Continuous combined microwave and hot air treatment of apples for fruit fly (Bactrocera tryoni and B. jarvisi) disinfestation

Apples at 24 ± 2 °C were heated in a pilot scale hot air assisted (40 °C) continuous pentagonal microwave system, to evaluate the effectiveness of this treatment on insect mortality (variety Mutsu) and fruit quality (variety Granny Smith). An average temperature of 53.4 ± 1.3 °C at core, bottom and flesh of the apple was recorded at the end of the treatment. One hundred percent mortality of the most tolerant stage of Queensland fruit fly (Bactrocera tryoni, Froggatt) and Jarvis's fruit fly (Bactrocera jarvisi, Tryon), were observed when the Mortality value (M52, equivalent time of isothermal treatment at 52 °C) at the slowest heating point applicable for each experiment was ≥ 50 min and ≥ 37 min, respectively. Results showed that microwave heat treatment is effective for insect disinfestation without any adverse impact on total soluble solids, flesh or peel firmness of the treated apples. The treated apples recorded a significantly higher pH and lower ion leakage than the untreated apples after 3 or 4 weeks. Therefore, the microwave heat treatment has the potential to be developed as an alternative chemical free quarantine treatment against economically significant insect pests. Industrial relevance Hot air assisted microwave heating of fruits and vegetables, is more cost effective compared to vapour heat treatment and ionising radiation for disinfestation of insects. Microwave treatment is environmentally friendly compared to fumigation and chemical treatments. Hot air assisted microwave disinfestation can be performed at farms or centralised pack houses since the capital cost would be comparatively lower than vapour heat or ionising radiation treatments

A randomised trial of the effect of omega-3 polyunsaturated fatty acid supplements on the human intestinal microbiota

Objective; Omega-3 polyunsaturated fatty acids (PUFAs) have anticolorectal cancer (CRC) activity. The intestinal microbiota has been implicated in colorectal carcinogenesis. Dietary omega-3 PUFAs alter the mouse intestinal microbiome compatible with antineoplastic activity. Therefore, we investigated the effect of omega-3 PUFA supplements on the faecal microbiome in middle-aged, healthy volunteers (n=22). Design A randomised, open-label, cross-over trial of 8 weeks’ treatment with 4 g mixed eicosapentaenoic acid/docosahexaenoic acid in two formulations (soft-gel capsules and Smartfish drinks), separated by a 12-week ‘washout’ period. Faecal samples were collected at five time-points for microbiome analysis by 16S ribosomal RNA PCR and Illumina MiSeq sequencing. Red blood cell (RBC) fatty acid analysis was performed by liquid chromatography tandem mass spectrometry. Results; Both omega-3 PUFA formulations induced similar changes in RBC fatty acid content, except that drinks were associated with a larger, and more prolonged, decrease in omega-6 PUFA arachidonic acid than the capsule intervention (p=0.02). There were no significant changes in α or β diversity, or phyla composition, associated with omega-3 PUFA supplementation. However, a reversible increased abundance of several genera, including Bifidobacterium, Roseburia and Lactobacillus was observed with one or both omega-3 PUFA interventions. Microbiome changes did not correlate with RBC omega-3 PUFA incorporation or development of omega-3 PUFA-induced diarrhoea. There were no treatment order effects. Conclusion; Omega-3 PUFA supplementation induces a reversible increase in several short-chain fatty acid-producing bacteria, independently of the method of administration. There is no simple relationship between the intestinal microbiome and systemic omega-3 PUFA exposure. Trial registration number; ISRCTN18662143

In vitro and in vivo modeling of lipid bioaccessibility and digestion from almond muffins: the importance of the cell-wall barrier mechanism

This study compares in vitro and in vivo models of lipid digestion from almond particles within a complex food matrix (muffins) investigating whether the cell-wall barrier regulates the bioaccessibility of nutrients within this matrix. Muffins containing small (AF) or large (AP) particles of almond were digested in triplicate using an in vitro dynamic gastric model (DGM, 1 h) followed by a static duodenal digestion (8 h). AF muffins had 97.1 ± 1.7% of their lipid digested, whereas AP muffins had 57.6 ± 1.1% digested. In vivo digestion of these muffins by an ileostomy volunteer (0–10 h) gave similar results with 96.5% and 56.5% lipid digested, respectively. The AF muffins produced a higher postprandial triacylglycerol iAUC response (by 61%) than the AP muffins. Microstructural analysis showed that some lipid remained encapsulated within the plant tissue throughout digestion. The cell-wall barrier mechanism is the main factor in regulating lipid bioaccessibility from almond particles

