Butt Joint Reinforcement in Parallel-Laminated Veneer (PLV) Lumber

Parallel-laminated veneer (PLV) is a high-strength structural material consisting of thin parallel-laminated wood veneers. The use of graphite-cloth reinforcement, placed on either side of a butt joint in 1 1/2- by 3 1/2- by 32-inch Douglas-fir PLV tensile members, was assessed. The finite-element method of analysis was used to predict the behavior in different unreinforced and reinforced butt-jointed PLV tensile members. Relationships between the reinforcing parameters—length, modulus of elasticity, and thickness—and the stresses in the wood and reinforcement components were developed by regression analysis techniques. The reinforcing mechanism reduced the peak stresses at the butt joint and hence increased the ultimate strength of the member. Design of PLV material whose strength is limited by shear stresses that develop at the butt joint is facilitated by use of the proposed relationships.Experimental testing confirmed the predictions of the finite-element analysis. Failure initiated at the unreinforced joint in the specimens. Average tensile strength increased and variability decreased in reinforced specimens. Application of a small amount of reinforcement at the butt joint has been shown to enhance PLV performance

Fiber-Reinforced Wood Composites

The technical feasibility of producing internally reinforced laminated wood is evaluated experimentally. Numerous fiber reinforcements and adhesives are assessed, and effects of several processing and environmental parameters are included. Results demonstrate the increased strength and stiffness to be achieved under both tension and flexure by adding fiber reinforcement. Glass reinforcement is particularly suitable

Combining Progressive Nodal Release with the Virtual Crack Closure Technique to Model Fatigue Delamination Growth Without Re-Meshing

The present work summarizes an approach to model mixed-mode 3D fatigue crack growth using the Virtual Crack Closure Technique (VCCT) without requiring re-meshing. It is demonstrated that the proposed approach can be used to simulate crack shapes that do not conform to the underlying mesh. The proposed approach relies solely on Paris Law characterization data to model delamination growth. Growth is determined as a post-processing step at the end of each increment, and hence no convergence issues associated with the progressive nodal release are encountered. This approach can be readily applied using standard solid element formulations and is implemented via an interface user element in Abaqus/Standard

Incorporating Inductances in Tissue-Scale Models of Cardiac Electrophysiology

In standard models of cardiac electrophysiology, including the bidomain and monodomain models, local perturbations can propagate at infinite speed. We address this unrealistic property by developing a hyperbolic bidomain model that is based on a generalization of Ohm's law with a Cattaneo-type model for the fluxes. Further, we obtain a hyperbolic monodomain model in the case that the intracellular and extracellular conductivity tensors have the same anisotropy ratio. In one spatial dimension, the hyperbolic monodomain model is equivalent to a cable model that includes axial inductances, and the relaxation times of the Cattaneo fluxes are strictly related to these inductances. A purely linear analysis shows that the inductances are negligible, but models of cardiac electrophysiology are highly nonlinear, and linear predictions may not capture the fully nonlinear dynamics. In fact, contrary to the linear analysis, we show that for simple nonlinear ionic models, an increase in conduction velocity is obtained for small and moderate values of the relaxation time. A similar behavior is also demonstrated with biophysically detailed ionic models. Using the Fenton-Karma model along with a low-order finite element spatial discretization, we numerically analyze differences between the standard monodomain model and the hyperbolic monodomain model. In a simple benchmark test, we show that the propagation of the action potential is strongly influenced by the alignment of the fibers with respect to the mesh in both the parabolic and hyperbolic models when using relatively coarse spatial discretizations. Accurate predictions of the conduction velocity require computational mesh spacings on the order of a single cardiac cell. We also compare the two formulations in the case of spiral break up and atrial fibrillation in an anatomically detailed model of the left atrium, and [...].Comment: 20 pages, 12 figure

The Importance of Nebular Continuum and Line Emission in Observations of Young Massive Star Clusters

In this spectroscopic study of infant massive star clusters, we find that continuum emission from ionized gas rivals the stellar luminosity at optical wavelengths. In addition, we find that nebular line emission is significant in many commonly used broad-band HST filters including the F814W I-band, the F555W V-band and the F435W B-band. Two young massive clusters (YMCs) in NGC 4449 were targeted for spectroscopic observations after Reines et al. (2008a) discovered an F814W I-band excess in their photometric study of radio-detected clusters in the galaxy. The spectra were obtained with the Dual Imaging Spectrograph on the 3.5 m APO telescope. We supplement these data with HST and SDSS photometry. By comparing our data to the Starburst99 and GALEV models, we find that nebular continuum emission competes with the stellar light in our observations and that the relative contribution is largest in the U- and I-bands, where the Balmer and Paschen jumps are located. The spectra also exhibit strong line emission including the [SIII] 9069,9532 lines in the HST F814W I-band. We find that the combination of nebular continuum and line emission can account for the F814W I-band excess found by Reines et al. (2008a). In an effort to provide a benchmark for estimating the impact of ionized gas emission on photometric observations of YMCs, we compute the relative contributions of the stellar continuum, nebular continuum, and emission lines to the total flux of a 3 Myr-old cluster through various HST filter/instrument combinations, including filters in the WFC3. We urge caution when comparing observations of YMCs to evolutionary synthesis models since nebular emission can have a large impact on magnitudes and colors of young (< 5 Myr) clusters, significantly affecting inferred properties such as ages, masses and extinctions. (Abridged)Comment: 13 pages, 11 figures, Accepted for Publication in Ap

