19 research outputs found

    Ferromagnetic resonance study of sputtered Co|Ni multilayers

    Full text link
    We report on room temperature ferromagnetic resonance (FMR) studies of [tt Co∣2t|2t Ni]×\timesN sputtered films, where 0.1≤t≤0.60.1 \leq t \leq 0.6 nm. Two series of films were investigated: films with same number of Co∣|Ni bilayer repeats (N=12), and samples in which the overall magnetic layer thickness is kept constant at 3.6 nm (N=1.2/tt). The FMR measurements were conducted with a high frequency broadband coplanar waveguide up to 50 GHz using a flip-chip method. The resonance field and the full width at half maximum were measured as a function of frequency for the field in-plane and field normal to the plane, and as a function of angle to the plane for several frequencies. For both sets of films, we find evidence for the presence of first and second order anisotropy constants, K1K_1 and K2K_2. The anisotropy constants are strongly dependent on the thickness tt, and to a lesser extent on the total thickness of the magnetic multilayer. The Land\'e g-factor increases with decreasing tt and is practically independent of the multilayer thickness. The magnetic damping parameter α\alpha, estimated from the linear dependence of the linewidth, △H\triangle H, on frequency, in the field in-plane geometry, increases with decreasing tt. This behaviour is attributed to an enhancement of spin-orbit interactions with tt decreasing and in thinner films, to a spin-pumping contribution to the damping.Comment: 18 pages, 13 figure

    Origin of reduced magnetization and domain formation in small magnetite nanoparticles

    Get PDF
    The structural, chemical, and magnetic properties of magnetite nanoparticles are compared. Aberration corrected scanning transmission electron microscopy reveals the prevalence of antiphase boundaries in nanoparticles that have significantly reduced magnetization, relative to the bulk. Atomistic magnetic modelling of nanoparticles with and without these defects reveals the origin of the reduced moment. Strong antiferromagnetic interactions across antiphase boundaries support multiple magnetic domains even in particles as small as 12–14 nm

    Core-shell magnetic morphology of structurally uniform magnetite nanoparticles

    Get PDF
    A new development in small-angle neutron scattering with polarization analysis allows us to directly extract the average spatial distributions of magnetic moments and their correlations with three-dimensional directional sensitivity in any magnetic field. Applied to a collection of spherical magnetite nanoparticles 9.0 nm in diameter, this enhanced method reveals uniformly canted, magnetically active shells in a nominally saturating field of 1.2 T. The shell thickness depends on temperature, and it disappears altogether when the external field is removed, confirming that these canted nanoparticle shells are magnetic, rather than structural, in origin

    Internal magnetic structure of magnetite nanoparticles at low temperature

    Get PDF
    Small-angle neutron scattering with polarization analysis reveals that Fe3O4 nanoparticles with 90 Ã… diameters have ferrimagnetic moments significantly reduced from that of bulk Fe3O4 at 10 K, nominal saturation. Combined with previous results for an equivalent applied field at 200 K, a core-disordered shell picture of a spatially reduced ferrimagnetic core emerges, even well below the bulk blocking temperature. Zero-field cooling suggests that this magnetic morphology may be intrinsic to the nanoparticle, rather than field induced, at 10 K

    Enhanced magnetic properties in antiferromagnetic-core/ferrimagnetic-shell nanoparticles

    Get PDF
    Bi-magnetic core/shell nanoparticles are gaining increasing interest due to their foreseen applications. Inverse antiferromagnetic(AFM)/ferrimagnetic(FiM) core/shell nanoparticles are particularly appealing since they may overcome some of the limitations of conventional FiM/AFM systems. However, virtually no simulations exist on this type of morphology. Here we present systematic Metropolis Monte Carlo simulations of the exchange bias properties of such nanoparticles. The coercivity, H C, and loop shift, H ex, present a non-monotonic dependence with the core diameter and the shell thickness, in excellent agreement with the available experimental data. Additionally, we demonstrate novel unconventional behavior in FiM/AFM particles. Namely, while H C and H ex decrease upon increasing FiM thickness for small AFM cores (as expected), they show the opposite trend for large cores. This presents a counterintuitive FiM size dependence for large AFM cores that is attributed to the competition between core and shell contributions, which expands over a wider range of core diameters leading to non-vanishing H ex even for very large cores. Moreover, the results also hint different possible ways to enhance the experimental performance of inverse core/shell nanoparticles for diverse applications

    Spin waves across three-dimensional, close-packed nanoparticles

    No full text
    Inelastic neutron scattering is utilized to directly measure inter-nanoparticle spin waves, or magnons, which arise from the magnetic coupling between 8.4 nm ferrite nanoparticles that are self-assembled into a close-packed lattice, yet are physically separated by oleic acid surfactant. The resulting dispersion curve yields a physically-reasonable, non-negative energy gap only when the effective Q is reduced by the inter-particle spacing. This Q renormalization strongly indicates that the dispersion is a collective excitation between the nanoparticles, rather than originating from within individual nanoparticles. Additionally, the observed magnons are dispersive, respond to an applied magnetic field, and display the expected temperature-dependent Bose population factor. The experimental results are well explained by a limited parameter model which treats the three-dimensional ordered, magnetic nanoparticles as dipolar-coupled superspins

    Resolving 3D magnetism in nanoparticles using polarization analyzed SANS

    No full text
    Utilizing a polarized 3He cell as an analyzer we were able to perform a full polarization analysis on small-angle neutron scattering (SANS) data from an ensemble of 7 nm magnetite nanoparticles. The results led to clear separation of magnetic and nuclear scattering plus a 3D vectorial decomposition of the magnetism observed. At remanence variation in long-range magnetic correlation length was found to be highly dependent on temperature from 50 to 300 K. Additionally, we were able to compare the magnetic scattering from moments along and perpendicular to an applied field at saturation and in remanence

    Longitudinal polarization analysis in small-angle neutron scattering

    Get PDF
    Due to recent progress in the development of 3 He spin filters, it has only now become possible to perform routinely longitudinal (one-dimensional) neutron-spin analysis (POLARIS) in small-angle neutron scattering (SANS) experiments. It is the purpose of this article to provide a brief introduction into the technique and to discuss first experimental data. In particular, for the most common scattering geometry where the applied magnetic (guide) field is perpendicular to the incident neutron beam, we write down the equations for the non-spin-flip and spin-flip SANS cross sections of a bulk ferromagnet, and we discuss the various angular anisotropies and asymmetries along with some selected experimental results on an FeCr based soft magnetic nanocrystalline alloy. In particular, we show that the analysis of the spin-flip data allows one to obtain the magnitude-squares of the three vector (Fourier) components of the magnetization. Copyright EDP Sciences, SIF, Springer-Verlag Berlin Heidelberg 2010
    corecore