5,336 research outputs found
Recent advances in multidisciplinary optimization of rotorcraft
A joint activity involving NASA and Army researchers at NASA LaRC to develop optimization procedures to improve the rotor blade design process by integrating appropriate disciplines and accounting for all of the important interactions among the disciplines is described. The disciplines involved include rotor aerodynamics, rotor dynamics, rotor structures, airframe dynamics, and acoustics. The work is focused on combining these five key disciplines in an optimization procedure capable of designing a rotor system to satisfy multidisciplinary design requirements. Fundamental to the plan is a three-phased approach. In phase 1, the disciplines of blade dynamics, blade aerodynamics, and blade structure are closely coupled while acoustics and airframe dynamics are decoupled and are accounted for as effective constraints on the design for the first three disciplines. In phase 2, acoustics is integrated with the first three disciplines. Finally, in phase 3, airframe dynamics is integrated with the other four disciplines. Representative results from work performed to date are described. These include optimal placement of tuning masses for reduction of blade vibratory shear forces, integrated aerodynamic/dynamic optimization, and integrated aerodynamic/dynamic/structural optimization. Examples of validating procedures are described
Bragg Scattering as a Probe of Atomic Wavefunctions and Quantum Phase Transitions in Optical Lattices
We have observed Bragg scattering of photons from quantum degenerate
Rb atoms in a three-dimensional optical lattice. Bragg scattered light
directly probes the microscopic crystal structure and atomic wavefunction whose
position and momentum width is Heisenberg-limited. The spatial coherence of the
wavefunction leads to revivals in the Bragg scattered light due to the atomic
Talbot effect. The decay of revivals across the superfluid to Mott insulator
transition indicates the loss of superfluid coherence.Comment: 5 pages, 4 figure
The Distance to the Large Magellanic Cloud from the Eclipsing Binary HV2274
The distance to the Large Magellanic Cloud (LMC) is crucial for the
calibration of the Cosmic Distance Scale. We derive a distance to the LMC based
on an analysis of ground-based photometry and HST-based spectroscopy and
spectrophotometry of the LMC eclipsing binary system HV2274. Analysis of the
optical light curve and HST/GHRS radial velocity curve provides the masses and
radii of the binary components. Analysis of the HST/FOS UV/optical
spectrophotometry provides the temperatures of the component stars and the
interstellar extinction of the system. When combined, these data yield a
distance to the binary system. After correcting for the location of HV2274 with
respect to the center of the LMC, we find d(LMC) = 45.7 +/- 1.6 kpc or DM(LMC)
= 18.30 +/- 0.07 mag. This result, which is immune to the metallicity-induced
zero point uncertainties that have plagued other techniques, lends strong
support to the ``short'' LMC distance scale as derived from a number of
independent methods.Comment: 6 pages, including 2 pages of figures. Newly available optical (B and
V) photometry has revealed -- and allowed the elimination of -- a systematic
error in the previously reported determination of E(B-V) for HV2274. The new
result is E(B-V) = 0.12 mag (as compared to the value of 0.083 reported in
the original submission) and produces a DECREASE in the distance modulus of
HV2274 by 0.12 mag. ApJ Letters, in pres
Appendix: Results obtained to date
Optimization procedures are described for the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. Progress is reported in the areas of aerodynamic performance optimization, dynamic optimization, optimum placement of tuning masses for vibration reduction, and structural optimization. Selected results from these activities are highlighted in this appendix
Hot and repulsive traffic flow
We study a message passing model, applicable also to traffic problems. The
model is implemented in a discrete lattice, where particles move towards their
destination, with fluctuations around the minimal distance path. A repulsive
interaction between particles is introduced in order to avoid the appearance of
traffic jam. We have studied the parameter space finding regions of fluid
traffic, and saturated ones, being separated by abrupt changes. The improvement
of the system performance is also explored, by the introduction of a
non-constant potential acting on the particles. Finally, we deal with the
behavior of the system when temporary failures in the transmission occurs.Comment: 22 pages, uuencoded gzipped postscript file. 11 figures include
Linking dust emission to fundamental properties in galaxies: The low-metallicity picture
In this work, we aim at providing a consistent analysis of the dust
properties from metal-poor to metal-rich environments by linking them to
fundamental galactic parameters. We consider two samples of galaxies: the Dwarf
Galaxy Survey (DGS) and KINGFISH, totalling 109 galaxies, spanning almost 2 dex
in metallicity. We collect infrared (IR) to submillimetre (submm) data for both
samples and present the complete data set for the DGS sample. We model the
observed spectral energy distributions (SED) with a physically-motivated dust
model to access the dust properties. Using a different SED model (modified
blackbody), dust composition (amorphous carbon), or wavelength coverage at
submm wavelengths results in differences in the dust mass estimate of a factor
two to three, showing that this parameter is subject to non-negligible
systematic modelling uncertainties. For eight galaxies in our sample, we find a
rather small excess at 500 microns (< 1.5 sigma). We find that the dust SED of
low-metallicity galaxies is broader and peaks at shorter wavelengths compared
to more metal-rich systems, a sign of a clumpier medium in dwarf galaxies. The
PAH mass fraction and the dust temperature distribution are found to be driven
mostly by the specific star-formation rate, SSFR, with secondary effects from
metallicity. The correlations between metallicity and dust mass or total-IR
luminosity are direct consequences of the stellar mass-metallicity relation.