Effects of yeast combined with chromium propionate on growth performance and carcass quality of finishing steers

Citation: Vanbibber-Krueger, C. L., Axman, J. E., Gonzalez, J. M., Vahl, C. I., & Drouillard, J. S. (2016). Effects of yeast combined with chromium propionate on growth performance and carcass quality of finishing steers. Journal of Animal Science, 94(7), 3003-3011. doi:10.2527/jas2016-0454A combination of yeast and chromium propionate (Y+Cr) was added to the diets of crossbred finishing steers (n = 504; 402 kg ± 5.76 initial BW) to evaluate impact on feedlot performance and carcass traits. We hypothesized supplementation of Y+Cr would increase growth of feedlot steers. Steers with initial plasma glucose concentrations ?6.0 mM were stratified by initial BW and randomly allocated, within strata, to receive 0 (control) or 3.3 g/d Y+Cr. Steers were further divided into heavy and light weight blocks with 6 pens/diet within each weight block. Cattle were housed in dirt-surfaced pens with 21 steers/pen and had ad libitum access to feed. Body weights were measured at 21-d intervals. Blood samples were collected on d 49 and 94 from a subset of steers (5/pen) for analyses of plasma glucose and lactate concentrations. At the end of the finishing phase, animals were weighed and transported 450 km to an abattoir in Holcomb, KS. Severity of liver abscesses and HCW were collected the day of harvest, and after 36 h of refrigeration, USDA yield and quality grades, LM area, and 12th rib subcutaneous fat thickness were determined. There were no treatment × time × weight block interactions (P > 0.05) and no treatment × block interaction for ADG, DMI, or final BW (P ? 0.06), but a treatment × block interaction (P = 0.03) was observed for G:F, in which control, light cattle had poorer efficiency compared with other groups. Treatment × weight group interactions were observed for overall yield grade and carcasses that graded yield grade 1 (P ? 0.04). Light steers supplemented with Y+Cr had decreased overall yield grade and increased percentage of carcasses grading yield grade 1 compared with their control counterparts, with no differences observed for heavy steers. Regardless of weight group, a greater percentage of carcasses from steers supplemented with Y+Cr graded yield grade 2 (P = 0.03) and fewer carcasses from steers supplemented Y+Cr graded yield grade 3 (P 0.10). Overall, yeast in combination with chromium propionate may improve feed efficiency and decrease yield grade of light cattle but had no effect on remaining carcass traits and blood constituents. © 2016 American Society of Animal Science. All rights reserved

Surface-induced charge state conversion of nitrogen-vacancy defects in nanodiamonds

We present a study of the charge state conversion of single nitrogen-vacancy (NV) defects hosted in nanodiamonds (NDs). We first show that the proportion of negatively-charged NV$^{-}$ defects, with respect to its neutral counterpart NV$^{0}$, decreases with the size of the ND. We then propose a simple model based on a layer of electron traps located at the ND surface which is in good agreement with the recorded statistics. By using thermal oxidation to remove the shell of amorphous carbon around the NDs, we demonstrate a significant increase of the proportion of NV$^{-}$ defects in 10-nm NDs. These results are invaluable for further understanding, control and use of the unique properties of negatively-charged NV defects in diamondComment: 6 pages, 4 figure

Sovereign debt restructuring : the judge, the vultures and creditor rights

What role did the US courts play in the Argentine debt swap of 2005? What implications does this have for the future of creditor rights in sovereign bond markets? The judge in the Argentine case has, it appears, deftly exploited creditor heterogeneity – between holdouts seeking capital gains and institutional investors wanting a settlement – to promote a swap with a supermajority of creditors. Our analysis of Argentine debt litigation reveals a ‘judge-mediated’ sovereign debt restructuring, which resolves the key issues of Transition and Aggregation - two of the tasks envisaged for the IMF’s still-born Sovereign Debt Restructuring Mechanism. For the future, we discuss how judge-mediated sovereign debt restructuring (together with creditor committees) could complement the alternative promoted by the US Treasury, namely collective action clauses in sovereign bond contracts

Equality of opportunity and educational achievement in Portugal

Portugal has one of the highest levels of income inequality in Europe, and low wages and unemployment are concentrated among low skill individuals. Education is an important determinant of inequality. However, there are large differences in the educational attainment of different individuals in the population, and the sources of these differences emerge early in the life-cycle when families play a central role in individual development. We estimate that most of the variance of school achievement at age 15 is explained by family characteristics. Observed school inputs explain very little of adolescent performance. Children from highly educated parents benefit of rich cultural environments in the home and become highly educated adults. Education policy needs to be innovative: (1) it needs to explicitly recognize the fundamental long run role of families on child development; (2) it needs to acknowledge the failure of traditional input based policies