub-communities that create an interface around specific tools (a DNA microchip) or concepts (a network).Comment: Journal of the American Society for Information Science and Technology (2012) 10.1002/asi.2264

Proton NMR studies of the electronic structure of ZrH/sub x/

The proton spin lattice relaxation times and Knight shifts were measured in f.c.c. (delta-phase) and f.c.t. (epsilon-phase) ZrH/sub x/ for 1.5 or = to x or = to 2.0. Both parameters indicate that N(E/sub F/) is very dependent upon hydrogen content with a maximum occurring at ZrH1 83. This behavior is ascribed to modifications in N(E/sub F/) through a fcc/fct distortion in ZrH/sub x/ associated with a Jahn-Teller effect

Comparison of different approaches to predict the performance of pumps as turbines (PATs)

This paper deals with the comparison of different methods which can be used for the prediction of the performance curves of pumps as turbines (PATs). The considered approaches are four, i.e., one physics-based simulation model ("white box" model), two "gray box" models, which integrate theory on turbomachines with specific data correlations, and one "black box" model. More in detail, the modeling approaches are: (1) a physics-based simulation model developed by the same authors, which includes the equations for estimating head, power, and efficiency and uses loss coefficients and specific parameters; (2) a model developed by Derakhshan and Nourbakhsh, which first predicts the best efficiency point of a PAT and then reconstructs their complete characteristic curves by means of two ad hoc equations; (3) the prediction model developed by Singh and Nestmann, which predicts the complete turbine characteristics based on pump shape and size; (4) an Evolutionary Polynomial Regression model, which represents a data-driven hybrid scheme which can be used for identifying the explicit mathematical relationship between PAT and pump curves. All approaches are applied to literature data, relying on both pump and PAT performance curves of head, power, and efficiency over the entire range of operation. The experimental data were provided by Derakhshan and Nourbakhsh for four different turbomachines, working in both pump and PAT mode with specific speed values in the range 1.53-5.82. This paper provides a quantitative assessment of the predictions made by means of the considered approaches and also analyzes consistency from a physical point of view. Advantages and drawbacks of each method are also analyzed and discussed.This paper deals with the comparison of different methods which can be used for the prediction of the performance curves of pumps as turbines (PATs). The considered approaches are four, i.e., one physics-based simulation model ("white box" model), two "gray box" models, which integrate theory on turbomachines with specific data correlations, and one "black box" model. More in detail, the modeling approaches are: (1) a physics-based simulation model developed by the same authors, which includes the equations for estimating head, power, and efficiency and uses loss coefficients and specific parameters; (2) a model developed by Derakhshan and Nourbakhsh, which first predicts the best efficiency point of a PAT and then reconstructs their complete characteristic curves by means of two ad hoc equations; (3) the prediction model developed by Singh and Nestmann, which predicts the complete turbine characteristics based on pump shape and size; (4) an Evolutionary Polynomial Regression model, which represents a data-driven hybrid scheme which can be used for identifying the explicit mathematical relationship between PAT and pump curves. All approaches are applied to literature data, relying on both pump and PAT performance curves of head, power, and efficiency over the entire range of operation. The experimental data were provided by Derakhshan and Nourbakhsh for four different turbomachines, working in both pump and PAT mode with specific speed values in the range 1.53-5.82. This paper provides a quantitative assessment of the predictions made by means of the considered approaches and also analyzes consistency from a physical point of view. Advantages and drawbacks of each method are also analyzed and discussed

Energy production by means of pumps as turbines in water distribution networks

This paper deals with the estimation of the energy production by means of pumps used as turbines to exploit residual hydraulic energy, as in the case of available head and flow rate in water distribution networks. To this aim, four pumps with different characteristics are investigated to estimate the producible yearly electric energy. The performance curves of Pumps As Turbines (PATs), which relate head, power, and efficiency to the volume flow rate over the entire PAT operation range, were derived by using published experimental data. The four considered water distribution networks, for which experimental data taken during one year were available, are characterized by significantly different hydraulic features (average flow rate in the range 10-116 L/s; average pressure reduction in the range 12-53 m). Therefore, energy production accounts for actual flow rate and head variability over the year. The conversion efficiency is also estimated, for both the whole water distribution network and the PAT alone.This paper deals with the estimation of the energy production by means of pumps used as turbines to exploit residual hydraulic energy, as in the case of available head and flow rate in water distribution networks. To this aim, four pumps with different characteristics are investigated to estimate the producible yearly electric energy. The performance curves of Pumps As Turbines (PATs), which relate head, power, and efficiency to the volume flow rate over the entire PAT operation range, were derived by using published experimental data. The four considered water distribution networks, for which experimental data taken during one year were available, are characterized by significantly different hydraulic features (average flow rate in the range 10-116 L/s; average pressure reduction in the range 12-53 m). Therefore, energy production accounts for actual flow rate and head variability over the year. The conversion efficiency is also estimated, for both the whole water distribution network and the PAT alone

The Tuning System for the HIE-ISOLDE High-Beta Quarter Wave Resonator

A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W on cavity walls. A tuning system is required in order to both minimize the forward power variation in beam operation and to compensate the unavoidable uncertainties in the frequency shift during the cool-down process. The tuning system has to fulfil a complex combination of RF, structural and thermal requirements. The paper presents the functional specifications and details the tuning system RF and mechanical design and simulations. The results of the tests performed on a prototype system are discussed and the industrialization strategy is presented in view of final production.Comment: 5 pages, The 16th International Conference on RF Superconductivity (SRF2013), Paris, France, Sep 23-27, 201