Design of bio-nanosystems for oral delivery of functional compounds

Nanotechnology has been referred to as one of the most interesting topics in food technology due to the potentialities of its use by food industry. This calls for studying the behavior of nanosystems as carriers of biological and functional compounds aiming at their utilization for delivery, controlled release and protection of such compounds during food processing and oral ingestion. This review highlights the principles of design and production of bio-nanosystems for oral delivery and their behavior within the human gastrointestinal (GI) tract, while providing an insight into the application of reverse engineering approach to the design of those bio-nanosystems. Nanocapsules, nanohydrogels, lipid-based and multilayer nanosystems are discussed (in terms of their main ingredients, production techniques, predominant forces and properties) and some examples of possible food applications are given. Phenomena occurring in in vitro digestion models are presented, mainly using examples related to the utilization of lipid-based nanosystems and their physicochemical behavior throughout the GI tract. Furthermore, it is shown how a reverse engineering approach, through two main steps, can be used to design bio-nanosystems for food applications, and finally a last section is presented to discuss future trends and consumer perception on food nanotechnology.Miguel A. Cerqueira, Ana C. Pinheiro, Helder D. Silva, Philippe E. Ramos, Ana I. Bourbon, Oscar L. Ramos (SFRH/BPD/72753/2010, SFRH/BD/48120/2008, SFRH/BD/81288/2011, SFRH/BD/80800/2011, SFRH/BD/73178/2010 and SFRH/BPD/80766/2011, respectively) are the recipients of a fellowship from the Fundacao para a Ciencia e Tecnologia (FCT, POPH-QREN and FSE Portugal). Maria L. Flores-Lopez thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant number: 215499/310847). The support of EU Cost Actions FA0904 and FA1001 is gratefully acknowledged

Edible bio-based nanostructures: delivery, absorption and potential toxicity

The development of bio-based nanostructures as nanocarriers of bioactive compounds to specific body sites has been presented as a hot topic in food, pharmaceutical and nanotechnology fields. Food and pharmaceutical industries seek to explore the huge potential of these nanostructures, once they can be entirely composed of biocompatible and non-toxic materials. At the same time, they allow the incorporation of lipophilic and hydrophilic bioactive compounds protecting them against degradation, maintaining its active and functional performance. Nevertheless, the physicochemical properties of such structures (e.g., size and charge) could change significantly their behavior in the gastrointestinal (GI) tract. The main challenges in the development of these nanostructures are the proper characterization and understanding of the processes occurring at their surface, when in contact with living systems. This is crucial to understand their delivery and absorption behavior as well as to recognize potential toxicological effects. This review will provide an insight into the recent innovations and challenges in the field of delivery via GI tract using bio-based nanostructures. Also, an overview of the approaches followed to ensure an effective deliver (e.g., avoiding physiological barriers) and to enhance stability and absorptive intestinal uptake of bioactive compounds will be provided. Information about nanostructures potential toxicity and a concise description of the in vitro and in vivo toxicity studies will also be given.Joana T. Martins, Oscar L. Ramos, Ana C. Pinheiro, Ana I. Bourbon, Helder D. Silva and Miguel A. Cerqueira (SFRH/BPD/89992/2012, SFRH/BPD/80766/2011, SFRH/BPD/101181/2014, SFRH/BD/73178/2010, SFRH/BD/81288/2011, and SFRH/BPD/72753/2010, respectively) are the recipients of a fellowship from the Fundacao para a Ciencia e Tecnologia (FCT, POPH-QREN and FSE, Portugal). The authors thank the FCT Strategic Project PEst-OE/EQB/LA0023/2013 and the project "BioInd-Biotechnology and Bioengineering for improved Industrial and Agro-Food processes," REF.NORTE-07-0124-FEDER-000028, co-funded by the Programa Operacional Regional do Norte (ON.2-O Novo Norte), QREN, FEDER. We also thank to the European Commission: BIOCAPS (316265, FP7/REGPOT-2012-2013.1) and Xunta de Galicia: Agrupamento INBIOMED (2012/273) and Grupo con potencial de crecimiento. The support of EU Cost Action FA1001 is gratefully acknowledged