The dust-to-stellar mass ratios of metal-rich sources follow the well-studied
trend of decreasing ratio for decreasing SSFR. The relation is more complex for
highly star-forming low-metallicity galaxies and depends on the chemical
evolutionary stage of the source (i.e., gas-to-dust mass ratio). Dust growth
processes in the ISM play a key role in the dust mass build-up with respect to
the stellar content at high SSFR and low metallicity. (abridged)Comment: 44 pages (20 pages main body plus 5 Appendices), 11 figures, 9
tables, accepted for publication in A&
Photometric monitoring of the doubly imaged quasar UM673: possible evidence for chromatic microlensing
We present the results of two-band CCD photometric monitoring of the
gravitationally lensed quasar Q 0142-100 (UM 673).The data, obtained at ESO-La
Silla with the 1.54 m Danish telescope in the Gunn i-band (October 1998 -
September 1999) and in the Johnson V-band (October 1998 to December 2001), were
analyzed using three different photometric methods. The light-curves obtained
with all methods show variations, with a peak-to-peak amplitude of 0.14
magnitude in . Although it was not possible to measure the time delay
between the two lensed QSO images, the brighter component displays possible
evidence for microlensing: it becomes bluer as it gets brighter, as expected
under the assumption of differential magnification of a quasar accretion diskComment: Accepted for publication in Astronomy & Astrophysics; 8 pages, 7
figure
Supraglacial debris thickness variability: Impact on ablation and relation to terrain properties
Abstract. Shallow ground penetrating radar (GPR) surveys are used to characterize the small-scale spatial variability of supraglacial debris thickness on a Himalayan glacier. Debris thickness varies widely over short spatial scales. Comparison across sites and glaciers suggests that the skewness and kurtosis of the debris thickness frequency distribution decrease with increasing mean debris thickness, and we hypothesise that this is related to the degree of gravitational reworking the debris cover has undergone, and is therefore a proxy for the maturity of surface debris covers. In the cases tested here, using a single mean debris thickness value instead of accounting for the observed small-scale debris thickness variability underestimates modelled midsummer sub-debris ablation rates by 11–30 %. While no simple relationship is found between measured debris thickness and morphometric terrain parameters, analysis of the GPR data in conjunction with high-resolution terrain models provides some insight to the processes of debris gravitational reworking. Periodic sliding failure of the debris, rather than progressive mass diffusion, appears to be the main process redistributing supraglacial debris. The incidence of sliding is controlled by slope, aspect, upstream catchment area and debris thickness via their impacts on predisposition to slope failure and meltwater availability at the debris-ice interface. Slope stability modelling suggests that the percentage of the debris-covered glacier surface area subject to debris instability can be considerable at glacier scale, indicating that up to 22 % of the debris covered area is susceptible to developing ablation hotspots associated with patches of thinner debris.
Reynolds International Lt
Strong divergent selection at multiple loci in two closely related species of ragworts adapted to high and low elevations on Mount Etna
- …