3,935 research outputs found

    Scattering of surface plasmons by one-dimensional periodic nanoindented surfaces

    Full text link
    In this work, the scattering of surface plasmons by a finite periodic array of one-dimensional grooves is theoretically analyzed by means of a modal expansion technique. We have found that the geometrical parameters of the array can be properly tuned to achieve optimal performance of the structure either as a Bragg reflector or as a converter of surface plasmons into light. In this last case, the emitted light is collimated within a few degrees cone. Importantly, we also show that a small number of indentations in the array are sufficient to fully achieve its functional capabilities.Comment: 5 pages, 5 figures; changed sign convention in some definition

    Scattering of surface plasmon polaritons by one-dimensional inhomogeneities

    Get PDF
    The scattering of surface plasmons polaritons by a one-dimensional defect of the surface is theoretically studied, by means of both Rayleigh and modal expansions. The considered defects are either relief perturbations or variations in the permittivity of the metal. The dependence of transmission, reflection and out-of-plane scattering on parameters defining the defect is presented. We find that the radiated energy is forwardly directed (with respect to the surface plasmon propagation) in the case of an impedance defect. However, for relief defects, the radiated energy may be directed into backward or forward (or both) directions, depending on the defect width.Comment: 10 pages, 5 figures, corrected typos, some minor modifications in figures. Accepted in Phys. Rev.

    Analysis of Deterioration in a Plasma Focus Device

    Get PDF
    Indexación: Scopus.The Plasma Focus (PF) is a kind of dense transient plasmas in with high-pulsed voltage. To produce devices for eld application it is necessary to obtain PF equipment able to operate for a long period of time. Thus, a reliability analysis is indispensable. In this work a reliability analysis program for plasma focus devices is presented. The program considers a criticality analysis using Failure Modes and Effects Criticality Analysis (FMECA) to identify the most important failure modes of the system. Said failure modes are studied operating the Plasma Focus for many cycles, obtaining from them the characteristic curves of V(t) and İ(t). Feature Extraction (FE) techniques are applied to obtain a list of parameters that correlate to the degrading process. Furthermore, Machine Learning tools are used to learn from the obtained data, linking the changes in these parameters during its life cycle to the decay of the system in hope for future implementation of a predictive maintenance system and a reference for data analysis and prediction in PFs. The study was applied to a portable plasma focus device operated at 2 joules of stored energy. © Published under licence by IOP Publishing Ltd.The work is supported by IAEA CRP contract 20370 and by grant ACT-1115, CONICYT, Chile.https://iopscience.iop.org/article/10.1088/1742-6596/1043/1/01204

    Phase evolution in reaction sintered zirconium titanate based materials

    Get PDF
    11 páginas, 17 figuras.-- El pdf del artículo es la versión post-print.Zirconium titanate materials are proposed for structural components for which fully reacted and relatively large pieces are required. In this work the phase evolution in slip cast compacts constituted by equimolar mixtures of TiO2 and ZrO2 stabilized with 3 mol% of Y2O3 at high temperature is studied, to establish the basis to design suitable thermal treatments for ZrO2(Y2O3)–TiO2 materials. The temperatures at which the processes involved in the reaction sintering occurred were identified by constant heating rate experiments. Phase and microstructure analyses have been performed on specimens treated at the identified temperatures and air quenched. Then the adequate temperature range to get fully reacted and dense materials has been deduced. Materials treated at 1500 ◦C to 2 h were constituted by Zr5Ti7O24 as major phase, a solid solution of TiO2 and Y2O3 in c-ZrO2 as secondary phase and a ZrO2–TiO2–Y2O3 non-stoichiometric compound with pyrochlore structure as minor phase. Pyrochlore was demonstrated to be a metastable phase at 1500 ◦C.This work has been supported by the Spanish Ministry of Education and Science under contracts MEC MAT2006- 13480 C02-01 and MAT2007-64486 C07-02. E. López-López acknowledges to Community of Madrid (Spain) and European Social Fund for economical support by CPI/0552/2007 contract.Peer reviewe

    Matching in vitro bioaccessibility of polyphenols and antioxidant capacity of soluble coffee by Boosted Regression Trees

    Get PDF
    The aim of this study was to evaluate changes in polyphenol profile and antioxidant capacity of five soluble coffees throughout a simulated gastro-intestinal digestion, including absorption through a dialysis membrane. Our results demonstrate that both polyphenol content and antioxidant capacity were characteristic for each type of studied coffee, showing a drop after dialysis. Twenty-seven compounds were identified in coffee by HPLC-MS, while only 14 of them were found after dialysis. Green+roasted coffee blend and chicory+coffee blend showed the highest and lowest content of polyphenols and antioxidant capacity before in vitro digestion and after dialysis, respectively. Canonical correlation analysis showed significant correlation between the antioxidant capacity and the polyphenol profile before digestion and after dialysis. Furthermore, boosted regression trees analysis (BRT) showed that only four polyphenol compounds (5-p-coumaroylquinic acid, quinic acid, coumaroyl tryptophan conjugated, and 5-O-caffeoylquinic acid) appear to be the most relevant to explain the antioxidant capacity after dialysis, these compounds being the most bioaccessible after dialysis. To our knowledge, this is the first report matching the antioxidant capacity of foods with the polyphenol profile by BRT, which opens an interesting method of analysis for future reports on the antioxidant capacity of foods.Fil: Podio, Natalia Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Ciencia y Tecnología de Alimentos Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Ciencia y Tecnología de Alimentos Córdoba; ArgentinaFil: López Froilán, Rebeca. Universidad Complutense de Madrid; EspañaFil: Ramirez Moreno, Esther. Universidad Autónoma de Estado de Hidalgo; México. Universidad Complutense de Madrid; EspañaFil: Bertrand, Lidwina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Córdoba. Centro de Investigaciones en Bioquímica Clínica e Inmunología; ArgentinaFil: Baroni, María Verónica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Ciencia y Tecnología de Alimentos Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Ciencia y Tecnología de Alimentos Córdoba; ArgentinaFil: Pérez Rodríguez, María L.. Universidad Complutense de Madrid; EspañaFil: Sánchez Mata, María Cortes. Universidad Complutense de Madrid; EspañaFil: Wunderlin, Daniel A.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Ciencia y Tecnología de Alimentos Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Ciencia y Tecnología de Alimentos Córdoba; Argentin
    corecore