Oat fiber as a carrier for curcuminoids

The curcuminoid-carrying potential of oat fiber was examined as a potential route to overcome the low aqueous solubility of curcuminoids. Aqueous dispersions of oat fiber were mixed with curcuminoids solubilized in ethanol to obtain curcuminoids-oat fiber (1% w/w) dispersions in aqueous ethanol (2% v/v). Centrifugation of the curcuminoids-oat fiber dispersions resulted in a supernatant (95.3% w/w: 0.11% w/w protein, 0.17% w/w β-glucan) and precipitate (4.74% w/w: 0.18% w/w protein, 0.11% w/w β-glucan) with the curcuminoids being almost equally partitioned into both fractions. Curcuminoids solubility in the supernatant was markedly greater than that in aqueous ethanol and water. The curcuminoids were in the amorphous state in the precipitated fraction and were more stable to degradation than the curcuminoids in the supernatant. These studies show the potential of oat fiber as a carrier for curcuminoids into functional foods.Sara Sayanjali, Luz Sanguansri, Roman Buckow, Sally Gras and Mary Ann Augusti

The effect of extrusion on the functional properties of oat fibre

Extrusion is an effective method for the production of healthier snack foods, such as oat fibre products. The effect of this process on the physicochemical properties of oat fibre preparations containing high levels of β-glucan, however, has not been fully addressed. Oat fibre containing 28 g/100 g β-glucan was extruded using two levels of feed moisture (50 g/100 g or 60 g/100 g of feed materials) and two screw speeds (200 rpm or 300 rpm) at a constant barrel temperature profile (80 °C, 90 °C, 100 °C, 110 °C). A higher specific mechanical energy applied during extrusion correlated with an increase in specific surface area, greater sorption of water vapour and higher sorption energy for the monolayer of water associated with the surface of extruded products. The pasting properties of oat fibre were largely retained and the extent of molecular fragmentation was small, as the molecular weight of the soluble fraction, total soluble solids and water absorption index were not significantly altered. These data demonstrate that extrusion under these conditions can be applied to oat fibre preparations with high β-glucan content, resulting in oat products that retain their functional properties and potential health benefits.Sara Sayanjali, Danyang Ying, Luz Sanguansri, Roman Buckow, Mary Ann Augustin, Sally L. Gra

Extrusion of a curcuminoid-enriched oat fiber-corn-based snack product

Extruded snack products were made from an oat fiber-corn flour matrix fortified with 1.5% (w/w) curcuminoids (750 mg curcuminoids/100 g) to improve the solubility and stability of curcuminoids. The effects of extruder feed moisture content (21%, 28%, and 35%) and screw speed (200 and 300 rpm) on the extrusion parameters and physical properties of final snacks were investigated. Curcuminoids lost during extrusion and curcuminoids loss during subsequent drying of extrudates were analyzed, to separate the losses occurring in each unit process. Drying post extrusion (at 50 °C for 4 hr) was essential to obtain a crunchy shelf stable product (5% moisture). Curcuminoids loss during extrusion was from 17% to 84%, with high loss for the extrusion with low feed moisture content (21%). A further curcuminoids loss of 4% to 44% occurred during drying, with much higher loss for the extrudate with high moisture content. Total curcuminoids retained after extrusion and drying was 12% to 41% (59% to 88% loss), equivalent to 180 to 616 mg curcuminoids retained per 100 g snack, levels within recommended daily dose. Curcuminoids retained after drying was stable during 80 days of storage at 25 °C. The results highlighted the importance of understanding the impact of each unit process separately (for example, extrusion and drying) on the stability of curcuminoids for the development of healthier extruded snacks. PRACTICAL APPLICATION: Extruded snacks products were developed by fortifying the snacks with oat fiber and curcuminoids in order to address the need for a healthy ready to eat food products. Some extrusion characteristics were selected to produce snack products which have favorable properties in terms of consumer acceptance.Sara Sayanjali, Luz Sanguansri, Danyang Ying, Roman Buckow, Sally Gras and Mary Ann Augusti